Re: [PATCH v2 5/5] iio: gyro: bmg160: use regmap to retrieve struct device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2016-04-16 at 20:24 +0100, Jonathan Cameron wrote:
> On 10/04/16 20:08, Alison Schofield wrote:
> > 
> > Driver includes struct regmap and struct device in its global data.
> > Remove the struct device and use regmap API to retrieve device
> > info.
> > 
> > Patch created using Coccinelle plus manual edits.
> > 
> > Signed-off-by: Alison Schofield <amsfield22@xxxxxxxxx>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>

> Cc'd Srinivas
> 
> Actually I'm curious as to why linux-arm-kernel and linux-samsung-soc 
> are cc'd?
> Not terribly relevant lists...
> > 
> > ---
> >  drivers/iio/gyro/bmg160_core.c | 86 +++++++++++++++++++++---------
> > ------------
> >  1 file changed, 44 insertions(+), 42 deletions(-)
> > 
> > diff --git a/drivers/iio/gyro/bmg160_core.c
> > b/drivers/iio/gyro/bmg160_core.c
> > index 2493bb1..b2b1071 100644
> > --- a/drivers/iio/gyro/bmg160_core.c
> > +++ b/drivers/iio/gyro/bmg160_core.c
> > @@ -95,7 +95,6 @@
> >  #define BMG160_AUTO_SUSPEND_DELAY_MS	2000
> >  
> >  struct bmg160_data {
> > -	struct device *dev;
> >  	struct regmap *regmap;
> >  	struct iio_trigger *dready_trig;
> >  	struct iio_trigger *motion_trig;
> > @@ -137,11 +136,12 @@ static const struct {
> >  
> >  static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  
> >  	ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW,
> > mode);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error writing reg_pmu_lpw\n");
> > +		dev_err(dev, "Error writing reg_pmu_lpw\n");
> >  		return ret;
> >  	}
> >  
> > @@ -162,6 +162,7 @@ static int bmg160_convert_freq_to_bit(int val)
> >  
> >  static int bmg160_set_bw(struct bmg160_data *data, int val)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  	int bw_bits;
> >  
> > @@ -171,7 +172,7 @@ static int bmg160_set_bw(struct bmg160_data
> > *data, int val)
> >  
> >  	ret = regmap_write(data->regmap, BMG160_REG_PMU_BW,
> > bw_bits);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error writing reg_pmu_bw\n");
> > +		dev_err(dev, "Error writing reg_pmu_bw\n");
> >  		return ret;
> >  	}
> >  
> > @@ -182,18 +183,19 @@ static int bmg160_set_bw(struct bmg160_data
> > *data, int val)
> >  
> >  static int bmg160_chip_init(struct bmg160_data *data)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  	unsigned int val;
> >  
> >  	ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error reading reg_chip_id\n");
> > +		dev_err(dev, "Error reading reg_chip_id\n");
> >  		return ret;
> >  	}
> >  
> > -	dev_dbg(data->dev, "Chip Id %x\n", val);
> > +	dev_dbg(dev, "Chip Id %x\n", val);
> >  	if (val != BMG160_CHIP_ID_VAL) {
> > -		dev_err(data->dev, "invalid chip %x\n", val);
> > +		dev_err(dev, "invalid chip %x\n", val);
> >  		return -ENODEV;
> >  	}
> >  
> > @@ -212,14 +214,14 @@ static int bmg160_chip_init(struct
> > bmg160_data *data)
> >  	/* Set Default Range */
> >  	ret = regmap_write(data->regmap, BMG160_REG_RANGE,
> > BMG160_RANGE_500DPS);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error writing reg_range\n");
> > +		dev_err(dev, "Error writing reg_range\n");
> >  		return ret;
> >  	}
> >  	data->dps_range = BMG160_RANGE_500DPS;
> >  
> >  	ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES,
> > &val);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error reading
> > reg_slope_thres\n");
> > +		dev_err(dev, "Error reading reg_slope_thres\n");
> >  		return ret;
> >  	}
> >  	data->slope_thres = val;
> > @@ -228,7 +230,7 @@ static int bmg160_chip_init(struct bmg160_data
> > *data)
> >  	ret = regmap_update_bits(data->regmap,
> > BMG160_REG_INT_EN_1,
> >  				 BMG160_INT1_BIT_OD, 0);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error updating bits in
> > reg_int_en_1\n");
> > +		dev_err(dev, "Error updating bits in
> > reg_int_en_1\n");
> >  		return ret;
> >  	}
> >  
> > @@ -236,7 +238,7 @@ static int bmg160_chip_init(struct bmg160_data
> > *data)
> >  			   BMG160_INT_MODE_LATCH_INT |
> >  			   BMG160_INT_MODE_LATCH_RESET);
> >  	if (ret < 0) {
> > -		dev_err(data->dev,
> > +		dev_err(dev,
> >  			"Error writing reg_motion_intr\n");
> >  		return ret;
> >  	}
> > @@ -247,20 +249,21 @@ static int bmg160_chip_init(struct
> > bmg160_data *data)
> >  static int bmg160_set_power_state(struct bmg160_data *data, bool
> > on)
> >  {
> >  #ifdef CONFIG_PM
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  
> >  	if (on)
> > -		ret = pm_runtime_get_sync(data->dev);
> > +		ret = pm_runtime_get_sync(dev);
> >  	else {
> > -		pm_runtime_mark_last_busy(data->dev);
> > -		ret = pm_runtime_put_autosuspend(data->dev);
> > +		pm_runtime_mark_last_busy(dev);
> > +		ret = pm_runtime_put_autosuspend(dev);
> >  	}
> >  
> >  	if (ret < 0) {
> > -		dev_err(data->dev,
> > -			"Failed: bmg160_set_power_state for %d\n",
> > on);
> > +		dev_err(dev, "Failed: bmg160_set_power_state for
> > %d\n", on);
> > +
> >  		if (on)
> > -			pm_runtime_put_noidle(data->dev);
> > +			pm_runtime_put_noidle(dev);
> >  
> >  		return ret;
> >  	}
> > @@ -272,6 +275,7 @@ static int bmg160_set_power_state(struct
> > bmg160_data *data, bool on)
> >  static int bmg160_setup_any_motion_interrupt(struct bmg160_data
> > *data,
> >  					     bool status)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  
> >  	/* Enable/Disable INT_MAP0 mapping */
> > @@ -279,7 +283,7 @@ static int
> > bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> >  				 BMG160_INT_MAP_0_BIT_ANY,
> >  				 (status ?
> > BMG160_INT_MAP_0_BIT_ANY : 0));
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error updating bits
> > reg_int_map0\n");
> > +		dev_err(dev, "Error updating bits
> > reg_int_map0\n");
> >  		return ret;
> >  	}
> >  
> > @@ -289,8 +293,7 @@ static int
> > bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> >  		ret = regmap_write(data->regmap,
> > BMG160_REG_SLOPE_THRES,
> >  				   data->slope_thres);
> >  		if (ret < 0) {
> > -			dev_err(data->dev,
> > -				"Error writing
> > reg_slope_thres\n");
> > +			dev_err(dev, "Error writing
> > reg_slope_thres\n");
> >  			return ret;
> >  		}
> >  
> > @@ -298,8 +301,7 @@ static int
> > bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> >  				   BMG160_INT_MOTION_X |
> > BMG160_INT_MOTION_Y |
> >  				   BMG160_INT_MOTION_Z);
> >  		if (ret < 0) {
> > -			dev_err(data->dev,
> > -				"Error writing
> > reg_motion_intr\n");
> > +			dev_err(dev, "Error writing
> > reg_motion_intr\n");
> >  			return ret;
> >  		}
> >  
> > @@ -314,8 +316,7 @@ static int
> > bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> >  					   BMG160_INT_MODE_LATCH_I
> > NT |
> >  					   BMG160_INT_MODE_LATCH_R
> > ESET);
> >  			if (ret < 0) {
> > -				dev_err(data->dev,
> > -					"Error writing
> > reg_rst_latch\n");
> > +				dev_err(dev, "Error writing
> > reg_rst_latch\n");
> >  				return ret;
> >  			}
> >  		}
> > @@ -328,7 +329,7 @@ static int
> > bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> >  	}
> >  
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error writing reg_int_en0\n");
> > +		dev_err(dev, "Error writing reg_int_en0\n");
> >  		return ret;
> >  	}
> >  
> > @@ -338,6 +339,7 @@ static int
> > bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
> >  static int bmg160_setup_new_data_interrupt(struct bmg160_data
> > *data,
> >  					   bool status)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  
> >  	/* Enable/Disable INT_MAP1 mapping */
> > @@ -345,7 +347,7 @@ static int
> > bmg160_setup_new_data_interrupt(struct bmg160_data *data,
> >  				 BMG160_INT_MAP_1_BIT_NEW_DATA,
> >  				 (status ?
> > BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error updating bits in
> > reg_int_map1\n");
> > +		dev_err(dev, "Error updating bits in
> > reg_int_map1\n");
> >  		return ret;
> >  	}
> >  
> > @@ -354,9 +356,8 @@ static int
> > bmg160_setup_new_data_interrupt(struct bmg160_data *data,
> >  				   BMG160_INT_MODE_NON_LATCH_INT |
> >  				   BMG160_INT_MODE_LATCH_RESET);
> >  		if (ret < 0) {
> > -			dev_err(data->dev,
> > -				"Error writing reg_rst_latch\n");
> > -				return ret;
> > +			dev_err(dev, "Error writing
> > reg_rst_latch\n");
> > +			return ret;
> >  		}
> >  
> >  		ret = regmap_write(data->regmap,
> > BMG160_REG_INT_EN_0,
> > @@ -368,16 +369,15 @@ static int
> > bmg160_setup_new_data_interrupt(struct bmg160_data *data,
> >  				   BMG160_INT_MODE_LATCH_INT |
> >  				   BMG160_INT_MODE_LATCH_RESET);
> >  		if (ret < 0) {
> > -			dev_err(data->dev,
> > -				"Error writing reg_rst_latch\n");
> > -				return ret;
> > +			dev_err(dev, "Error writing
> > reg_rst_latch\n");
> > +			return ret;
> >  		}
> >  
> >  		ret = regmap_write(data->regmap,
> > BMG160_REG_INT_EN_0, 0);
> >  	}
> >  
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error writing reg_int_en0\n");
> > +		dev_err(dev, "Error writing reg_int_en0\n");
> >  		return ret;
> >  	}
> >  
> > @@ -400,6 +400,7 @@ static int bmg160_get_bw(struct bmg160_data
> > *data, int *val)
> >  
> >  static int bmg160_set_scale(struct bmg160_data *data, int val)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret, i;
> >  
> >  	for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
> > @@ -407,8 +408,7 @@ static int bmg160_set_scale(struct bmg160_data
> > *data, int val)
> >  			ret = regmap_write(data->regmap,
> > BMG160_REG_RANGE,
> >  					   bmg160_scale_table[i].d
> > ps_range);
> >  			if (ret < 0) {
> > -				dev_err(data->dev,
> > -					"Error writing
> > reg_range\n");
> > +				dev_err(dev, "Error writing
> > reg_range\n");
> >  				return ret;
> >  			}
> >  			data->dps_range =
> > bmg160_scale_table[i].dps_range;
> > @@ -421,6 +421,7 @@ static int bmg160_set_scale(struct bmg160_data
> > *data, int val)
> >  
> >  static int bmg160_get_temp(struct bmg160_data *data, int *val)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  	unsigned int raw_val;
> >  
> > @@ -433,7 +434,7 @@ static int bmg160_get_temp(struct bmg160_data
> > *data, int *val)
> >  
> >  	ret = regmap_read(data->regmap, BMG160_REG_TEMP,
> > &raw_val);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error reading reg_temp\n");
> > +		dev_err(dev, "Error reading reg_temp\n");
> >  		bmg160_set_power_state(data, false);
> >  		mutex_unlock(&data->mutex);
> >  		return ret;
> > @@ -450,6 +451,7 @@ static int bmg160_get_temp(struct bmg160_data
> > *data, int *val)
> >  
> >  static int bmg160_get_axis(struct bmg160_data *data, int axis, int
> > *val)
> >  {
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  	unsigned int raw_val;
> >  
> > @@ -463,7 +465,7 @@ static int bmg160_get_axis(struct bmg160_data
> > *data, int axis, int *val)
> >  	ret = regmap_bulk_read(data->regmap,
> > BMG160_AXIS_TO_REG(axis), &raw_val,
> >  			       2);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error reading axis %d\n",
> > axis);
> > +		dev_err(dev, "Error reading axis %d\n", axis);
> >  		bmg160_set_power_state(data, false);
> >  		mutex_unlock(&data->mutex);
> >  		return ret;
> > @@ -793,6 +795,7 @@ static int bmg160_trig_try_reen(struct
> > iio_trigger *trig)
> >  {
> >  	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> >  	struct bmg160_data *data = iio_priv(indio_dev);
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  
> >  	/* new data interrupts don't need ack */
> > @@ -804,7 +807,7 @@ static int bmg160_trig_try_reen(struct
> > iio_trigger *trig)
> >  			   BMG160_INT_MODE_LATCH_INT |
> >  			   BMG160_INT_MODE_LATCH_RESET);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error writing
> > reg_rst_latch\n");
> > +		dev_err(dev, "Error writing reg_rst_latch\n");
> >  		return ret;
> >  	}
> >  
> > @@ -864,13 +867,14 @@ static irqreturn_t bmg160_event_handler(int
> > irq, void *private)
> >  {
> >  	struct iio_dev *indio_dev = private;
> >  	struct bmg160_data *data = iio_priv(indio_dev);
> > +	struct device *dev = regmap_get_device(data->regmap);
> >  	int ret;
> >  	int dir;
> >  	unsigned int val;
> >  
> >  	ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2,
> > &val);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "Error reading
> > reg_int_status2\n");
> > +		dev_err(dev, "Error reading reg_int_status2\n");
> >  		goto ack_intr_status;
> >  	}
> >  
> > @@ -907,8 +911,7 @@ ack_intr_status:
> >  				   BMG160_INT_MODE_LATCH_INT |
> >  				   BMG160_INT_MODE_LATCH_RESET);
> >  		if (ret < 0)
> > -			dev_err(data->dev,
> > -				"Error writing reg_rst_latch\n");
> > +			dev_err(dev, "Error writing
> > reg_rst_latch\n");
> >  	}
> >  
> >  	return IRQ_HANDLED;
> > @@ -976,7 +979,6 @@ int bmg160_core_probe(struct device *dev,
> > struct regmap *regmap, int irq,
> >  
> >  	data = iio_priv(indio_dev);
> >  	dev_set_drvdata(dev, indio_dev);
> > -	data->dev = dev;
> >  	data->irq = irq;
> >  	data->regmap = regmap;
> >  
> > @@ -1139,7 +1141,7 @@ static int bmg160_runtime_suspend(struct
> > device *dev)
> >  
> >  	ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
> >  	if (ret < 0) {
> > -		dev_err(data->dev, "set mode failed\n");
> > +		dev_err(dev, "set mode failed\n");
> >  		return -EAGAIN;
> >  	}
> >  
> > 
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux