Patch 1/3 changes the driver and updates the binding documentation
(I guess it is still in staging.)
Patches 2/3 and 3/3 add the devicetree nodes to imx23 and imx28 boards.
I'd like to get input whether this is actually desired. On boards where
these regulators would never be enabled this costs a few extra bytes of
RAM for allocation of the device data, because the nodes can't be easily
removed in .dts files which are including the .dtsi files. The alternative
is to add the new nodes to many .dts files, which would be a lot code
duplication.
Harald Geyer (3):
iio: mxs-lradc: Add regulators for current sources
ARM: dts: imx23: Provide regulators for the current sources of the
LRADC
ARM: dts: imx28: Provide regulators for the current sources of the
LRADC
.../bindings/staging/iio/adc/mxs-lradc.txt | 29 ++++
arch/arm/boot/dts/imx23.dtsi | 8 ++
arch/arm/boot/dts/imx28.dtsi | 8 ++
drivers/iio/adc/Kconfig | 1 +
drivers/iio/adc/mxs-lradc.c | 152 +++++++++++++++++++++
5 files changed, 198 insertions(+)
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
