On Thu, Aug 20, 2015 at 08:50:28AM -0700, Greg Wilson-Lindberg wrote: > > > > -----Original Message----- > > From: Michael Welling [mailto:mwelling79@xxxxxxxxx] On Behalf > > Of Michael Welling > > Sent: Wednesday, August 19, 2015 2:43 PM > > To: Greg Wilson-Lindberg > > Cc: Daniel Baluta; linux-iio@xxxxxxxxxxxxxxx > > Subject: Re: BBB IIO ADC access not working > > > > On Wed, Aug 19, 2015 at 02:34:39PM -0700, Greg Wilson-Lindberg wrote: > > > > > > So, in that case, can I just open it once and leave it open? > > > > Yes. > > > > > Is it reading from a buffer, or is it reading what is > > current in the ADC? > > > > It is the current reading. > > > > > Can I just set up a timer to get readings to average then? > > > > Sure. > > > > Here are some helper functions: > > > > int iio_adc_open_channel(int dev_num, int chan_num) { > > char filename[255]; > > > > sprintf(filename, > > "/sys/bus/iio/devices/iio:device%d/in_voltage%d_raw", > > dev_num, chan_num); > > > > return open(filename, O_RDONLY); > > } > > > > int iio_adc_read_channel(int fd) > > { > > int count; > > char buffer[255]; > > int value = -1; > > > > lseek(fd,0,SEEK_SET); > > > > count = read(fd, buffer, 255); > > > > if (count > 0) > > value = strtoul(buffer, NULL, 10); > > > > return value; > > } > > > > Example usage: > > > > int fd; > > . > > . > > > > fd = iio_adc_open_channel(0, 4); > > . > > . > > > > while (1) > > { > > printf("ADC = %x\n", iio_adc_read_channel(fd)); } > > > > > > I converted to using this interface and left the system running overnight and > the touch screen was locked up this morning. This is without any modifications to the kernel? -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
