On Thu, 2015-08-20 at 12:39 +0800, Zhang Rui wrote:
> On Mon, 2015-08-17 at 16:52 -0700, Srinivas Pandruvada wrote:
> > The only method to read temperature of a thermal zone is by reading
> > sysfs
> > entry "temp". This works well when kernel is primarily doing
> > thermal
> > control and user mode tools/applications are reading temperature
> > for
> > display or debug purposes. But when user mode is doing primary
> > thermal
> > control using a "user space" governor, this model causes
> > performance
> > issues and have limitations. For example Linux thermal daemon or
> > Intel®
> > Dynamic Platform and Thermal Framework (DPTF) for Chromium/Chrome
> > OS are
> > currently used as user space thermal controllers in several
> > products.
> > We have platforms with 10+ thermal sensors and thermal conditions
> > are not
> > an isolated cases, so it is important to manage thermal conditions
> > without
> > significantly degrading user experience. So we need an efficient
> > way to
> > read temperature and events, by
> > - Not using polling from user space
> > - Avoid sysfs string read for temperature and convert to decimal
> > - Push model, so that driver can push changes when some temperature
> > change event occurs, which needs attention
> > - Let user space registers for some thresholds without using some
> > passive trips
> > - Avoid string based kobject uevent notifications
> > - Able to use different external trigger (data ready indications)
> > and push
> > temperature samples
> >
> > There are some ways to achieve this using thermal sysfs 2.0, but
> > still
> > doesn't meet all requirements and will introduce backward
> > compatibility
> > issues. Other option is to enhance thermal sysfs by adding a sensor
> > abstractions and providing a dev interface for poll/select. But
> > since
> > since Linux IIO already provides above capabilities, it is better
> > we
> > reuse IIO temperature sensor device. This change proposes use of
> > IIO
> > temperature sensor device for a thermal zone. Here IIO capabilities
> > of triggered buffer and events are utilized.
> >
> > The iio device created during call to thermal_zone_device_register.
> > Samples are pushed to iio buffers when thermal_zone_device_update
> > is
> > called from client drivers and user space governor is selected for
> > the
> > thermal zone. Only two additional callbacks for client driver to
> > get/set
> > thermal temperature thresholds.
> >
> > Signed-off-by: Srinivas Pandruvada <
> > srinivas.pandruvada@xxxxxxxxxxxxxxx>
> > ---
> > drivers/thermal/Kconfig | 11 ++
> > drivers/thermal/Makefile | 1 +
> > drivers/thermal/thermal_core.c | 9 +-
> > drivers/thermal/thermal_iio.c | 333
> > +++++++++++++++++++++++++++++++++++++++++
> > drivers/thermal/user_space.c | 1 +
> > include/linux/thermal.h | 46 ++++++
> > 6 files changed, 399 insertions(+), 2 deletions(-)
> > create mode 100644 drivers/thermal/thermal_iio.c
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 118938e..0ea9d8b 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -29,6 +29,17 @@ config THERMAL_HWMON
> > Say 'Y' here if you want all thermal sensors to
> > have hwmon sysfs interface too.
> >
> > +config THERMAL_IIO
> > + tristate "Thermal sensor from a zone as IIO device"
> > + select IIO
> > + select IIO_BUFFER
> > + select IIO_TRIGGERED_BUFFER
> > + help
> > + This will register thermal sensor in a zone as an IIO
> > temperature
> > + sensor device.
> > + This will help user space thermal controllers to use IIO
> > ABI to
> > + get events and buffered acces to temperature samples.
> > +
> > config THERMAL_OF
> > bool
> > prompt "APIs to parse thermal data out of device tree"
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index 535dfee..4b42734 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -7,6 +7,7 @@ thermal_sys-y +=
> > thermal_core.o
> >
> > # interface to/from other layers providing sensors
> > thermal_sys-$(CONFIG_THERMAL_HWMON) +=
> > thermal_hwmon.o
> > +thermal_sys-$(CONFIG_THERMAL_IIO) += thermal_iio.o
> > thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o
> >
> > # governors
> > diff --git a/drivers/thermal/thermal_core.c
> > b/drivers/thermal/thermal_core.c
> > index 04659bf..483a4a1 100644
> > --- a/drivers/thermal/thermal_core.c
> > +++ b/drivers/thermal/thermal_core.c
> > @@ -1833,10 +1833,15 @@ struct thermal_zone_device
> > *thermal_zone_device_register(const char *type,
> >
> > mutex_unlock(&thermal_governor_lock);
> >
> > + if (thermal_iio_sensor_register(tz))
> > + goto unregister;
> > +
> > if (!tz->tzp || !tz->tzp->no_hwmon) {
> > result = thermal_add_hwmon_sysfs(tz);
> > - if (result)
> > + if (result) {
> > + thermal_iio_sensor_unregister(tz);
> > goto unregister;
> > + }
> > }
> >
> > mutex_lock(&thermal_list_lock);
> > @@ -1919,7 +1924,7 @@ void thermal_zone_device_unregister(struct
> > thermal_zone_device *tz)
> > device_remove_file(&tz->device, &dev_attr_policy);
> > remove_trip_attrs(tz);
> > thermal_set_governor(tz, NULL);
> > -
> > + thermal_iio_sensor_unregister(tz);
> > thermal_remove_hwmon_sysfs(tz);
> > release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
> > idr_destroy(&tz->idr);
> > diff --git a/drivers/thermal/thermal_iio.c
> > b/drivers/thermal/thermal_iio.c
> > new file mode 100644
> > index 0000000..e36ad90
> > --- /dev/null
> > +++ b/drivers/thermal/thermal_iio.c
> > @@ -0,0 +1,333 @@
> > +/*
> > + * thermal iio interface driver
> > + * Copyright (c) 2015, Intel Corporation.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > modify it
> > + * under the terms and conditions of the GNU General Public
> > License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of
> > MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> > License for
> > + * more details.
> > + */
> > +
> > +#include <linux/thermal.h>
> > +
> > +struct thermal_iio_data {
> > + struct thermal_zone_device *tz;
> > + struct iio_trigger *dready_trig;
> > + s16 buffer[8];
> > + bool enable;
> > + long temp_thres;
> > + bool ev_enable_state;
> > + struct mutex mutex;
> > +
> > +};
> > +
> > +static const struct iio_event_spec thermal_event = {
> > + .type = IIO_EV_TYPE_THRESH,
> > + .dir = IIO_EV_DIR_EITHER,
> > + .mask_separate = BIT(IIO_EV_INFO_VALUE) |
> > + BIT(IIO_EV_INFO_ENABLE)
> > +};
> > +
> > +#define THERMAL_TEMP_CHANNELS {
> > \
> > + {
> > \
> > + .type = IIO_TEMP,
> > \
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > \
> > + .scan_index = 0,
> > \
> > + .scan_type = {
> > \
> > + .sign = 'u',
> > \
> > + .realbits = 32,
> > \
> > + .storagebits = 32,
> > \
> > + .shift = 0,
> > \
> > + .endianness = IIO_CPU,
> > \
> > + },
> > \
> > + .event_spec = &thermal_event,
> > \
> > + .num_event_specs = 1
> > \
> > + },
> > \
> > +}
> > +
> > +static const struct iio_chan_spec thermal_iio_channels[] =
> > + THERMAL_TE
> > MP_CHANNELS;
> > +
> > +static int thermal_iio_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val, int *val2, long mask)
> > +{
> > + struct thermal_iio_data *iio_data = iio_priv(indio_dev);
> > + long temp;
> > + int ret;
> > +
> > + switch (mask) {
> > + case IIO_CHAN_INFO_RAW:
> > + ret = thermal_zone_get_temp(iio_data->tz, &temp);
> > + if (ret)
> > + return ret;
> > + *val = (int) temp;
> > + return IIO_VAL_INT;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static irqreturn_t thermal_trigger_handler(int irq, void *p)
> > +{
> > + struct iio_poll_func *pf = p;
> > + struct iio_dev *indio_dev = pf->indio_dev;
> > + struct thermal_iio_data *iio_data = iio_priv(indio_dev);
> > + long temp;
> > + int ret;
> > +
> > + ret = thermal_zone_get_temp(iio_data->tz, &temp);
> > + if (ret)
> > + goto err_read;
> > +
> > + *(s32 *)iio_data->buffer = (s32)temp;
> > + iio_push_to_buffers(indio_dev, iio_data->buffer);
> > +err_read:
> > + iio_trigger_notify_done(indio_dev->trig);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int thermal_data_rdy_trigger_set_state(struct iio_trigger
> > *trig,
> > + bool state)
> > +{
> > + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> > + struct thermal_iio_data *iio_data = iio_priv(indio_dev);
> > +
> > + mutex_lock(&iio_data->mutex);
> > + iio_data->enable = state;
> > + mutex_unlock(&iio_data->mutex);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct iio_trigger_ops thermal_trigger_ops = {
> > + .set_trigger_state = thermal_data_rdy_trigger_set_state,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static int thermal_iio_read_event(struct iio_dev *indio_dev,
> > + const struct iio_chan_spec
> > *chan,
> > + enum iio_event_type type,
> > + enum iio_event_direction dir,
> > + enum iio_event_info info,
> > + int *val, int *val2)
> > +{
> > + struct thermal_iio_data *iio_data = iio_priv(indio_dev);
> > + int ret;
> > +
> > + mutex_lock(&iio_data->mutex);
> > + *val2 = 0;
> > + switch (info) {
> > + case IIO_EV_INFO_VALUE:
> > + *val = iio_data->temp_thres;
> > + ret = IIO_VAL_INT;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > + mutex_unlock(&iio_data->mutex);
> > +
> > + return ret;
> > +}
> > +
> > +static int thermal_iio_write_event(struct iio_dev *indio_dev,
> > + const struct iio_chan_spec
> > *chan,
> > + enum iio_event_type type,
> > + enum iio_event_direction dir,
> > + enum iio_event_info info,
> > + int val, int val2)
> > +{
> > + struct thermal_iio_data *iio_data = iio_priv(indio_dev);
> > + int ret = 0;
> > +
> > + mutex_lock(&iio_data->mutex);
> > + if (iio_data->ev_enable_state) {
> > + ret = -EBUSY;
> > + goto done_write_event;
> > + }
> > + switch (info) {
> > + case IIO_EV_INFO_VALUE:
> > + iio_data->temp_thres = val;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > +done_write_event:
> > + mutex_unlock(&iio_data->mutex);
> > +
> > + return ret;
> > +}
> > +
> > +static int thermal_iio_read_event_config(struct iio_dev
> > *indio_dev,
> > + const struct
> > iio_chan_spec *chan,
> > + enum iio_event_type type,
> > + enum iio_event_direction
> > dir)
> > +{
> > +
> > + struct thermal_iio_data *iio_data = iio_priv(indio_dev);
> > + bool state;
> > +
> > + mutex_lock(&iio_data->mutex);
> > + state = iio_data->ev_enable_state;
> > + mutex_unlock(&iio_data->mutex);
> > +
> > + return state;
> > +}
> > +
> > +static int thermal_iio_write_event_config(struct iio_dev
> > *indio_dev,
> > + const struct
> > iio_chan_spec *chan,
> > + enum iio_event_type
> > type,
> > + enum iio_event_direction
> > dir,
> > + int state)
> > +{
> > + struct thermal_iio_data *iio_data = iio_priv(indio_dev);
> > + int ret = 0;
> > +
> > + mutex_lock(&iio_data->mutex);
> > + if (state && iio_data->ev_enable_state)
> > + goto done_write_event;
> > +
> > + if (iio_data->tz->ops->set_threshold_temp)
> > + ret = iio_data->tz->ops
> > ->set_threshold_temp(iio_data->tz, 0,
> > + iio_data
> > ->temp_thres);
> > + iio_data->ev_enable_state = state;
> > +
> > +done_write_event:
> > + mutex_unlock(&iio_data->mutex);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct iio_info thermal_iio_info = {
> > + .read_raw = thermal_iio_read_raw,
> > + .read_event_value = thermal_iio_read_event,
> > + .write_event_value = thermal_iio_write_event,
> > + .write_event_config =
> > thermal_iio_write_event_config,
> > + .read_event_config = thermal_iio_read_event_config,
> > + .driver_module = THIS_MODULE,
> > +};
> > +
> > +int thermal_iio_sensor_register(struct thermal_zone_device *tz)
> > +{
> > + struct thermal_iio_data *iio_data;
> > + int ret;
> > +
> > + tz->indio_dev = devm_iio_device_alloc(&tz->device,
> > sizeof(*iio_data));
> > + if (!tz->indio_dev)
> > + return -ENOMEM;
> > +
> > + iio_data = iio_priv(tz->indio_dev);
> > + iio_data->tz = tz;
> > + mutex_init(&iio_data->mutex);
> > +
> > + tz->indio_dev->dev.parent = &tz->device;
> > + tz->indio_dev->channels = thermal_iio_channels;
> > + tz->indio_dev->num_channels =
> > ARRAY_SIZE(thermal_iio_channels);
> > + tz->indio_dev->name = tz->type;
> > + tz->indio_dev->info = &thermal_iio_info;
> > + tz->indio_dev->modes = INDIO_DIRECT_MODE;
> > +
> > + iio_data->dready_trig = devm_iio_trigger_alloc(&tz
> > ->device, "%s-dev%d",
> > + tz->type,
> > + tz
> > ->indio_dev->id);
> > + if (iio_data->dready_trig == NULL) {
> > + dev_err(&tz->device, "Trigger Allocate Failed\n");
> > + return -ENOMEM;
> > + }
> > +
> > + iio_data->dready_trig->dev.parent = &tz->device;
> > + iio_data->dready_trig->ops = &thermal_trigger_ops;
> > + iio_trigger_set_drvdata(iio_data->dready_trig, tz
> > ->indio_dev);
> > + tz->indio_dev->trig = iio_data->dready_trig;
> > + iio_trigger_get(tz->indio_dev->trig);
> > + ret = iio_trigger_register(iio_data->dready_trig);
> > + if (ret) {
> > + dev_err(&tz->device, "Trigger Allocate Failed\n");
> > + return ret;
> > + }
> > +
> > + ret = iio_triggered_buffer_setup(tz->indio_dev,
> > + &iio_pollfunc_store_time,
> > + thermal_trigger_handler,
> > NULL);
> > + if (ret) {
> > + dev_err(&tz->device, "failed to initialize trigger
> > buffer\n");
> > + goto err_unreg_trig;
> > + }
> > +
> > + ret = iio_device_register(tz->indio_dev);
> > + if (ret < 0) {
> > + dev_err(&tz->device, "unable to register iio
> > device\n");
> > + goto err_cleanup_trig;
> > + }
> > +
> > + return 0;
> > +
> > +err_cleanup_trig:
> > + iio_triggered_buffer_cleanup(tz->indio_dev);
> > +err_unreg_trig:
> > + iio_device_unregister(tz->indio_dev);
> > +
> > + return ret;
> > +}
> > +
> > +int thermal_iio_sensor_unregister(struct thermal_zone_device *tz)
> > +{
> > + struct thermal_iio_data *iio_data = iio_priv(tz
> > ->indio_dev);
> > +
> > + iio_device_unregister(tz->indio_dev);
> > + iio_triggered_buffer_cleanup(tz->indio_dev);
> > + iio_trigger_unregister(iio_data->dready_trig);
> > +
> > + return 0;
> > +}
> > +
> > +#define IIO_EVENT_CODE_THERMAL_THRES
> > IIO_UNMOD_EVENT_CODE(IIO_TEMP, 0,\
> > +
> > IIO_EV_TYPE_THRESH,\
> > +
> > IIO_EV_DIR_EITHER)
> > +
> > +#define IIO_EVENT_CODE_TRIP_UPDATE IIO_UNMOD_EVENT_CODE(IIO_TEMP,
> > 0,\
> > + IIO_EV_TYP
> > E_CHANGE,\
> > + IIO_EV_DIR
> > _NONE)
> > +
> > +int thermal_iio_sensor_notify(struct thermal_zone_device *tz,
> > + enum thermal_zone_event_type event)
> > +{
> > + struct thermal_iio_data *iio_data = iio_priv(tz
> > ->indio_dev);
> > + long temp = 0;
> > + int ret;
> > +
> > + mutex_lock(&iio_data->mutex);
> > + if (iio_data->ev_enable_state) {
> > + if (event == THERMAL_TEMP_THRESHOLD)
> > + iio_push_event(tz->indio_dev,
> > +
> > IIO_EVENT_CODE_THERMAL_THRES,
> > + iio_get_time_ns());
> > + else if (event == THERMAL_TRIP_UPDATE)
> > + iio_push_event(tz->indio_dev,
> > + IIO_EVENT_CODE_TRIP_UPDATE,
> > + iio_get_time_ns());
> > + else
> > + dev_err(&tz->device, "invalid event\n");
> > + }
> > + if (iio_data->enable) {
> > + ret = thermal_zone_get_temp(iio_data->tz, &temp);
> > + if (ret)
> > + goto err_read;
> > + *(u32 *)iio_data->buffer = (u32)temp;
> > + iio_push_to_buffers(tz->indio_dev, iio_data
> > ->buffer);
> > + }
> > + mutex_unlock(&iio_data->mutex);
> > +
> > + return 0;
> > +err_read:
> > + mutex_unlock(&iio_data->mutex);
> > + return ret;
> > +}
> > diff --git a/drivers/thermal/user_space.c
> > b/drivers/thermal/user_space.c
> > index 10adcdd..742adec 100644
> > --- a/drivers/thermal/user_space.c
> > +++ b/drivers/thermal/user_space.c
> > @@ -34,6 +34,7 @@
> > */
> > static int notify_user_space(struct thermal_zone_device *tz, int
> > trip)
> > {
> > + thermal_iio_sensor_notify(tz, THERMAL_TEMP_THRESHOLD);
> > mutex_lock(&tz->lock);
> > kobject_uevent(&tz->device.kobj, KOBJ_CHANGE);
> > mutex_unlock(&tz->lock);
> > diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> > index 037e9df..4c4c487 100644
> > --- a/include/linux/thermal.h
> > +++ b/include/linux/thermal.h
> > @@ -31,6 +31,16 @@
> > #include <linux/workqueue.h>
> > #include <uapi/linux/thermal.h>
> >
> > +#if IS_ENABLED(CONFIG_THERMAL_IIO)
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/sysfs.h>
> > +#include <linux/iio/buffer.h>
> > +#include <linux/iio/trigger.h>
> > +#include <linux/iio/events.h>
> > +#include <linux/iio/trigger_consumer.h>
> > +#include <linux/iio/triggered_buffer.h>
> > +#endif
> > +
>
> IMO, we only need to reference linux/iio/iio.h in this header, all
> the
> others should be moved to drivers/thermal/thermal_iio.c.
>
> Plus, I'm curious why iio subsystem has so many different external
> headers for driver to reference.
>
I will check on this.
Thanks,
Srinivas
> thanks,
> rui
>
> > #define THERMAL_TRIPS_NONE -1
> > #define THERMAL_MAX_TRIPS 12
> >
> > @@ -111,6 +121,10 @@ struct thermal_zone_device_ops {
> > int (*set_emul_temp) (struct thermal_zone_device *,
> > unsigned long);
> > int (*get_trend) (struct thermal_zone_device *, int,
> > enum thermal_trend *);
> > + int (*get_threshold_temp)(struct thermal_zone_device *,
> > int,
> > + unsigned long *);
> > + int (*set_threshold_temp)(struct thermal_zone_device *,
> > int,
> > + unsigned long);
> > int (*notify) (struct thermal_zone_device *, int,
> > enum thermal_trip_type);
> > };
> > @@ -205,6 +219,9 @@ struct thermal_zone_device {
> > struct mutex lock;
> > struct list_head node;
> > struct delayed_work poll_queue;
> > +#ifdef CONFIG_THERMAL_IIO
> > + struct iio_dev *indio_dev;
> > +#endif
> > };
> >
> > /**
> > @@ -483,4 +500,33 @@ static inline int
> > thermal_generate_netlink_event(struct thermal_zone_device *tz,
> > }
> > #endif
> >
> > +enum thermal_zone_event_type {
> > + THERMAL_TEMP_THRESHOLD,
> > + THERMAL_TRIP_UPDATE,
> > + THERMAL_EVENT_TYPE_MAX,
> > +};
> > +
> > +#if IS_ENABLED(CONFIG_THERMAL) && IS_ENABLED(CONFIG_THERMAL_IIO)
> > +int thermal_iio_sensor_register(struct thermal_zone_device *tz);
> > +int thermal_iio_sensor_unregister(struct thermal_zone_device *tz);
> > +int thermal_iio_sensor_notify(struct thermal_zone_device *tz,
> > + enum thermal_zone_event_type event);
> > +#else
> > +static int thermal_iio_sensor_register(struct thermal_zone_device
> > *tz)
> > +{
> > + return 0;
> > +}
> > +
> > +static int thermal_iio_sensor_unregister(struct
> > thermal_zone_device *tz)
> > +{
> > + return 0;
> > +}
> > +
> > +static int thermal_iio_sensor_notify(struct thermal_zone_device
> > *tz
> > + enum thermal_zone_event_type
> > event)
> > +{
> > + return 0;
> > +}
> > +#endif
> > +
> > #endif /* __THERMAL_H__ */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
