The following functionalities are supported: - write, read from volatile and non volatile memory - increase and decrease commands - read from status register - write and read to tcon register Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22059b.pdf Signed-off-by: Slawomir Stepien <sst@xxxxxxxxx> --- .../bindings/iio/potentiometer/mcp41xx.txt | 51 ++ Documentation/iio/mcp41xx.txt | 86 +++ drivers/iio/potentiometer/Kconfig | 18 + drivers/iio/potentiometer/Makefile | 1 + drivers/iio/potentiometer/mcp41xx.c | 709 +++++++++++++++++++++ 5 files changed, 865 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41xx.txt create mode 100644 Documentation/iio/mcp41xx.txt create mode 100644 drivers/iio/potentiometer/mcp41xx.c diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41xx.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41xx.txt new file mode 100644 index 0000000..6031142 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41xx.txt @@ -0,0 +1,51 @@ +* Microchip MCP414X/416X/424X/426X Digital Potentiometer driver + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp4113x-502" + "microchip,mcp4113x-103" + "microchip,mcp4113x-503" + "microchip,mcp4113x-104" + "microchip,mcp4114x-502" + "microchip,mcp4114x-103" + "microchip,mcp4114x-503" + "microchip,mcp4114x-104" + "microchip,mcp4115x-502" + "microchip,mcp4115x-103" + "microchip,mcp4115x-503" + "microchip,mcp4115x-104" + "microchip,mcp4116x-502" + "microchip,mcp4116x-103" + "microchip,mcp4116x-503" + "microchip,mcp4116x-104" + "microchip,mcp4123x-502" + "microchip,mcp4123x-103" + "microchip,mcp4123x-503" + "microchip,mcp4123x-104" + "microchip,mcp4124x-502" + "microchip,mcp4124x-103" + "microchip,mcp4124x-503" + "microchip,mcp4124x-104" + "microchip,mcp4125x-502" + "microchip,mcp4125x-103" + "microchip,mcp4125x-503" + "microchip,mcp4125x-104" + "microchip,mcp4126x-502" + "microchip,mcp4126x-103" + "microchip,mcp4126x-503" + "microchip,mcp4126x-104" + +Example: +mcp41xx: mcp41xx@0 { + compatible = "mcp416x-502"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/Documentation/iio/mcp41xx.txt b/Documentation/iio/mcp41xx.txt new file mode 100644 index 0000000..57dc889 --- /dev/null +++ b/Documentation/iio/mcp41xx.txt @@ -0,0 +1,86 @@ +Industrial I/O driver for MCP414X/416X/424X/426X Digital POTs +------------------------------------------------------------- + +Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22059a.pdf + +sysfs interface +--------------- +N is the wiper number (0 = first wiper, 1 = second wiper) + +File: /sys/bus/iio/devices/../decr_wiperN +Mode: Write +Description: + Write anything to this file to decrease wiper N position by one step. +Example: + echo > decr_wiper0 + + +File: /sys/bus/iio/devices/../incr_wiperN +Mode: Write +Description: + Write anything to this file to increase wiper N position by one step. +Example: + echo > incr_wiper0 + + +File: /sys/bus/iio/devices/../memory_map +Mode: Read/Write +Description: + Read the whole memory or write value to given memory address. + Read outputs two columns. First column is address and second column is + value at that address. + For write use hex values with leading 0x. First hex is address second + hex is the value. +Example: + cat memory_map + echo "0x00 0x80" > memory_map + + +File: /sys/bus/iio/devices/../nv_wiperN +Mode: Read/Write +Description: + Read or write to non volatile memory of wiper N. + Read outputs decimal value that corresponds to wiper position. + For write use decimal value that corresponds to wiper position. +Example: + cat nv_wiper0 + echo "128" > nv_wiper0 + + +File: /sys/bus/iio/devices/../out_resistance_scale +Mode: Read +Description: + Read the resistance scale of one step (in ohms). +Example: + cat out_resistance_scale + + +File: /sys/bus/iio/devices/../out_resistanceN_raw +Mode: Read/Write +Description: + Read or write to volatile memory of wiper N. + Read outputs decimal value that corresponds to wiper position. + For write use decimal value that corresponds to wiper position. +Example: + cat out_resistance0_raw + echo "128" > out_resistance0_raw + + +File: /sys/bus/iio/devices/../status_register +Mode: Read +Description: + Read status register. + Read outputs content in binary format. +Example: + cat status_register + + +File: /sys/bus/iio/devices/../tcon_register +Mode: ead/Write +Description: + Read or write to tcon register. + Read outputs content in binary format. + For write use binary format string. +Example: + cat tcon_register + echo "111111100" > tcon_register diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig index fd75db7..4540367 100644 --- a/drivers/iio/potentiometer/Kconfig +++ b/drivers/iio/potentiometer/Kconfig @@ -5,6 +5,24 @@ menu "Digital potentiometers" +config MCP41XX + tristate "Microchip MCP414X/416X/424X/426X Digital Potentiometer driver" + depends on SPI + help + Say yes here to build support for the Microchip + MCP4131, MCP4132, + MCP4141, MCP4142, + MCP4151, MCP4152, + MCP4161, MCP4162, + MCP4231, MCP4232, + MCP4241, MCP4242, + MCP4251, MCP4252, + MCP4261, MCP4262, + digital potentiomenter chips. + + To compile this driver as a module, choose M here: the + module will be called mcp41xx. + config MCP4531 tristate "Microchip MCP45xx/MCP46xx Digital Potentiometer driver" depends on I2C diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile index 8afe492..1266ebf 100644 --- a/drivers/iio/potentiometer/Makefile +++ b/drivers/iio/potentiometer/Makefile @@ -3,4 +3,5 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_MCP41XX) += mcp41xx.o obj-$(CONFIG_MCP4531) += mcp4531.o diff --git a/drivers/iio/potentiometer/mcp41xx.c b/drivers/iio/potentiometer/mcp41xx.c new file mode 100644 index 0000000..654965b --- /dev/null +++ b/drivers/iio/potentiometer/mcp41xx.c @@ -0,0 +1,709 @@ +/* + * Industrial I/O driver for MCP414X/416X/424X/426X Digital POTs + * + * Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22059a.pdf + * + * Copyright (c) 2016 Slawomir Stepien + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/err.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define MCP41XX_WRITE (0x00 << 2) +#define MCP41XX_INCR (0x01 << 2) +#define MCP41XX_DECR (0x02 << 2) +#define MCP41XX_READ (0x03 << 2) + +#define MCP41XX_FULL_SCALE(t) (t[0] == 0xFF ? 256 : t[1]) +#define MCP41XX_9BIT_VALUE(t) ((t[1] + (t[0] << 8)) & 0x1FF) + +#define MCP41XX_MIN_ADDR 0x00 +#define MCP41XX_MAX_ADDR 0x0F + +#define MCP41XX_NV_OFFSET 0x02 + +#define MCP41XX_TCON_ADDR 0x04 +#define MCP41XX_STATUS_ADDR 0x05 + +struct mcp41xx_cfg { + unsigned long int devid; + unsigned int wipers; + unsigned int num_pos; + unsigned int kohms; +}; + +enum mcp41xx_type { + MCP413x_502, + MCP413x_103, + MCP413x_503, + MCP413x_104, + MCP414x_502, + MCP414x_103, + MCP414x_503, + MCP414x_104, + MCP415x_502, + MCP415x_103, + MCP415x_503, + MCP415x_104, + MCP416x_502, + MCP416x_103, + MCP416x_503, + MCP416x_104, + MCP423x_502, + MCP423x_103, + MCP423x_503, + MCP423x_104, + MCP424x_502, + MCP424x_103, + MCP424x_503, + MCP424x_104, + MCP425x_502, + MCP425x_103, + MCP425x_503, + MCP425x_104, + MCP426x_502, + MCP426x_103, + MCP426x_503, + MCP426x_104, +}; + +static const struct mcp41xx_cfg mcp41xx_cfg[] = { + [MCP413x_502] = { .wipers = 1, .num_pos = 129, .kohms = 5 }, + [MCP413x_103] = { .wipers = 1, .num_pos = 129, .kohms = 10 }, + [MCP413x_503] = { .wipers = 1, .num_pos = 129, .kohms = 50 }, + [MCP413x_104] = { .wipers = 1, .num_pos = 129, .kohms = 100 }, + [MCP414x_502] = { .wipers = 1, .num_pos = 129, .kohms = 5 }, + [MCP414x_103] = { .wipers = 1, .num_pos = 129, .kohms = 10 }, + [MCP414x_503] = { .wipers = 1, .num_pos = 129, .kohms = 50 }, + [MCP414x_104] = { .wipers = 1, .num_pos = 129, .kohms = 100 }, + [MCP415x_502] = { .wipers = 1, .num_pos = 257, .kohms = 5 }, + [MCP415x_103] = { .wipers = 1, .num_pos = 257, .kohms = 10 }, + [MCP415x_503] = { .wipers = 1, .num_pos = 257, .kohms = 50 }, + [MCP415x_104] = { .wipers = 1, .num_pos = 257, .kohms = 100 }, + [MCP416x_502] = { .wipers = 1, .num_pos = 257, .kohms = 5 }, + [MCP416x_103] = { .wipers = 1, .num_pos = 257, .kohms = 10 }, + [MCP416x_503] = { .wipers = 1, .num_pos = 257, .kohms = 50 }, + [MCP416x_104] = { .wipers = 1, .num_pos = 257, .kohms = 100 }, + [MCP423x_502] = { .wipers = 2, .num_pos = 129, .kohms = 5 }, + [MCP423x_103] = { .wipers = 2, .num_pos = 129, .kohms = 10 }, + [MCP423x_503] = { .wipers = 2, .num_pos = 129, .kohms = 50 }, + [MCP423x_104] = { .wipers = 2, .num_pos = 129, .kohms = 100 }, + [MCP424x_502] = { .wipers = 2, .num_pos = 129, .kohms = 5 }, + [MCP424x_103] = { .wipers = 2, .num_pos = 129, .kohms = 10 }, + [MCP424x_503] = { .wipers = 2, .num_pos = 129, .kohms = 50 }, + [MCP424x_104] = { .wipers = 2, .num_pos = 129, .kohms = 100 }, + [MCP425x_502] = { .wipers = 2, .num_pos = 257, .kohms = 5 }, + [MCP425x_103] = { .wipers = 2, .num_pos = 257, .kohms = 10 }, + [MCP425x_503] = { .wipers = 2, .num_pos = 257, .kohms = 50 }, + [MCP425x_104] = { .wipers = 2, .num_pos = 257, .kohms = 100 }, + [MCP426x_502] = { .wipers = 2, .num_pos = 257, .kohms = 5 }, + [MCP426x_103] = { .wipers = 2, .num_pos = 257, .kohms = 10 }, + [MCP426x_503] = { .wipers = 2, .num_pos = 257, .kohms = 50 }, + [MCP426x_104] = { .wipers = 2, .num_pos = 257, .kohms = 100 }, +}; + +struct mcp41xx_data { + struct spi_device *spi; + struct mutex lock; + unsigned long devid; + u8 tx[2], rx[2]; + struct spi_transfer xfer; + struct spi_message msg; +}; + +#define MCP41XX_CHANNEL(ch) { \ + .type = IIO_RESISTANCE, \ + .output = 1, \ + .indexed = 1, \ + .channel = (ch), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec mcp41xx_channels[] = { + MCP41XX_CHANNEL(0), + MCP41XX_CHANNEL(1), +}; + +/* Function based on: arch/parisc/kernel/traps.c */ +static int printbinary(char *buf, unsigned long x, int nbits) +{ + unsigned long mask = 1UL << (nbits - 2); + + while (mask != 0) { + *buf++ = (mask & x ? '1' : '0'); + mask >>= 1; + } + *buf++ = '\n'; + *buf = '\0'; + + return nbits; +} + +static int mcp41xx_exec(struct mcp41xx_data *data, + u8 addr, u8 cmd, + int *trans, size_t n) +{ + int err; + struct spi_device *spi = data->spi; + + /* Two bytes are needed for the response */ + if (n != 2) + return -EINVAL; + + switch (cmd) { + case MCP41XX_READ: + data->xfer.len = 2; /* Two bytes transfer for this command */ + data->tx[0] = (addr << 4) | MCP41XX_READ; + data->tx[1] = 0; + break; + + case MCP41XX_WRITE: + data->xfer.len = 2; + /* Shift trans[0] to see if this is full scale value write */ + data->tx[0] = (addr << 4) | MCP41XX_WRITE | (trans[0] >> 8); + data->tx[1] = (trans[0]) & 0xFF; /* 8 bits here */ + break; + + case MCP41XX_INCR: + data->xfer.len = 1; /* One byte transfer for this command */ + data->tx[0] = (addr << 4) | MCP41XX_INCR; + break; + + case MCP41XX_DECR: + data->xfer.len = 1; + data->tx[0] = (addr << 4) | MCP41XX_DECR; + break; + + default: + return -EINVAL; + } + + dev_dbg(&spi->dev, "mcp41xx_exec: tx0: 0x%x tx1: 0x%x\n", + data->tx[0], data->tx[1]); + + mutex_lock(&data->lock); + spi_message_init(&data->msg); + spi_message_add_tail(&data->xfer, &data->msg); + + err = spi_sync(spi, &data->msg); + if (err) { + dev_err(&spi->dev, "spi_sync(): %d\n", err); + mutex_unlock(&data->lock); + return err; + } + mutex_unlock(&data->lock); + + dev_dbg(&spi->dev, "mcp41xx_exec: rx0: 0x%x rx1: 0x%x\n", + data->rx[0], data->rx[1]); + + /* Copy back the response */ + trans[0] = data->rx[0]; + trans[1] = data->rx[1]; + + return 0; +} + +static ssize_t mcp41xx_show_memory_map(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + ssize_t i = 0; + int err; + int addr; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + + /* Read the whole memory */ + for (addr = MCP41XX_MIN_ADDR; addr <= MCP41XX_MAX_ADDR; addr++) { + err = mcp41xx_exec(data, + addr, MCP41XX_READ, + trans, ARRAY_SIZE(trans)); + if (err) + return i; + + /* First column is address, second is value */ + i += scnprintf(&buf[i], + 12, "0x%02x 0x%03x\n", + addr, MCP41XX_9BIT_VALUE(trans)); + } + + return i; +} + +static ssize_t mcp41xx_store_memory_map(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + int err; + int addr; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + + err = sscanf(buf, "0x%x 0x%x\n", &addr, &trans[0]); + if (err != 2) + return err; + + err = mcp41xx_exec(data, addr, MCP41XX_WRITE, trans, ARRAY_SIZE(trans)); + if (err) + return err; + + return len; +} + +static IIO_DEVICE_ATTR(memory_map, S_IRUGO | S_IWUSR, + mcp41xx_show_memory_map, + mcp41xx_store_memory_map, + 0); + +static ssize_t mcp41xx_show_nv_wiper(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int err; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + err = mcp41xx_exec(data, + this_attr->address + MCP41XX_NV_OFFSET, MCP41XX_READ, + trans, ARRAY_SIZE(trans)); + if (err) + return -EINVAL; + + return sprintf(buf, "%d\n", MCP41XX_FULL_SCALE(trans)); +} + +static ssize_t mcp41xx_store_nv_wiper(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + int err; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + err = kstrtoint(buf, 10, &trans[0]); + if (err) + return -EINVAL; + + err = mcp41xx_exec(data, + this_attr->address + MCP41XX_NV_OFFSET, MCP41XX_WRITE, + trans, ARRAY_SIZE(trans)); + if (err) + return -EINVAL; + + return len; +} + +#define MCP41XX_NV_WIPER(n) IIO_DEVICE_ATTR(nv_wiper##n, S_IRUGO | S_IWUSR, \ + mcp41xx_show_nv_wiper, mcp41xx_store_nv_wiper, n) + +MCP41XX_NV_WIPER(0); +MCP41XX_NV_WIPER(1); + +static ssize_t mcp41xx_store_incr_wiper(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + int err; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + err = mcp41xx_exec(data, + this_attr->address, MCP41XX_INCR, + trans, ARRAY_SIZE(trans)); + if (err) + return -EINVAL; + + return len; +} + +static ssize_t mcp41xx_store_decr_wiper(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + int err; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + err = mcp41xx_exec(data, + this_attr->address, MCP41XX_DECR, + trans, ARRAY_SIZE(trans)); + if (err) + return -EINVAL; + + return len; +} + +#define MCP41XX_INCR_ATTR(n) IIO_DEVICE_ATTR(incr_wiper##n, S_IWUSR, \ + NULL, mcp41xx_store_incr_wiper, n) + +MCP41XX_INCR_ATTR(0); +MCP41XX_INCR_ATTR(1); + +#define MCP41XX_DECR_ATTR(n) IIO_DEVICE_ATTR(decr_wiper##n, S_IWUSR, \ + NULL, mcp41xx_store_decr_wiper, n) + +MCP41XX_DECR_ATTR(0); +MCP41XX_DECR_ATTR(1); + +static ssize_t mcp41xx_show_status_register(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int err; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + unsigned long val; + + err = mcp41xx_exec(data, + MCP41XX_STATUS_ADDR, MCP41XX_READ, + trans, ARRAY_SIZE(trans)); + if (err) + return -EINVAL; + + val = MCP41XX_9BIT_VALUE(trans); + return printbinary(buf, val, 10); /* One extra for new line */ +} + +static IIO_DEVICE_ATTR(status_register, S_IRUGO, + mcp41xx_show_status_register, + NULL, + 0); + +static ssize_t mcp41xx_show_tcon_register(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int err; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + unsigned long val; + + err = mcp41xx_exec(data, + MCP41XX_TCON_ADDR, MCP41XX_READ, + trans, ARRAY_SIZE(trans)); + if (err) + return -EINVAL; + + val = MCP41XX_9BIT_VALUE(trans); + return printbinary(buf, val, 10); /* One extra for new line */ +} + +static ssize_t mcp41xx_store_tcon_register(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + int err; + int trans[2]; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mcp41xx_data *data = iio_priv(indio_dev); + + err = kstrtoint(buf, 2, &trans[0]); + if (err) + return -EINVAL; + + err = mcp41xx_exec(data, + MCP41XX_TCON_ADDR, MCP41XX_WRITE, + trans, ARRAY_SIZE(trans)); + if (err) + return -EINVAL; + + return len; +} + +static IIO_DEVICE_ATTR(tcon_register, S_IRUGO | S_IWUSR, + mcp41xx_show_tcon_register, + mcp41xx_store_tcon_register, + 0); + +/* All available attributes that can be created */ +static struct iio_dev_attr *mcp41xx_all_attrs[] = { + &iio_dev_attr_memory_map, + &iio_dev_attr_nv_wiper0, + &iio_dev_attr_nv_wiper1, + &iio_dev_attr_incr_wiper0, + &iio_dev_attr_incr_wiper1, + &iio_dev_attr_decr_wiper0, + &iio_dev_attr_decr_wiper1, + &iio_dev_attr_status_register, + &iio_dev_attr_tcon_register, +}; + +/* This will be filled dynamically in probe() */ +static struct attribute **mcp41xx_attributes; +static struct attribute_group mcp41xx_attribute_group; + +static int mcp41xx_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int err; + int trans[2]; + struct mcp41xx_data *data = iio_priv(indio_dev); + int address = chan->channel; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = mcp41xx_exec(data, + address, MCP41XX_READ, + trans, ARRAY_SIZE(trans)); + if (err) + return err; + + *val = MCP41XX_FULL_SCALE(trans); + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 1000 * mcp41xx_cfg[data->devid].kohms; + *val2 = mcp41xx_cfg[data->devid].num_pos; + + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int mcp41xx_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int trans[2]; + struct mcp41xx_data *data = iio_priv(indio_dev); + int address = chan->channel; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + trans[0] = val; + + return mcp41xx_exec(data, + address, MCP41XX_WRITE, + trans, ARRAY_SIZE(trans)); + } + + return -EINVAL; +} + +static const struct iio_info mcp41xx_info = { + .attrs = &mcp41xx_attribute_group, + .read_raw = mcp41xx_read_raw, + .write_raw = mcp41xx_write_raw, + .driver_module = THIS_MODULE, +}; + +static int mcp41xx_probe(struct spi_device *spi) +{ + int l, i, addr; + int err; + size_t attrs_count; + struct iio_dev *indio_dev; + struct mcp41xx_data *data; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->spi = spi; + data->devid = spi_get_device_id(spi)->driver_data; + spi_set_drvdata(spi, indio_dev); + + data->xfer.tx_buf = data->tx; + data->xfer.rx_buf = data->rx; + + mutex_init(&data->lock); + + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &mcp41xx_info; + indio_dev->channels = mcp41xx_channels; + indio_dev->num_channels = mcp41xx_cfg[data->devid].wipers; + indio_dev->name = spi_get_device_id(spi)->name; + + /* Dynamic attributes */ + attrs_count = ARRAY_SIZE(mcp41xx_all_attrs); + mcp41xx_attributes = kzalloc( + sizeof(struct attribute *) * (attrs_count + 1), + GFP_KERNEL); + if (mcp41xx_attributes == NULL) + return -ENOMEM; + + i = 0; + for (l = 0; l < attrs_count; l++) { + /* Attrs with address == 0 or address == wipers are added */ + addr = mcp41xx_all_attrs[l]->address; + if (addr == 0 || addr == indio_dev->num_channels - 1) { + mcp41xx_attributes[i] = + &mcp41xx_all_attrs[l]->dev_attr.attr; + i++; + } + } + mcp41xx_attribute_group.attrs = mcp41xx_attributes; + + err = devm_iio_device_register(&spi->dev, indio_dev); + if (err) { + dev_info(&spi->dev, "Unable to register %s", indio_dev->name); + return err; + } + + dev_info(&spi->dev, "Registered %s", indio_dev->name); + + return 0; +} + +static int mcp41xx_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct mcp41xx_data *data = iio_priv(indio_dev); + + mutex_destroy(&data->lock); + devm_iio_device_unregister(&spi->dev, indio_dev); + kfree(mcp41xx_attributes); + + dev_info(&spi->dev, "Unregistered %s", indio_dev->name); + + return 0; +} + +#if defined CONFIG_OF +static const struct of_device_id mcp41xx_dt_ids[] = { + { .compatible = "microchip,mcp4113x-502", + .data = &mcp41xx_cfg[MCP413x_502] }, + { .compatible = "microchip,mcp4113x-103", + .data = &mcp41xx_cfg[MCP413x_103] }, + { .compatible = "microchip,mcp4113x-503", + .data = &mcp41xx_cfg[MCP413x_503] }, + { .compatible = "microchip,mcp4113x-104", + .data = &mcp41xx_cfg[MCP413x_104] }, + { .compatible = "microchip,mcp4114x-502", + .data = &mcp41xx_cfg[MCP414x_502] }, + { .compatible = "microchip,mcp4114x-103", + .data = &mcp41xx_cfg[MCP414x_103] }, + { .compatible = "microchip,mcp4114x-503", + .data = &mcp41xx_cfg[MCP414x_503] }, + { .compatible = "microchip,mcp4114x-104", + .data = &mcp41xx_cfg[MCP414x_104] }, + { .compatible = "microchip,mcp4115x-502", + .data = &mcp41xx_cfg[MCP415x_502] }, + { .compatible = "microchip,mcp4115x-103", + .data = &mcp41xx_cfg[MCP415x_103] }, + { .compatible = "microchip,mcp4115x-503", + .data = &mcp41xx_cfg[MCP415x_503] }, + { .compatible = "microchip,mcp4115x-104", + .data = &mcp41xx_cfg[MCP415x_104] }, + { .compatible = "microchip,mcp4116x-502", + .data = &mcp41xx_cfg[MCP416x_502] }, + { .compatible = "microchip,mcp4116x-103", + .data = &mcp41xx_cfg[MCP416x_103] }, + { .compatible = "microchip,mcp4116x-503", + .data = &mcp41xx_cfg[MCP416x_503] }, + { .compatible = "microchip,mcp4116x-104", + .data = &mcp41xx_cfg[MCP416x_104] }, + { .compatible = "microchip,mcp4123x-502", + .data = &mcp41xx_cfg[MCP423x_502] }, + { .compatible = "microchip,mcp4123x-103", + .data = &mcp41xx_cfg[MCP423x_103] }, + { .compatible = "microchip,mcp4123x-503", + .data = &mcp41xx_cfg[MCP423x_503] }, + { .compatible = "microchip,mcp4123x-104", + .data = &mcp41xx_cfg[MCP423x_104] }, + { .compatible = "microchip,mcp4124x-502", + .data = &mcp41xx_cfg[MCP424x_502] }, + { .compatible = "microchip,mcp4124x-103", + .data = &mcp41xx_cfg[MCP424x_103] }, + { .compatible = "microchip,mcp4124x-503", + .data = &mcp41xx_cfg[MCP424x_503] }, + { .compatible = "microchip,mcp4124x-104", + .data = &mcp41xx_cfg[MCP424x_104] }, + { .compatible = "microchip,mcp4125x-502", + .data = &mcp41xx_cfg[MCP425x_502] }, + { .compatible = "microchip,mcp4125x-103", + .data = &mcp41xx_cfg[MCP425x_103] }, + { .compatible = "microchip,mcp4125x-503", + .data = &mcp41xx_cfg[MCP425x_503] }, + { .compatible = "microchip,mcp4125x-104", + .data = &mcp41xx_cfg[MCP425x_104] }, + { .compatible = "microchip,mcp4126x-502", + .data = &mcp41xx_cfg[MCP426x_502] }, + { .compatible = "microchip,mcp4126x-103", + .data = &mcp41xx_cfg[MCP426x_103] }, + { .compatible = "microchip,mcp4126x-503", + .data = &mcp41xx_cfg[MCP426x_503] }, + { .compatible = "microchip,mcp4126x-104", + .data = &mcp41xx_cfg[MCP426x_104] }, + {} +}; +MODULE_DEVICE_TABLE(of, mcp41xx_dt_ids); +#endif + +static const struct spi_device_id mcp41xx_id[] = { + { "mcp413x-502", MCP413x_502 }, + { "mcp413x-103", MCP413x_103 }, + { "mcp413x-503", MCP413x_503 }, + { "mcp413x-104", MCP413x_104 }, + { "mcp414x-502", MCP414x_502 }, + { "mcp414x-103", MCP414x_103 }, + { "mcp414x-503", MCP414x_503 }, + { "mcp414x-104", MCP414x_104 }, + { "mcp415x-502", MCP415x_502 }, + { "mcp415x-103", MCP415x_103 }, + { "mcp415x-503", MCP415x_503 }, + { "mcp415x-104", MCP415x_104 }, + { "mcp416x-502", MCP416x_502 }, + { "mcp416x-103", MCP416x_103 }, + { "mcp416x-503", MCP416x_503 }, + { "mcp416x-104", MCP416x_104 }, + { "mcp423x-502", MCP423x_502 }, + { "mcp423x-103", MCP423x_103 }, + { "mcp423x-503", MCP423x_503 }, + { "mcp423x-104", MCP423x_104 }, + { "mcp424x-502", MCP424x_502 }, + { "mcp424x-103", MCP424x_103 }, + { "mcp424x-503", MCP424x_503 }, + { "mcp424x-104", MCP424x_104 }, + { "mcp425x-502", MCP425x_502 }, + { "mcp425x-103", MCP425x_103 }, + { "mcp425x-503", MCP425x_503 }, + { "mcp425x-104", MCP425x_104 }, + { "mcp426x-502", MCP426x_502 }, + { "mcp426x-103", MCP426x_103 }, + { "mcp426x-503", MCP426x_503 }, + { "mcp426x-104", MCP426x_104 }, + {} +}; +MODULE_DEVICE_TABLE(spi, mcp41xx_id); + +static struct spi_driver mcp41xx_driver = { + .driver = { + .name = "mcp41xx", + .of_match_table = of_match_ptr(mcp41xx_dt_ids), + }, + .probe = mcp41xx_probe, + .remove = mcp41xx_remove, + .id_table = mcp41xx_id, +}; + +module_spi_driver(mcp41xx_driver); + +MODULE_AUTHOR("Slawomir Stepien <sst@xxxxxxxxx>"); +MODULE_DESCRIPTION("MCP41XX digital potentiometer"); +MODULE_LICENSE("GPL v2"); -- 2.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
