Previously most drivers that used a i2c_check_functionality() check
condition required various error codes on failure. This patchset
converts to a standard of -EOPNOTSUPP
Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
---
drivers/iio/adc/mcp3422.c | 2 +-
drivers/iio/adc/ti-adc081c.c | 2 +-
drivers/iio/chemical/vz89x.c | 2 +-
drivers/iio/humidity/hdc100x.c | 2 +-
drivers/iio/humidity/htu21.c | 2 +-
drivers/iio/humidity/si7005.c | 2 +-
drivers/iio/humidity/si7020.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +-
drivers/iio/light/bh1750.c | 2 +-
drivers/iio/light/jsa1212.c | 2 +-
drivers/iio/potentiometer/mcp4531.c | 2 +-
drivers/iio/pressure/mpl115_i2c.c | 2 +-
drivers/iio/pressure/ms5611_i2c.c | 2 +-
drivers/iio/pressure/ms5637.c | 2 +-
drivers/iio/pressure/t5403.c | 2 +-
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 2 +-
drivers/iio/temperature/mlx90614.c | 2 +-
drivers/iio/temperature/tmp006.c | 2 +-
drivers/iio/temperature/tsys01.c | 2 +-
drivers/iio/temperature/tsys02d.c | 2 +-
20 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index ebad83e..d7b36ef 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -339,7 +339,7 @@ static int mcp3422_probe(struct i2c_client *client,
u8 config;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc));
if (!indio_dev)
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
index 2c8374f..ecbc121 100644
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -73,7 +73,7 @@ static int adc081c_probe(struct i2c_client *client,
int err;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
+ return -EOPNOTSUPP;
iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
if (!iio)
diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c
index b8b8049..652649d 100644
--- a/drivers/iio/chemical/vz89x.c
+++ b/drivers/iio/chemical/vz89x.c
@@ -249,7 +249,7 @@ static int vz89x_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
data->xfer = vz89x_smbus_xfer;
else
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
i2c_set_clientdata(client, indio_dev);
data->client = client;
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index a7f61e88..fa47676 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -274,7 +274,7 @@ static int hdc100x_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
diff --git a/drivers/iio/humidity/htu21.c b/drivers/iio/humidity/htu21.c
index d1636a7..11cbc38 100644
--- a/drivers/iio/humidity/htu21.c
+++ b/drivers/iio/humidity/htu21.c
@@ -192,7 +192,7 @@ static int htu21_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
dev_err(&client->dev,
"Adapter does not support some i2c transaction\n");
- return -ENODEV;
+ return -EOPNOTSUPP;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c
index 98a022f..6297766 100644
--- a/drivers/iio/humidity/si7005.c
+++ b/drivers/iio/humidity/si7005.c
@@ -135,7 +135,7 @@ static int si7005_probe(struct i2c_client *client,
int ret;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index 5ab4e06..ffc2ccf 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -121,7 +121,7 @@ static int si7020_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WRITE_BYTE |
I2C_FUNC_SMBUS_READ_WORD_DATA))
- return -ENODEV;
+ return -EOPNOTSUPP;
/* Reset device, loads default settings. */
ret = i2c_smbus_write_byte(client, SI7020CMD_RESET);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index af400dd..d2eddfd 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -120,7 +120,7 @@ static int inv_mpu_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_I2C_BLOCK))
- return -ENOSYS;
+ return -EOPNOTSUPP;
regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
if (IS_ERR(regmap)) {
diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
index 8b41643..b059466 100644
--- a/drivers/iio/light/bh1750.c
+++ b/drivers/iio/light/bh1750.c
@@ -241,7 +241,7 @@ static int bh1750_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
I2C_FUNC_SMBUS_WRITE_BYTE))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
index c4e8c6b..99a6281 100644
--- a/drivers/iio/light/jsa1212.c
+++ b/drivers/iio/light/jsa1212.c
@@ -326,7 +326,7 @@ static int jsa1212_probe(struct i2c_client *client,
int ret;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c
index a3f6687..0db67fe 100644
--- a/drivers/iio/potentiometer/mcp4531.c
+++ b/drivers/iio/potentiometer/mcp4531.c
@@ -159,7 +159,7 @@ static int mcp4531_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA)) {
dev_err(dev, "SMBUS Word Data not supported\n");
- return -EIO;
+ return -EOPNOTSUPP;
}
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c
index 9ea055c..1a29be4 100644
--- a/drivers/iio/pressure/mpl115_i2c.c
+++ b/drivers/iio/pressure/mpl115_i2c.c
@@ -42,7 +42,7 @@ static int mpl115_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
+ return -EOPNOTSUPP;
return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops);
}
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
index 42706a8..fcb2aff 100644
--- a/drivers/iio/pressure/ms5611_i2c.c
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -92,7 +92,7 @@ static int ms5611_i2c_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_WRITE_BYTE |
I2C_FUNC_SMBUS_READ_WORD_DATA |
I2C_FUNC_SMBUS_READ_I2C_BLOCK))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
if (!indio_dev)
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
index e8d0e0d..e68052c 100644
--- a/drivers/iio/pressure/ms5637.c
+++ b/drivers/iio/pressure/ms5637.c
@@ -136,7 +136,7 @@ static int ms5637_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
dev_err(&client->dev,
"Adapter does not support some i2c transaction\n");
- return -ENODEV;
+ return -EOPNOTSUPP;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c
index e11cd39..2667e71 100644
--- a/drivers/iio/pressure/t5403.c
+++ b/drivers/iio/pressure/t5403.c
@@ -221,7 +221,7 @@ static int t5403_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK))
- return -ENODEV;
+ return -EOPNOTSUPP;
ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR);
if (ret < 0)
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index db35e04..4f502386 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -278,7 +278,7 @@ static int lidar_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
data->xfer = lidar_smbus_xfer;
else
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
indio_dev->info = &lidar_info;
indio_dev->name = LIDAR_DRV_NAME;
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index a570c2e..4b645fc 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -516,7 +516,7 @@ static int mlx90614_probe(struct i2c_client *client,
int ret;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
index e78c106..18c9b43 100644
--- a/drivers/iio/temperature/tmp006.c
+++ b/drivers/iio/temperature/tmp006.c
@@ -205,7 +205,7 @@ static int tmp006_probe(struct i2c_client *client,
int ret;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
+ return -EOPNOTSUPP;
if (!tmp006_check_identification(client)) {
dev_err(&client->dev, "no TMP006 sensor\n");
diff --git a/drivers/iio/temperature/tsys01.c b/drivers/iio/temperature/tsys01.c
index 05c1206..3e60c61 100644
--- a/drivers/iio/temperature/tsys01.c
+++ b/drivers/iio/temperature/tsys01.c
@@ -190,7 +190,7 @@ static int tsys01_i2c_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
dev_err(&client->dev,
"Adapter does not support some i2c transaction\n");
- return -ENODEV;
+ return -EOPNOTSUPP;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c
index 4c1fbd5..ab6fe8f 100644
--- a/drivers/iio/temperature/tsys02d.c
+++ b/drivers/iio/temperature/tsys02d.c
@@ -137,7 +137,7 @@ static int tsys02d_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
dev_err(&client->dev,
"Adapter does not support some i2c transaction\n");
- return -ENODEV;
+ return -EOPNOTSUPP;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
