The only difference between the MPU6000 and the
MPU6050 is that the first also supports SPI.
Add SPI driver for this chip.
Signed-off-by: Adriana Reus <adriana.reus@xxxxxxxxx>
---
* Changed driver name
drivers/iio/imu/inv_mpu6050/Kconfig | 10 +++
drivers/iio/imu/inv_mpu6050/Makefile | 3 +
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 7 ++-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 6 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 97 ++++++++++++++++++++++++++++++
6 files changed, 122 insertions(+), 3 deletions(-)
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index b664858..a7f557a 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -21,3 +21,13 @@ config INV_MPU6050_I2C
This driver can be built as a module. The module will be called
inv-mpu6050-i2c.
+config INV_MPU6050_SPI
+ tristate "Invensense MPU6050 devices (SPI)"
+ depends on SPI_MASTER
+ select INV_MPU6050_IIO
+ select REGMAP_SPI
+ help
+ This driver supports the Invensense MPU6050 devices.
+ It is a gyroscope/accelerometer combo device.
+ This driver can be built as a module. The module will be called
+ inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile
index ca4941d..734af5e 100644
--- a/drivers/iio/imu/inv_mpu6050/Makefile
+++ b/drivers/iio/imu/inv_mpu6050/Makefile
@@ -7,3 +7,6 @@ inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o
obj-$(CONFIG_INV_MPU6050_I2C) += inv-mpu6050-i2c.o
inv-mpu6050-i2c-objs := inv_mpu_i2c.o inv_mpu_acpi.o
+
+obj-$(CONFIG_INV_MPU6050_SPI) += inv-mpu6050-spi.o
+inv-mpu6050-spi-objs := inv_mpu_spi.o
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 7b46db5..2258600 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -152,6 +152,7 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on)
return 0;
}
+EXPORT_SYMBOL_GPL(inv_mpu6050_set_power_itg);
/**
* inv_mpu6050_init_config() - Initialize hardware, disable FIFO.
@@ -676,7 +677,8 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
return 0;
}
-int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name)
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+ int (*inv_mpu_bus_setup)(struct iio_dev *))
{
struct inv_mpu6050_state *st;
struct iio_dev *indio_dev;
@@ -700,6 +702,9 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name)
if (result)
return result;
+ if (inv_mpu_bus_setup)
+ inv_mpu_bus_setup(indio_dev);
+
result = inv_mpu6050_init_config(indio_dev);
if (result) {
dev_err(dev, "Could not initialize device.\n");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index eeaf969..af400dd 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -129,7 +129,7 @@ static int inv_mpu_probe(struct i2c_client *client,
return PTR_ERR(regmap);
}
- result = inv_mpu_core_probe(regmap, client->irq, name);
+ result = inv_mpu_core_probe(regmap, client->irq, name, NULL);
if (result < 0)
return result;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 1bf65a0..fcc2f3d 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -62,6 +62,7 @@ struct inv_mpu6050_reg_map {
enum inv_devices {
INV_MPU6050,
INV_MPU6500,
+ INV_MPU6000,
INV_NUM_PARTS
};
@@ -154,6 +155,7 @@ struct inv_mpu6050_state {
#define INV_MPU6050_BIT_I2C_MST_EN 0x20
#define INV_MPU6050_BIT_FIFO_EN 0x40
#define INV_MPU6050_BIT_DMP_EN 0x80
+#define INV_MPU6050_BIT_I2C_IF_DIS 0x10
#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
#define INV_MPU6050_BIT_H_RESET 0x80
@@ -258,6 +260,8 @@ int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
int inv_mpu_acpi_create_mux_client(struct i2c_client *client);
void inv_mpu_acpi_delete_mux_client(struct i2c_client *client);
-int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name);
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+ int (*inv_mpu_bus_setup)(struct iio_dev *));
int inv_mpu_core_remove(struct device *dev);
+int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
extern const struct dev_pm_ops inv_mpu_pmops;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
new file mode 100644
index 0000000..5b552a6
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -0,0 +1,97 @@
+/*
+* Copyright (C) 2015 Intel Corporation Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int inv_mpu_i2c_disable(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret = 0;
+
+ ret = inv_mpu6050_set_power_itg(st, true);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(st->map, INV_MPU6050_REG_USER_CTRL,
+ INV_MPU6050_BIT_I2C_IF_DIS);
+ if (ret) {
+ inv_mpu6050_set_power_itg(st, false);
+ return ret;
+ }
+
+ return inv_mpu6050_set_power_itg(st, false);
+}
+
+static int inv_mpu_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ const char *name = id ? id->name : NULL;
+
+ regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "Failed to register spi regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return inv_mpu_core_probe(regmap, spi->irq, name, inv_mpu_i2c_disable);
+}
+
+static int inv_mpu_remove(struct spi_device *spi)
+{
+ return inv_mpu_core_remove(&spi->dev);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct spi_device_id inv_mpu_id[] = {
+ {"mpu6000", INV_MPU6000},
+ {}
+};
+
+MODULE_DEVICE_TABLE(spi, inv_mpu_id);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+ {"INVN6000", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct spi_driver inv_mpu_driver = {
+ .probe = inv_mpu_probe,
+ .remove = inv_mpu_remove,
+ .id_table = inv_mpu_id,
+ .driver = {
+ .acpi_match_table = ACPI_PTR(inv_acpi_match),
+ .name = "inv-mpu6000-spi",
+ .pm = &inv_mpu_pmops,
+ },
+};
+
+module_spi_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Adriana Reus <adriana.reus@xxxxxxxxx>");
+MODULE_DESCRIPTION("Invensense device MPU6000 driver");
+MODULE_LICENSE("GPL");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
