On Thu, Apr 21, 2016 at 06:42:16AM +0530, Laxman Dewangan wrote: > > On Thursday 21 April 2016 05:13 AM, Eduardo Valentin wrote: > >Laxman, > > > >On Tue, Apr 19, 2016 at 12:52:01PM +0530, Laxman Dewangan wrote: > >>In some of platform, thermal sensors like NCT thermistors are > >>connected to the one of ADC channel. The temperature is read by > >>reading the voltage across the sensor resistance via ADC. Lookup > >>table for ADC read value to temperature is referred to get > >>temperature. ADC is read via IIO framework. > >> > >>Add support for thermal sensor driver which read the voltage across > >>sensor resistance from ADC through IIO framework. > >> > >>Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx> > >I really like this driver, as I mentioned before. Just one comment > >though. > > > >>+ > >>+ gti->tz_dev = thermal_zone_of_sensor_register(&pdev->dev, 0, > >>+ gti, &gadc_thermal_ops); > >Why not using the devm_ version you introduced? > > > >Any particular reason? > > > > Yaah, the reason is just to maintain the proper sequence in releasing of > resource during driver unbinding. > > Sequence in probe are: > iio_channel_get() > thermal_zone_of_sensor_register() > > and on release, sensor should be released first before iio channel. > As of now, we do not have devm_iio_channel_get() [I already post patch and > it is accepted by Jonathan in iio sub system] and hence I can not use the > devm_ for sensor register to avoid race. > > However, once the devm_ for iio channel get available in all subsystem (may > be in next release), I will post the patch to use devm_. > > Currently, we can go with these APIs. Ok. We can have it in this way then. > > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
