On 04/08/15 15:04, Irina Tirdea wrote:
> There are devices that need to handle block transactions
> regardless of the capabilities exported by the adapter.
> For performance reasons, they need to use i2c read blocks
> if available, otherwise emulate the block transaction with word
> or byte transactions.
>
> Add support for a helper function that would read a data block
> using the best transfer available: I2C_FUNC_SMBUS_READ_I2C_BLOCK,
> I2C_FUNC_SMBUS_READ_WORD_DATA or I2C_FUNC_SMBUS_READ_BYTE_DATA.
>
> Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
I like this a lot.
Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> ---
> drivers/i2c/i2c-core.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/i2c.h | 3 +++
> 2 files changed, 68 insertions(+)
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index c83e4d1..79ba6a8 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -2942,6 +2942,71 @@ trace:
> }
> EXPORT_SYMBOL(i2c_smbus_xfer);
>
> +/**
> + * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
> + * @client: Handle to slave device
> + * @command: Byte interpreted by slave
> + * @length: Size of data block; SMBus allows at most 32 bytes
> + * @values: Byte array into which data will be read; big enough to hold
> + * the data returned by the slave. SMBus allows at most 32 bytes.
> + *
> + * This executes the SMBus "block read" protocol if supported by the adapter.
> + * If block read is not supported, it emulates it using either word or byte
> + * read protocols depending on availability.
> + *
> + * The addresses of the I2C slave device that are accessed with this function
> + * must be mapped to a linear region, so that a block read will have the same
> + * effect as a byte read. Before using this function you must double-check
> + * if the I2C slave does support exchanging a block transfer with a byte
> + * transfer.
> + */
> +s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
> + u8 command, u8 length, u8 *values)
> +{
> + u8 i;
> + int status;
> +
> + if (length > I2C_SMBUS_BLOCK_MAX)
> + length = I2C_SMBUS_BLOCK_MAX;
> +
> + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
> + return i2c_smbus_read_i2c_block_data(client, command, length, values);
> +
> + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA |
> + I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
> + for (i = 0; (i + 2) <= length; i += 2) {
> + status = i2c_smbus_read_word_data(client, command + i);
> + if (status < 0)
> + return status;
> + values[i] = status & 0xff;
> + values[i + 1] = status >> 8;
I was about to suggest we knew we were word aligned for both elements and hence could
use an endian conversion, but I guess we don't know that as values might not be word
aligned. Hence what you have is the best we can do!
> + }
> + if (i < length) {
> + status = i2c_smbus_read_byte_data(client, command + i);
> + if (status < 0)
> + return status;
> + values[i] = status;
> + i++;
> + }
> + return i;
> + }
> +
> + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
> + for (i = 0; i < length; i++) {
> + status = i2c_smbus_read_byte_data(client, command + i);
> + if (status < 0)
> + return status;
> + values[i] = status;
> + }
> + return i;
> + }
> +
> + dev_err(&client->adapter->dev, "Unsupported transactions\n");
> +
> + return -EOPNOTSUPP;
> +}
> +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
> +
> #if IS_ENABLED(CONFIG_I2C_SLAVE)
> int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
> {
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index e83a738..faf518d 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -121,6 +121,9 @@ extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
> extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
> u8 command, u8 length,
> const u8 *values);
> +extern s32
> +i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
> + u8 command, u8 length, u8 *values);
> #endif /* I2C */
>
> /**
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
