Thank you Jonathan, I'll add a new patch set soon, added some comments
inline also.
Adriana
On 15.08.2015 17:31, Jonathan Cameron wrote:
On 14/08/15 10:29, Adriana Reus wrote:
Added entries in trivial-devices and i2c/vendor-prefixes for
the us5182d als and proximity sensor. Also added a documentation file for
this sensor's properties.
Signed-off-by: Adriana Reus <adriana.reus@xxxxxxxxx>
It's not a trivial device if it has it's own docs. So don't add it to that list
(the point is to not have separate docs for devices that don't really have
any device tree data other than where they are.
right, I'll add a new path set soon.
Few more bits inline.
---
No changes - resending because I forgot to cc devicetree.
.../devicetree/bindings/i2c/trivial-devices.txt | 1 +
.../devicetree/bindings/iio/light/us5182d.txt | 24 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
3 files changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/light/us5182d.txt
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 00f8652..96d3b9c 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -99,4 +99,5 @@ ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
ti,tmp275 Digital Temperature Sensor
+upisemi,usd5182 Als and Proximity Sensor
winbond,wpct301 i2c trusted platform module (TPM)
diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt
new file mode 100644
index 0000000..9ac3336
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt
@@ -0,0 +1,24 @@
+* UPISEMI us5182d I2C ALS and Proximity sensor
+
+Required properties:
+- compatible: must be "upisemi,usd5182"
+- reg: the I2C address of the device
+
+Optional properties:
+- upisemi,glass-coef: glass attenuation factor
+- upisemi,dark-ths: array of thresholds corresponding to every scale
That needs more detail. I've read the driver and I am not sure what exactly
you mean! Why should a scale have a threshold?
I'll try to be more specific. These are values representing adc counts,
that's why there are different values corresponding to every scale.
+- upisemi,upper-dark-gain: tuning factor applied when light > th
+- upisemi,lower-dark-gain: tuning factor applied when light < th
+
+Example:
+
+ usd5182@39 {
+ compatible = "upisemi,usd5182";
+ reg = <0x39>;
+ upisemi,glass-coef = < 1000 >;
+ upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
+ upisemi,upper-dark-gain = /bits/ 8 <0x00>;
+ upisemi,lower-dark-gain = /bits/ 8 <0x16>;
Not sure why these are in hex.. Or why we care if they are 8 bits. If there is a limit
on the possible values, perhaps mention it in the docs above.
I should have been (much) more specific here: that represents a float
number with 4 integer bits and 4 fractional bits (Q4.4), so I find hex
more intuitive since it's split in half, let me know if you think
otherwise. I'll add a more complete description. As for the "/bits/ x"
it's because currently in the driver I use the read_property_u8 or *_u16
functions, these require that the dts entry be as I wrote it in the
example, and since it's an example it should be functional, so I feel
that is ok as it is.
+ };
+
One blank line at the end is neough.
+
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d444757..5b40bab 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -211,6 +211,7 @@ toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
truly Truly Semiconductors Limited
+upisemi uPI Semiconductor Corp.
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
variscite Variscite Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
