Re: [PATCH v2 1/5] iio: accel: bmc150: use regmap to retrieve struct device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/04/16 15:59, Srinivas Pandruvada wrote:
> On Sat, 2016-04-16 at 20:20 +0100, Jonathan Cameron wrote:
>> On 10/04/16 20:05, Alison Schofield wrote:
>>>
>>> Driver includes struct regmap and struct device in its global data.
>>> Remove the struct device and use regmap API to retrieve device
>>> info.
>>>
>>> Patch created using Coccinelle plus manual edits.
>>>
>>> Signed-off-by: Alison Schofield <amsfield22@xxxxxxxxx>
> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Applied to the togreg branch of iio.git

Thanks,

Jonathan
> 
>> I'm happy with this but please do make sure to cc the maintainer /
>> author
>> of drivers if possible (often the email addresses are out of date!)
>>
>> Srinivas, this is one of yours.  Are you happy with this?
>> I've also cc'd Irina who has worked on this driver recently for any
>> comments.
>>
>> If no one comments in the meantime I'll probably pick these up
>> sometime
>> in the next week.
>>
>> Jonathan
>>>
>>> ---
>>>  drivers/iio/accel/bmc150-accel-core.c | 99 +++++++++++++++++++--
>>> --------------
>>>  1 file changed, 54 insertions(+), 45 deletions(-)
>>>
>>> diff --git a/drivers/iio/accel/bmc150-accel-core.c
>>> b/drivers/iio/accel/bmc150-accel-core.c
>>> index f3d096f..ad5310b 100644
>>> --- a/drivers/iio/accel/bmc150-accel-core.c
>>> +++ b/drivers/iio/accel/bmc150-accel-core.c
>>> @@ -188,7 +188,6 @@ enum bmc150_accel_trigger_id {
>>>  
>>>  struct bmc150_accel_data {
>>>  	struct regmap *regmap;
>>> -	struct device *dev;
>>>  	int irq;
>>>  	struct bmc150_accel_interrupt
>>> interrupts[BMC150_ACCEL_INTERRUPTS];
>>>  	atomic_t active_intr;
>>> @@ -256,6 +255,7 @@ static int bmc150_accel_set_mode(struct
>>> bmc150_accel_data *data,
>>>  				 enum bmc150_power_modes mode,
>>>  				 int dur_us)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int i;
>>>  	int ret;
>>>  	u8 lpw_bits;
>>> @@ -279,11 +279,11 @@ static int bmc150_accel_set_mode(struct
>>> bmc150_accel_data *data,
>>>  	lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT;
>>>  	lpw_bits |= (dur_val <<
>>> BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT);
>>>  
>>> -	dev_dbg(data->dev, "Set Mode bits %x\n", lpw_bits);
>>> +	dev_dbg(dev, "Set Mode bits %x\n", lpw_bits);
>>>  
>>>  	ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_LPW,
>>> lpw_bits);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error writing reg_pmu_lpw\n");
>>> +		dev_err(dev, "Error writing reg_pmu_lpw\n");
>>>  		return ret;
>>>  	}
>>>  
>>> @@ -316,23 +316,24 @@ static int bmc150_accel_set_bw(struct
>>> bmc150_accel_data *data, int val,
>>>  
>>>  static int bmc150_accel_update_slope(struct bmc150_accel_data
>>> *data)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret;
>>>  
>>>  	ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_6,
>>>  					data->slope_thres);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error writing reg_int_6\n");
>>> +		dev_err(dev, "Error writing reg_int_6\n");
>>>  		return ret;
>>>  	}
>>>  
>>>  	ret = regmap_update_bits(data->regmap,
>>> BMC150_ACCEL_REG_INT_5,
>>>  				 BMC150_ACCEL_SLOPE_DUR_MASK,
>>> data->slope_dur);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error updating reg_int_5\n");
>>> +		dev_err(dev, "Error updating reg_int_5\n");
>>>  		return ret;
>>>  	}
>>>  
>>> -	dev_dbg(data->dev, "%s: %x %x\n", __func__, data-
>>>> slope_thres,
>>> +	dev_dbg(dev, "%s: %x %x\n", __func__, data->slope_thres,
>>>  		data->slope_dur);
>>>  
>>>  	return ret;
>>> @@ -378,20 +379,21 @@ static int
>>> bmc150_accel_get_startup_times(struct bmc150_accel_data *data)
>>>  
>>>  static int bmc150_accel_set_power_state(struct bmc150_accel_data
>>> *data, bool on)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret;
>>>  
>>>  	if (on) {
>>> -		ret = pm_runtime_get_sync(data->dev);
>>> +		ret = pm_runtime_get_sync(dev);
>>>  	} else {
>>> -		pm_runtime_mark_last_busy(data->dev);
>>> -		ret = pm_runtime_put_autosuspend(data->dev);
>>> +		pm_runtime_mark_last_busy(dev);
>>> +		ret = pm_runtime_put_autosuspend(dev);
>>>  	}
>>>  
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev,
>>> +		dev_err(dev,
>>>  			"Failed: bmc150_accel_set_power_state for
>>> %d\n", on);
>>>  		if (on)
>>> -			pm_runtime_put_noidle(data->dev);
>>> +			pm_runtime_put_noidle(dev);
>>>  
>>>  		return ret;
>>>  	}
>>> @@ -445,6 +447,7 @@ static void
>>> bmc150_accel_interrupts_setup(struct iio_dev *indio_dev,
>>>  static int bmc150_accel_set_interrupt(struct bmc150_accel_data
>>> *data, int i,
>>>  				      bool state)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	struct bmc150_accel_interrupt *intr = &data-
>>>> interrupts[i];
>>>  	const struct bmc150_accel_interrupt_info *info = intr-
>>>> info;
>>>  	int ret;
>>> @@ -474,7 +477,7 @@ static int bmc150_accel_set_interrupt(struct
>>> bmc150_accel_data *data, int i,
>>>  	ret = regmap_update_bits(data->regmap, info->map_reg,
>>> info->map_bitmask,
>>>  				 (state ? info->map_bitmask : 0));
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error updating
>>> reg_int_map\n");
>>> +		dev_err(dev, "Error updating reg_int_map\n");
>>>  		goto out_fix_power_state;
>>>  	}
>>>  
>>> @@ -482,7 +485,7 @@ static int bmc150_accel_set_interrupt(struct
>>> bmc150_accel_data *data, int i,
>>>  	ret = regmap_update_bits(data->regmap, info->en_reg, info-
>>>> en_bitmask,
>>>  				 (state ? info->en_bitmask : 0));
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error updating reg_int_en\n");
>>> +		dev_err(dev, "Error updating reg_int_en\n");
>>>  		goto out_fix_power_state;
>>>  	}
>>>  
>>> @@ -500,6 +503,7 @@ out_fix_power_state:
>>>  
>>>  static int bmc150_accel_set_scale(struct bmc150_accel_data *data,
>>> int val)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret, i;
>>>  
>>>  	for (i = 0; i < ARRAY_SIZE(data->chip_info->scale_table);
>>> ++i) {
>>> @@ -508,8 +512,7 @@ static int bmc150_accel_set_scale(struct
>>> bmc150_accel_data *data, int val)
>>>  				     BMC150_ACCEL_REG_PMU_RANGE,
>>>  				     data->chip_info-
>>>> scale_table[i].reg_range);
>>>  			if (ret < 0) {
>>> -				dev_err(data->dev,
>>> -					"Error writing
>>> pmu_range\n");
>>> +				dev_err(dev, "Error writing
>>> pmu_range\n");
>>>  				return ret;
>>>  			}
>>>  
>>> @@ -523,6 +526,7 @@ static int bmc150_accel_set_scale(struct
>>> bmc150_accel_data *data, int val)
>>>  
>>>  static int bmc150_accel_get_temp(struct bmc150_accel_data *data,
>>> int *val)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret;
>>>  	unsigned int value;
>>>  
>>> @@ -530,7 +534,7 @@ static int bmc150_accel_get_temp(struct
>>> bmc150_accel_data *data, int *val)
>>>  
>>>  	ret = regmap_read(data->regmap, BMC150_ACCEL_REG_TEMP,
>>> &value);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error reading reg_temp\n");
>>> +		dev_err(dev, "Error reading reg_temp\n");
>>>  		mutex_unlock(&data->mutex);
>>>  		return ret;
>>>  	}
>>> @@ -545,6 +549,7 @@ static int bmc150_accel_get_axis(struct
>>> bmc150_accel_data *data,
>>>  				 struct iio_chan_spec const *chan,
>>>  				 int *val)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret;
>>>  	int axis = chan->scan_index;
>>>  	unsigned int raw_val;
>>> @@ -559,7 +564,7 @@ static int bmc150_accel_get_axis(struct
>>> bmc150_accel_data *data,
>>>  	ret = regmap_bulk_read(data->regmap,
>>> BMC150_ACCEL_AXIS_TO_REG(axis),
>>>  			       &raw_val, 2);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error reading axis %d\n",
>>> axis);
>>> +		dev_err(dev, "Error reading axis %d\n", axis);
>>>  		bmc150_accel_set_power_state(data, false);
>>>  		mutex_unlock(&data->mutex);
>>>  		return ret;
>>> @@ -831,6 +836,7 @@ static int bmc150_accel_set_watermark(struct
>>> iio_dev *indio_dev, unsigned val)
>>>  static int bmc150_accel_fifo_transfer(struct bmc150_accel_data
>>> *data,
>>>  				      char *buffer, int samples)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int sample_length = 3 * 2;
>>>  	int ret;
>>>  	int total_length = samples * sample_length;
>>> @@ -854,7 +860,8 @@ static int bmc150_accel_fifo_transfer(struct
>>> bmc150_accel_data *data,
>>>  	}
>>>  
>>>  	if (ret)
>>> -		dev_err(data->dev, "Error transferring data from
>>> fifo in single steps of %zu\n",
>>> +		dev_err(dev,
>>> +			"Error transferring data from fifo in
>>> single steps of %zu\n",
>>>  			step);
>>>  
>>>  	return ret;
>>> @@ -864,6 +871,7 @@ static int __bmc150_accel_fifo_flush(struct
>>> iio_dev *indio_dev,
>>>  				     unsigned samples, bool irq)
>>>  {
>>>  	struct bmc150_accel_data *data = iio_priv(indio_dev);
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret, i;
>>>  	u8 count;
>>>  	u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
>>> @@ -873,7 +881,7 @@ static int __bmc150_accel_fifo_flush(struct
>>> iio_dev *indio_dev,
>>>  
>>>  	ret = regmap_read(data->regmap,
>>> BMC150_ACCEL_REG_FIFO_STATUS, &val);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error reading
>>> reg_fifo_status\n");
>>> +		dev_err(dev, "Error reading reg_fifo_status\n");
>>>  		return ret;
>>>  	}
>>>  
>>> @@ -1135,6 +1143,7 @@ static int bmc150_accel_trig_try_reen(struct
>>> iio_trigger *trig)
>>>  {
>>>  	struct bmc150_accel_trigger *t =
>>> iio_trigger_get_drvdata(trig);
>>>  	struct bmc150_accel_data *data = t->data;
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret;
>>>  
>>>  	/* new data interrupts don't need ack */
>>> @@ -1148,8 +1157,7 @@ static int bmc150_accel_trig_try_reen(struct
>>> iio_trigger *trig)
>>>  			   BMC150_ACCEL_INT_MODE_LATCH_RESET);
>>>  	mutex_unlock(&data->mutex);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev,
>>> -			"Error writing reg_int_rst_latch\n");
>>> +		dev_err(dev, "Error writing reg_int_rst_latch\n");
>>>  		return ret;
>>>  	}
>>>  
>>> @@ -1200,13 +1208,14 @@ static const struct iio_trigger_ops
>>> bmc150_accel_trigger_ops = {
>>>  static int bmc150_accel_handle_roc_event(struct iio_dev
>>> *indio_dev)
>>>  {
>>>  	struct bmc150_accel_data *data = iio_priv(indio_dev);
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int dir;
>>>  	int ret;
>>>  	unsigned int val;
>>>  
>>>  	ret = regmap_read(data->regmap,
>>> BMC150_ACCEL_REG_INT_STATUS_2, &val);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error reading
>>> reg_int_status_2\n");
>>> +		dev_err(dev, "Error reading reg_int_status_2\n");
>>>  		return ret;
>>>  	}
>>>  
>>> @@ -1249,6 +1258,7 @@ static irqreturn_t
>>> bmc150_accel_irq_thread_handler(int irq, void *private)
>>>  {
>>>  	struct iio_dev *indio_dev = private;
>>>  	struct bmc150_accel_data *data = iio_priv(indio_dev);
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	bool ack = false;
>>>  	int ret;
>>>  
>>> @@ -1272,7 +1282,7 @@ static irqreturn_t
>>> bmc150_accel_irq_thread_handler(int irq, void *private)
>>>  				   BMC150_ACCEL_INT_MODE_LATCH_INT
>>> |
>>>  				   BMC150_ACCEL_INT_MODE_LATCH_RES
>>> ET);
>>>  		if (ret)
>>> -			dev_err(data->dev, "Error writing
>>> reg_int_rst_latch\n");
>>> +			dev_err(dev, "Error writing
>>> reg_int_rst_latch\n");
>>>  
>>>  		ret = IRQ_HANDLED;
>>>  	} else {
>>> @@ -1343,13 +1353,14 @@ static void
>>> bmc150_accel_unregister_triggers(struct bmc150_accel_data *data,
>>>  static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev,
>>>  				       struct bmc150_accel_data
>>> *data)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int i, ret;
>>>  
>>>  	for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) {
>>>  		struct bmc150_accel_trigger *t = &data-
>>>> triggers[i];
>>>  
>>> -		t->indio_trig = devm_iio_trigger_alloc(data->dev,
>>> -					       bmc150_accel_trigge
>>> rs[i].name,
>>> +		t->indio_trig = devm_iio_trigger_alloc(dev,
>>> +					bmc150_accel_triggers[i].n
>>> ame,
>>>  						       indio_dev-
>>>> name,
>>>  						       indio_dev-
>>>> id);
>>>  		if (!t->indio_trig) {
>>> @@ -1357,7 +1368,7 @@ static int bmc150_accel_triggers_setup(struct
>>> iio_dev *indio_dev,
>>>  			break;
>>>  		}
>>>  
>>> -		t->indio_trig->dev.parent = data->dev;
>>> +		t->indio_trig->dev.parent = dev;
>>>  		t->indio_trig->ops = &bmc150_accel_trigger_ops;
>>>  		t->intr = bmc150_accel_triggers[i].intr;
>>>  		t->data = data;
>>> @@ -1381,12 +1392,13 @@ static int
>>> bmc150_accel_triggers_setup(struct iio_dev *indio_dev,
>>>  
>>>  static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data
>>> *data)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1;
>>>  	int ret;
>>>  
>>>  	ret = regmap_write(data->regmap, reg, data->fifo_mode);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Error writing
>>> reg_fifo_config1\n");
>>> +		dev_err(dev, "Error writing reg_fifo_config1\n");
>>>  		return ret;
>>>  	}
>>>  
>>> @@ -1396,7 +1408,7 @@ static int bmc150_accel_fifo_set_mode(struct
>>> bmc150_accel_data *data)
>>>  	ret = regmap_write(data->regmap,
>>> BMC150_ACCEL_REG_FIFO_CONFIG0,
>>>  			   data->watermark);
>>>  	if (ret < 0)
>>> -		dev_err(data->dev, "Error writing
>>> reg_fifo_config0\n");
>>> +		dev_err(dev, "Error writing reg_fifo_config0\n");
>>>  
>>>  	return ret;
>>>  }
>>> @@ -1480,17 +1492,17 @@ static const struct iio_buffer_setup_ops
>>> bmc150_accel_buffer_ops = {
>>>  
>>>  static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
>>>  {
>>> +	struct device *dev = regmap_get_device(data->regmap);
>>>  	int ret, i;
>>>  	unsigned int val;
>>>  
>>>  	ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID,
>>> &val);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev,
>>> -			"Error: Reading chip id\n");
>>> +		dev_err(dev, "Error: Reading chip id\n");
>>>  		return ret;
>>>  	}
>>>  
>>> -	dev_dbg(data->dev, "Chip Id %x\n", val);
>>> +	dev_dbg(dev, "Chip Id %x\n", val);
>>>  	for (i = 0; i < ARRAY_SIZE(bmc150_accel_chip_info_tbl);
>>> i++) {
>>>  		if (bmc150_accel_chip_info_tbl[i].chip_id == val)
>>> {
>>>  			data->chip_info =
>>> &bmc150_accel_chip_info_tbl[i];
>>> @@ -1499,7 +1511,7 @@ static int bmc150_accel_chip_init(struct
>>> bmc150_accel_data *data)
>>>  	}
>>>  
>>>  	if (!data->chip_info) {
>>> -		dev_err(data->dev, "Invalid chip %x\n", val);
>>> +		dev_err(dev, "Invalid chip %x\n", val);
>>>  		return -ENODEV;
>>>  	}
>>>  
>>> @@ -1516,8 +1528,7 @@ static int bmc150_accel_chip_init(struct
>>> bmc150_accel_data *data)
>>>  	ret = regmap_write(data->regmap,
>>> BMC150_ACCEL_REG_PMU_RANGE,
>>>  			   BMC150_ACCEL_DEF_RANGE_4G);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev,
>>> -					"Error writing
>>> reg_pmu_range\n");
>>> +		dev_err(dev, "Error writing reg_pmu_range\n");
>>>  		return ret;
>>>  	}
>>>  
>>> @@ -1535,8 +1546,7 @@ static int bmc150_accel_chip_init(struct
>>> bmc150_accel_data *data)
>>>  			   BMC150_ACCEL_INT_MODE_LATCH_INT |
>>>  			   BMC150_ACCEL_INT_MODE_LATCH_RESET);
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev,
>>> -			"Error writing reg_int_rst_latch\n");
>>> +		dev_err(dev, "Error writing reg_int_rst_latch\n");
>>>  		return ret;
>>>  	}
>>>  
>>> @@ -1556,7 +1566,6 @@ int bmc150_accel_core_probe(struct device
>>> *dev, struct regmap *regmap, int irq,
>>>  
>>>  	data = iio_priv(indio_dev);
>>>  	dev_set_drvdata(dev, indio_dev);
>>> -	data->dev = dev;
>>>  	data->irq = irq;
>>>  
>>>  	data->regmap = regmap;
>>> @@ -1580,13 +1589,13 @@ int bmc150_accel_core_probe(struct device
>>> *dev, struct regmap *regmap, int irq,
>>>  					 bmc150_accel_trigger_hand
>>> ler,
>>>  					 &bmc150_accel_buffer_ops)
>>> ;
>>>  	if (ret < 0) {
>>> -		dev_err(data->dev, "Failed: iio triggered buffer
>>> setup\n");
>>> +		dev_err(dev, "Failed: iio triggered buffer
>>> setup\n");
>>>  		return ret;
>>>  	}
>>>  
>>>  	if (data->irq > 0) {
>>>  		ret = devm_request_threaded_irq(
>>> -						data->dev, data-
>>>> irq,
>>> +						dev, data->irq,
>>>  						bmc150_accel_irq_h
>>> andler,
>>>  						bmc150_accel_irq_t
>>> hread_handler,
>>>  						IRQF_TRIGGER_RISIN
>>> G,
>>> @@ -1604,7 +1613,7 @@ int bmc150_accel_core_probe(struct device
>>> *dev, struct regmap *regmap, int irq,
>>>  		ret = regmap_write(data->regmap,
>>> BMC150_ACCEL_REG_INT_RST_LATCH,
>>>  				   BMC150_ACCEL_INT_MODE_LATCH_RES
>>> ET);
>>>  		if (ret < 0) {
>>> -			dev_err(data->dev, "Error writing
>>> reg_int_rst_latch\n");
>>> +			dev_err(dev, "Error writing
>>> reg_int_rst_latch\n");
>>>  			goto err_buffer_cleanup;
>>>  		}
>>>  
>>> @@ -1653,9 +1662,9 @@ int bmc150_accel_core_remove(struct device
>>> *dev)
>>>  
>>>  	iio_device_unregister(indio_dev);
>>>  
>>> -	pm_runtime_disable(data->dev);
>>> -	pm_runtime_set_suspended(data->dev);
>>> -	pm_runtime_put_noidle(data->dev);
>>> +	pm_runtime_disable(dev);
>>> +	pm_runtime_set_suspended(dev);
>>> +	pm_runtime_put_noidle(dev);
>>>  
>>>  	bmc150_accel_unregister_triggers(data,
>>> BMC150_ACCEL_TRIGGERS - 1);
>>>  
>>> @@ -1704,7 +1713,7 @@ static int
>>> bmc150_accel_runtime_suspend(struct device *dev)
>>>  	struct bmc150_accel_data *data = iio_priv(indio_dev);
>>>  	int ret;
>>>  
>>> -	dev_dbg(data->dev,  __func__);
>>> +	dev_dbg(dev,  __func__);
>>>  	ret = bmc150_accel_set_mode(data,
>>> BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
>>>  	if (ret < 0)
>>>  		return -EAGAIN;
>>> @@ -1719,7 +1728,7 @@ static int bmc150_accel_runtime_resume(struct
>>> device *dev)
>>>  	int ret;
>>>  	int sleep_val;
>>>  
>>> -	dev_dbg(data->dev,  __func__);
>>> +	dev_dbg(dev,  __func__);
>>>  
>>>  	ret = bmc150_accel_set_mode(data,
>>> BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
>>>  	if (ret < 0)
>>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux