This accelerometer accidentally either emits a DRDY signal or an
IRQ signal. Accidentally I activated the IRQ signal as I thought
it was analogous to the interrupt generator on other ST
accelerometers. This was wrong. After this patch generic_buffer
gives a nice stream of accelerometer readings.
Fixes: 3acddf74f807778f "iio: st-sensors: add support for lis3lv02d accelerometer"
Cc: Denis CIOCCA <denis.ciocca@xxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/iio/accel/st_accel_core.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 058c87d9f564..6765eebb7c0a 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -149,8 +149,6 @@
#define ST_ACCEL_4_BDU_MASK 0x40
#define ST_ACCEL_4_DRDY_IRQ_ADDR 0x21
#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK 0x04
-#define ST_ACCEL_4_IG1_EN_ADDR 0x21
-#define ST_ACCEL_4_IG1_EN_MASK 0x08
#define ST_ACCEL_4_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 5 */
@@ -484,10 +482,6 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.drdy_irq = {
.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
- .ig1 = {
- .en_addr = ST_ACCEL_4_IG1_EN_ADDR,
- .en_mask = ST_ACCEL_4_IG1_EN_MASK,
- },
},
.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
.bootime = 2, /* guess */
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
