On 18 August 2015 16:28:20 BST, Adriana Reus <adriana.reus@xxxxxxxxx> wrote: >Thanks for the review, added some comments inline, next patch set >coming >soon. > >Adriana > >On 15.08.2015 17:27, Jonathan Cameron wrote: >> On 14/08/15 10:29, Adriana Reus wrote: >>> Add support for UPISEMI us5182d als and proximity sensor. >>> Supports raw readings. >>> Data sheet for this device can be found here: >>> http://www.upi-semi.com/temp/uS5182D-DS-P0103-temp.pdf >>> >>> Signed-off-by: Adriana Reus <adriana.reus@xxxxxxxxx> >> Mostly looking pretty good. I've partly been (slightly) pickier than >normal >> here because we are stalled for a few weeks anyway by the fact the >merge >> window for IIO is now probably done (about a week before Linus opens >his) >> and also we have device tree docs that will need comments or to sit >for >> quite a while on the mailing list. >> >> Thanks, >> >> Jonathan >>> --- >>> Changes since v2: >>> - Adressed Peter's comments (with the exception of setting >>> the ths_vals array as const - if I do that the compiler will >>> eventually whine because it gets passed as an argument to >device_property_read). >> That should be a giveaway that you want to have a copy rather than >one >> instance of this. Stick a copy in your data structure with defaults >> if no others are supplied. >> >> Note we might have two different instances of this part on one device >> with different thresholds... >> >> >>> - Tried to break down the compound register values into more >intuitive definitions. >> Much improved . >>> - Eliminated the read helper functions. >>> >>> drivers/iio/light/Kconfig | 10 + >>> drivers/iio/light/Makefile | 1 + >>> drivers/iio/light/us5182d.c | 484 >++++++++++++++++++++++++++++++++++++++++++++ >>> 3 files changed, 495 insertions(+) >>> create mode 100644 drivers/iio/light/us5182d.c >>> >>> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig >>> index 7ed859a..0442f01 100644 >>> --- a/drivers/iio/light/Kconfig >>> +++ b/drivers/iio/light/Kconfig >>> @@ -287,6 +287,16 @@ config TSL4531 >>> To compile this driver as a module, choose M here: the >>> module will be called tsl4531. >>> >>> +config US5182D >>> + tristate "UPISEMI light and proximity sensor" >>> + depends on I2C >>> + help >>> + If you say yes here you get support for the UPISEMI US5182D >>> + ambient light and proximity sensor. >>> + >>> + This driver can also be built as a module. If so, the module >>> + will be called us5182d. >>> + >>> config VCNL4000 >>> tristate "VCNL4000 combined ALS and proximity sensor" >>> depends on I2C >>> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile >>> index 91c74c0..528cc8f 100644 >>> --- a/drivers/iio/light/Makefile >>> +++ b/drivers/iio/light/Makefile >>> @@ -27,4 +27,5 @@ obj-$(CONFIG_STK3310) += stk3310.o >>> obj-$(CONFIG_TCS3414) += tcs3414.o >>> obj-$(CONFIG_TCS3472) += tcs3472.o >>> obj-$(CONFIG_TSL4531) += tsl4531.o >>> +obj-$(CONFIG_US5182D) += us5182d.o >>> obj-$(CONFIG_VCNL4000) += vcnl4000.o >>> diff --git a/drivers/iio/light/us5182d.c >b/drivers/iio/light/us5182d.c >>> new file mode 100644 >>> index 0000000..9ba99f5 >>> --- /dev/null >>> +++ b/drivers/iio/light/us5182d.c >>> @@ -0,0 +1,484 @@ >>> +/* >>> + * Copyright (c) 2015 Intel Corporation >>> + * >>> + * Driver for UPISEMI us5182d Proximity and Ambient Light Sensor. >>> + * >>> + * This program is free software; you can redistribute it and/or >modify it >>> + * under the terms of the GNU General Public License version 2 as >published by >>> + * the Free Software Foundation. >>> + * >>> + * This program is distributed in the hope it will be useful, but >WITHOUT >>> + * ANY WARRANTY; without even the implied warranty of >MERCHANTABILITY or >>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public >License for >>> + * more details. >>> + * >>> + * To do: Interrupt support. >>> + */ >>> + >>> +#include <linux/kernel.h> >>> +#include <linux/module.h> >>> +#include <linux/acpi.h> >>> +#include <linux/delay.h> >>> +#include <linux/i2c.h> >>> +#include <linux/iio/iio.h> >>> +#include <linux/iio/sysfs.h> >>> +#include <linux/mutex.h> >>> + >>> +#define US5182D_REG_CFG0 0x00 >>> +#define US5182D_REG_CFG1 0x01 >>> +#define US5182D_REG_CFG2 0x02 >>> +#define US5182D_REG_CFG3 0x03 >>> +#define US5182D_REG_CFG4 0x10 >>> + >>> +/* >>> + * Registers for tuning the auto dark current cancelling feature. >>> + * DARK_TH(reg 0x27,0x28) - threshold (counts) for auto dark >cancelling. >>> + * when ALS > DARK_TH --> ALS_Code = ALS - Upper(0x2A) * Dark >>> + * when ALS < DARK_TH --> ALS_Code = ALS - Lower(0x29) * Dark >>> + */ >>> +#define US5182D_REG_UDARK_TH 0x27 >>> +#define US5182D_REG_DARK_AUTO_EN 0x2b >>> +#define US5182D_REG_AUTO_LDARK_GAIN 0x29 >>> +#define US5182D_REG_AUTO_HDARK_GAIN 0x2a >>> + >> I'd be tempted to name these to make it clear which reg >> they are in. >> US5182D_CFG0_ONESHOT_EN etc. >> Hartmut did a nice tidy up of another driver the other day. >> He pulled the register address and elements down into one >> place and used a it of indenting to make it easy to read. >> >> For example. >> >> #define US5182D_REG_CFG0 0x00 >> #define US5182D_CFG0_ONESHOT_EN BIT(6) >> #define US5182D_SHUTDOWN_EN BIT(7) >> >> etc. Just a suggestion! I don't really care as long as it >> is clear what the register map is! > >> >>> +#define US5182D_ONESHOT_EN BIT(6) >>> +#define US5182D_SHUTDOWN_EN BIT(7) >>> +#define US5182D_OPMODE_ALS 0x01 >>> +#define US5182D_OPMODE_PX 0x02 >>> +#define US5182D_OPMODE_SHIFT 4 >>> +#define US5182D_WORD_ENABLE BIT(0) >>> +#define US5182D_ALS_RES16 BIT(4) >>> +#define US5182D_PX_RES16 BIT(4) >>> +#define US5182D_PXGAIN_DEFAULT BIT(2) >>> +#define US5182D_LED_CURRENT100 (BIT(4) | BIT(5)) >>> + >>> +#define US5182D_REG_CFG0_DEFAULT \ >>> + (US5182D_SHUTDOWN_EN | US5182D_WORD_ENABLE) >> I'm missing something here, but SHUTDOWN_EN is never disabled? >> I'd have assumed that meant the device was always off! > >In oneshot mode the chip gets powered off automatically after taking >the >required measurement. I'll add a comment. >> >> Guessing some magic is going on that might want a comment here. >> (just read datasheet section on this so I now understand what you >> how this works, but please add a brief explanation, perhaps >> where you set the oneshot enable). >> >> Also more I'd not bother having these defined like this >> up here. Doesn't add anything over using them directly >> in the array below. >> >>> +#define US5182D_REG_CFG1_DEFAULT US5182D_ALS_RES16 >>> +#define US5182D_REG_CFG2_DEFAULT \ >>> + (US5182D_PX_RES16 | US5182D_PXGAIN_DEFAULT) >>> +#define US5182D_REG_CFG3_DEFAULT US5182D_LED_CURRENT100 >>> +#define US5182D_REG_CFG4_DEFAULT 0x00 >>> + >>> +#define US5182D_REG_DARK_AUTO_EN_DEFAULT 0x80 >>> +#define US5182D_REG_AUTO_LDARK_GAIN_DEFAULT 0x16 >>> +#define US5182D_REG_AUTO_HDARK_GAIN_DEFAULT 0x00 >>> + >>> +#define US5182D_REG_ADL 0x0c >>> +#define US5182D_REG_PDL 0x0e >>> + >>> +#define US5182D_REG_MODE_STORE 0x21 >>> +#define US5182D_STORE_MODE 0x01 >>> + >>> +#define US5182D_REG_CHIPID 0xb2 >>> + >>> +#define US5182D_OPMODE_MASK GENMASK(5, 4) >>> +#define US5182D_AGAIN_MASK 0x07 >>> +#define US5182D_RESET_CHIP 0x01 >>> + >>> +#define US5182D_CHIPID 0x26 >>> +#define US5182D_DRV_NAME "us5182d" >>> + >>> +#define US5182D_GA_RESOLUTION 1000 >>> + >>> +#define US5182D_READ_BYTE 1 >>> +#define US5182D_READ_WORD 2 >>> +#define US5182D_OPSTORE_SLEEP_TIME 20 /* ms */ >>> + >>> +/* available ranges: [12354, 7065, 3998, 2202, 1285, 498, 256, 138] >lux */ >>> +static const int us5182d_scales[] = {188500, 107800, 61000, 33600, >19600, 7600, >>> + 3900, 2100}; >>> + >>> +/* >>> + * experimental th's that work with US5182D sensor on evaluation >board >>> + * roughly between 12-32 lux >> Experimental (or I'll get a trivial batch within a day or so 'fixing' >it ;) >> Also long hand 'th' in the comment (thresholds persumably?). >ok >>> + */ >>> +static u16 us5182d_dark_ths_vals[] = {170, 200, 512, 512, 800, >2000, 4000, >>> + 8000}; >>> + >>> +enum mode { >>> + US5182D_ALS_PX, >>> + US5182D_ALS_ONLY, >>> + US5182D_PX_ONLY >>> +}; >>> + >>> +struct us5182d_data { >>> + struct i2c_client *client; >>> + /* protect opmode */ >> Why not name it to indicate such? >>> + struct mutex lock; >>> + >>> + /* Glass attenuation factor */ >>> + u32 ga; >>> + >>> + /* Dark gain tuning */ >>> + u8 lower_dark_gain; >>> + u8 upper_dark_gain; >>> + u16 *us5182d_dark_ths; >>> + >>> + u8 opmode; >>> +}; >>> + >>> +static IIO_CONST_ATTR(in_illuminance_scale_available, >>> + "0.0021 0.0039 0.0076 0.0196 0.0336 0.061 0.1078 0.1885"); >>> + >>> +static struct attribute *us5182d_attrs[] = { >>> + &iio_const_attr_in_illuminance_scale_available.dev_attr.attr, >>> + NULL >>> +}; >>> + >>> +static const struct attribute_group us5182d_attr_group = { >>> + .attrs = us5182d_attrs, >>> +}; >>> + >>> +static const struct { >>> + u8 reg; >>> + u8 val; >>> +} us5182d_regvals[] = { >>> + {US5182D_REG_CFG0, US5182D_REG_CFG0_DEFAULT}, >>> + {US5182D_REG_CFG1, US5182D_REG_CFG1_DEFAULT}, >>> + {US5182D_REG_CFG2, US5182D_REG_CFG2_DEFAULT}, >>> + {US5182D_REG_CFG3, US5182D_REG_CFG3_DEFAULT}, >>> + {US5182D_REG_MODE_STORE, US5182D_STORE_MODE}, >>> + {US5182D_REG_CFG4, US5182D_REG_CFG4_DEFAULT}, >>> +}; >>> + >>> +static const struct iio_chan_spec us5182d_channels[] = { >>> + { >>> + .type = IIO_LIGHT, >>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | >>> + BIT(IIO_CHAN_INFO_SCALE), >>> + }, >>> + { >>> + .type = IIO_PROXIMITY, >>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), >>> + } >>> +}; >>> + >>> +static int us5182d_get_als(struct us5182d_data *data) >>> +{ >>> + int ret; >>> + unsigned long result; >>> + >>> + ret = i2c_smbus_read_word_data(data->client, >>> + US5182D_REG_ADL); >>> + if (ret < 0) >>> + return ret; >>> + >>> + result = ret * data->ga / US5182D_GA_RESOLUTION; >>> + if (result > 0xffff) >>> + result = 0xffff; >>> + >>> + return result; >>> +} >>> + >>> +static int us5182d_set_opmode(struct us5182d_data *data, u8 mode) >>> +{ >>> + int ret; >>> + >>> + ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CFG0); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = ret | US5182D_ONESHOT_EN; >>> + >>> + /* update mode */ >>> + ret = ret & ~US5182D_OPMODE_MASK; >>> + ret = ret | (mode << US5182D_OPMODE_SHIFT); >>> + >>> + ret = i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG0, >ret); >>> + if (ret < 0) >>> + return ret; >>> + >>> + if (mode == data->opmode) >>> + return 0; >>> + >>> + data->opmode = mode; >>> + ret = i2c_smbus_write_byte_data(data->client, >US5182D_REG_MODE_STORE, >>> + US5182D_STORE_MODE); >> This is a lock / commit register? If so what is happening here is a >little >> bit quirky and a brief comment to explain would be good. >I'm sorry, I am not familiar with that terminology, so i'm not sure if >that qualifies, the data sheet simply instructs that after a new opmode I probably made the terms up :) Anyhow it is whatever I meant! > >is set - we should additionally write 1 in the mode storage register. >I'll add a comment nonetheless. >> >>> + if (ret < 0) >>> + return ret; >> blank line here would make it a touch more readable (don't be afraid >> to add white space in moderation!) >>> + msleep(US5182D_OPSTORE_SLEEP_TIME); >>> + >>> + return 0; >>> +} >>> + >>> +static int us5182d_read_raw(struct iio_dev *indio_dev, >>> + struct iio_chan_spec const *chan, int *val, >>> + int *val2, long mask) >>> +{ >>> + struct us5182d_data *data = iio_priv(indio_dev); >>> + int ret; >>> + >>> + switch (mask) { >>> + case IIO_CHAN_INFO_RAW: >>> + switch (chan->type) { >>> + case IIO_LIGHT: >>> + mutex_lock(&data->lock); >>> + ret = us5182d_set_opmode(data, US5182D_OPMODE_ALS); >>> + if (ret < 0) >>> + goto out_err; >>> + >>> + ret = us5182d_get_als(data); >>> + if (ret < 0) >>> + goto out_err; >>> + mutex_unlock(&data->lock); >>> + *val = ret; >>> + return IIO_VAL_INT; >>> + case IIO_PROXIMITY: >>> + mutex_lock(&data->lock); >>> + ret = us5182d_set_opmode(data, US5182D_OPMODE_PX); >>> + if (ret < 0) >>> + goto out_err; >>> + >>> + ret = i2c_smbus_read_word_data(data->client, >>> + US5182D_REG_PDL); >>> + if (ret < 0) >>> + goto out_err; >>> + mutex_unlock(&data->lock); >>> + *val = ret; >>> + return IIO_VAL_INT; >>> + default: >>> + return -EINVAL; >>> + } >>> + >>> + case IIO_CHAN_INFO_SCALE: >>> + ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CFG1); >>> + if (ret < 0) >>> + return ret; >> I'd add a blank line here to aid readability (nitpick) >>> + *val = 0; >>> + ret = (ret & US5182D_AGAIN_MASK); >>> + *val2 = us5182d_scales[ret]; >> Maybe roll the two lines above into one? >> Blank line here also nice for readability and in equivalent places. >>> + return IIO_VAL_INT_PLUS_MICRO; >>> + default: >>> + return -EINVAL; >>> + } >>> + >>> + return -EINVAL; >>> +out_err: >>> + mutex_unlock(&data->lock); >>> + return ret; >>> +} >>> + >>> +static int us5182d_update_dark_th(struct us5182d_data *data, int >index) >>> +{ >>> + __be16 dark_th = cpu_to_be16(data->us5182d_dark_ths[index]); >>> + u8 *bytes = (u8 *)&dark_th; >> Cast it at use site rather than here. >> >>> + int ret; >>> + >>> + /* Registers Dark_Th (0x27 0x28) don't work in word mode accessing >*/ >>> + ret = i2c_smbus_write_byte_data(data->client, >US5182D_REG_UDARK_TH, >>> + bytes[0]); >>> + if (ret < 0) >>> + return ret; >>> + >>> + return i2c_smbus_write_byte_data(data->client, >US5182D_REG_UDARK_TH + 1, >>> + bytes[1]); >>> +} >>> + >>> +static int us5182d_apply_scale(struct us5182d_data *data, int >index) >>> +{ >>> + int ret; >>> + >>> + ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CFG1); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = ret & (~US5182D_AGAIN_MASK); >>> + ret |= index; >>> + >>> + ret = i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG1, >ret); >>> + if (ret < 0) >>> + return ret; >>> + >>> + return us5182d_update_dark_th(data, index); >>> +} >>> + >>> +static int us5182d_write_raw(struct iio_dev *indio_dev, >>> + struct iio_chan_spec const *chan, int val, >>> + int val2, long mask) >>> +{ >>> + struct us5182d_data *data = iio_priv(indio_dev); >>> + int ret, i; >>> + >>> + switch (mask) { >>> + case IIO_CHAN_INFO_SCALE: >>> + if (val != 0) >>> + return -EINVAL; >>> + for (i = 0; i < ARRAY_SIZE(us5182d_scales); i++) >>> + if (val2 == us5182d_scales[i]) { >>> + mutex_lock(&data->lock); >>> + ret = us5182d_apply_scale(data, i); >> >> I'd be tempted to move the lock into apply_scale... Otherwise, you >> should add kernel-doc to that function to specify the lock should be >held. >> (I think given the calls out to update_dark_th in there, I'd be >tempted >> to just document the need for both those funcs to be called with the >> lock held). >>> + mutex_unlock(&data->lock); >>> + return ret; >>> + } >>> + break; >>> + default: >>> + return -EINVAL; >>> + } >>> + >>> + return -EINVAL; >>> +} >>> + >>> +static const struct iio_info us5182d_info = { >>> + .driver_module = THIS_MODULE, >>> + .read_raw = us5182d_read_raw, >>> + .write_raw = us5182d_write_raw, >>> + .attrs = &us5182d_attr_group, >>> +}; >>> + >>> +static int us5182d_reset(struct iio_dev *indio_dev) >>> +{ >>> + struct us5182d_data *data = iio_priv(indio_dev); >>> + >>> + return i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG3, >>> + US5182D_RESET_CHIP); >>> +} >>> + >>> +static int us5182d_init(struct iio_dev *indio_dev) >>> +{ >>> + struct us5182d_data *data = iio_priv(indio_dev); >>> + int i, ret; >>> + >>> + ret = us5182d_reset(indio_dev); >>> + if (ret < 0) >>> + return ret; >>> + >>> + data->opmode = 0; >>> + for (i = 0; i < ARRAY_SIZE(us5182d_regvals); i++) { >>> + ret = i2c_smbus_write_byte_data(data->client, >>> + us5182d_regvals[i].reg, >>> + us5182d_regvals[i].val); >>> + if (ret < 0) >>> + return ret; >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +static void us5182d_get_platform_data(struct iio_dev *indio_dev) >>> +{ >>> + struct us5182d_data *data = iio_priv(indio_dev); >>> + >>> + if (device_property_read_u32(&data->client->dev, >"upisemi,glass-coef", >>> + &data->ga)) >>> + data->ga = US5182D_GA_RESOLUTION; >>> + if (device_property_read_u16_array(&data->client->dev, >>> + "upisemi,dark-ths", >>> + data->us5182d_dark_ths, >>> + ARRAY_SIZE(us5182d_dark_ths_vals))) >>> + data->us5182d_dark_ths = us5182d_dark_ths_vals; >>> + if (device_property_read_u8(&data->client->dev, >>> + "upisemi,upper-dark-gain", >>> + &data->upper_dark_gain)) >>> + data->upper_dark_gain = US5182D_REG_AUTO_HDARK_GAIN_DEFAULT; >>> + if (device_property_read_u8(&data->client->dev, >>> + "upisemi,lower-dark-gain", >>> + &data->lower_dark_gain)) >>> + data->lower_dark_gain = US5182D_REG_AUTO_LDARK_GAIN_DEFAULT; >>> +} >>> + >>> +static int us5182d_dark_gain_config(struct iio_dev *indio_dev) >>> +{ >>> + struct us5182d_data *data = iio_priv(indio_dev); >>> + u8 index = US5182D_REG_CFG1_DEFAULT & US5182D_AGAIN_MASK; >>> + int ret; >>> + >>> + ret = us5182d_update_dark_th(data, index); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = i2c_smbus_write_byte_data(data->client, >>> + US5182D_REG_AUTO_LDARK_GAIN, >>> + data->lower_dark_gain); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = i2c_smbus_write_byte_data(data->client, >>> + US5182D_REG_AUTO_HDARK_GAIN, >>> + data->upper_dark_gain); >>> + if (ret < 0) >>> + return ret; >>> + >>> + return i2c_smbus_write_byte_data(data->client, >US5182D_REG_DARK_AUTO_EN, >>> + US5182D_REG_DARK_AUTO_EN_DEFAULT); >>> +} >>> + >>> +static int us5182d_probe(struct i2c_client *client, >>> + const struct i2c_device_id *id) >>> +{ >>> + struct us5182d_data *data; >>> + struct iio_dev *indio_dev; >>> + int ret; >>> + >>> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); >>> + if (!indio_dev) >>> + return -ENOMEM; >>> + >>> + data = iio_priv(indio_dev); >>> + i2c_set_clientdata(client, indio_dev); >>> + data->client = client; >>> + >>> + mutex_init(&data->lock); >>> + >>> + indio_dev->dev.parent = &client->dev; >>> + indio_dev->info = &us5182d_info; >>> + indio_dev->name = US5182D_DRV_NAME; >>> + indio_dev->channels = us5182d_channels; >>> + indio_dev->num_channels = ARRAY_SIZE(us5182d_channels); >>> + indio_dev->modes = INDIO_DIRECT_MODE; >>> + >>> + ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CHIPID); >>> + if (ret != US5182D_CHIPID) { >>> + dev_err(&data->client->dev, >>> + "Failed to detect US5182 light chip\n"); >>> + return (ret < 0) ? ret : -ENODEV; >>> + } >>> + >>> + us5182d_get_platform_data(indio_dev); >>> + ret = us5182d_init(indio_dev); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = us5182d_dark_gain_config(indio_dev); >>> + if (ret < 0) >>> + return ret; >>> + >>> + return iio_device_register(indio_dev); >>> +} >>> + >>> +static int us5182d_remove(struct i2c_client *client) >>> +{ >>> + iio_device_unregister(i2c_get_clientdata(client)); >>> + return i2c_smbus_write_byte_data(client, US5182D_REG_CFG0, >>> + US5182D_REG_CFG0_DEFAULT); >> Nitpick :) >> I'd be tempted here (as we are shutting down and it doesn't matter >anyway) >> to use just the SHUTDOWN_EN value as then it's immediately obvious >> what you are doing here. >would look nicer >> >>> +} >>> + >>> +static const struct acpi_device_id us5182d_acpi_match[] = { >>> + { "USD5182", 0}, >>> + {} >>> +}; >>> + >>> +MODULE_DEVICE_TABLE(acpi, us5182d_acpi_match); >>> + >>> +static const struct i2c_device_id us5182d_id[] = { >>> + {"usd5182", 0}, >>> + {} >>> +}; >>> + >>> +MODULE_DEVICE_TABLE(i2c, us5182d_id); >>> + >>> +static struct i2c_driver us5182d_driver = { >>> + .driver = { >>> + .name = US5182D_DRV_NAME, >>> + .acpi_match_table = ACPI_PTR(us5182d_acpi_match), >>> + }, >>> + .probe = us5182d_probe, >>> + .remove = us5182d_remove, >>> + .id_table = us5182d_id, >>> + >>> +}; >>> +module_i2c_driver(us5182d_driver); >>> + >>> +MODULE_AUTHOR("Adriana Reus <adriana.reus@xxxxxxxxx>"); >>> +MODULE_DESCRIPTION("Driver for us5182d Proximity and Light >Sensor"); >>> +MODULE_LICENSE("GPL v2"); >>> >> >-- >To unsubscribe from this list: send the line "unsubscribe linux-iio" in >the body of a message to majordomo@xxxxxxxxxxxxxxx >More majordomo info at http://vger.kernel.org/majordomo-info.html -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
