Use SMBus "block read" protocol only when supported by adapter. Signed-off-by: Gregor Boirie <gregor.boirie@xxxxxxxxxx> --- drivers/iio/common/st_sensors/st_sensors_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c index 98cfee29..b43aa36 100644 --- a/drivers/iio/common/st_sensors/st_sensors_i2c.c +++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c @@ -48,8 +48,8 @@ static int st_sensors_i2c_read_multiple_byte( if (multiread_bit) reg_addr |= ST_SENSORS_I2C_MULTIREAD; - return i2c_smbus_read_i2c_block_data(to_i2c_client(dev), - reg_addr, len, data); + return i2c_smbus_read_i2c_block_data_or_emulated(to_i2c_client(dev), + reg_addr, len, data); } static int st_sensors_i2c_write_byte(struct st_sensor_transfer_buffer *tb, -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
