Re: [PATCH 2/3] iio: temperature: add max6675 thermocouple converter driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 3, 2015 at 1:56 PM, Matt Porter <mporter@xxxxxxxxxxxx> wrote:
> Add a driver for the MAX6675 thermocouple converter. This
> device interfaces with K-type thermocouples and provides
> cold-junction compensated temperature readings via a
> SPI interface.
>
> Signed-off-by: Matt Porter <mporter@xxxxxxxxxxxx>
> ---
>  drivers/iio/temperature/Kconfig   |  11 +++
>  drivers/iio/temperature/Makefile  |   1 +
>  drivers/iio/temperature/max6675.c | 155 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 167 insertions(+)
>  create mode 100644 drivers/iio/temperature/max6675.c
>
> diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
> index 21feaa4..b73fbf4 100644
> --- a/drivers/iio/temperature/Kconfig
> +++ b/drivers/iio/temperature/Kconfig
> @@ -3,6 +3,17 @@
>  #
>  menu "Temperature sensors"
>
> +config MAX6675
> +       tristate "MAX6675 thermocouple converter"
> +       depends on SPI
> +       help
> +         If you say yes here you get support for the Maxim
> +         MAX6675 thermocouple converter connected with SPI.
> +
> +         This driver can also be built as a module. If so, the module will
> +         be called max6675.
> +
> +
>  config MLX90614
>         tristate "MLX90614 contact-less infrared sensor"
>         depends on I2C
> diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
> index 40710a8..d67ef40 100644
> --- a/drivers/iio/temperature/Makefile
> +++ b/drivers/iio/temperature/Makefile
> @@ -2,5 +2,6 @@
>  # Makefile for industrial I/O temperature drivers
>  #
>
> +obj-$(CONFIG_MAX6675) += max6675.o
>  obj-$(CONFIG_MLX90614) += mlx90614.o
>  obj-$(CONFIG_TMP006) += tmp006.o
> diff --git a/drivers/iio/temperature/max6675.c b/drivers/iio/temperature/max6675.c
> new file mode 100644
> index 0000000..2d1fda2
> --- /dev/null
> +++ b/drivers/iio/temperature/max6675.c
> @@ -0,0 +1,155 @@
> +/*
> + * max6675.c - MAX6675 thermocouple converter driver
> + *
> + * Copyright (C) 2015 Konsulko Group, Matt Porter <mporter@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/iio/iio.h>
> +#include <linux/spi/spi.h>
> +
> +struct max6675_state {
> +       struct spi_device *spi;
> +};
> +
> +static const struct iio_chan_spec max6675_channels[] = {
> +       {
> +               .type = IIO_TEMP,
> +               .info_mask_separate =
> +                       BIT(IIO_CHAN_INFO_RAW) |
> +                       BIT(IIO_CHAN_INFO_SCALE),
> +       },
> +};
> +
> +static int max6675_read(struct max6675_state *st, int *val)
> +{
> +       int ret;
> +
> +       ret = spi_read(st->spi, val, 2);
> +       if (ret < 0)
> +               return ret;
> +
> +       /* Temperature is bits 14..3 */
> +       *val = (*val >> 3) & 0xfff;
> +
> +       return ret;
> +}
> +
> +static int max6675_read_raw(struct iio_dev *indio_dev,
> +                           struct iio_chan_spec const *chan,
> +                           int *val,
> +                           int *val2,
> +                           long m)
> +{
> +       struct max6675_state *st = iio_priv(indio_dev);
> +       int ret;
> +
> +       if (m == IIO_CHAN_INFO_RAW) {
> +               *val2 = 0;
> +               ret = max6675_read(st, val);
> +               if (ret)
> +                       return ret;
> +       } else if (m == IIO_CHAN_INFO_SCALE) {
> +               *val = 250;
> +               *val2 = 0;
> +       } else
> +               return -EINVAL;
> +
> +       return IIO_VAL_INT;
> +}
> +
> +static const struct iio_info max6675_info = {
> +       .driver_module = THIS_MODULE,
> +       .read_raw = &max6675_read_raw,
> +};
> +
> +static int max6675_probe(struct spi_device *spi)
> +{
> +       struct iio_dev *indio_dev;
> +       struct max6675_state *st;
> +       int ret = 0;
> +
> +       indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> +       if (!indio_dev)
> +               return -ENOMEM;
> +
> +       st = iio_priv(indio_dev);
> +       st->spi = spi;
> +
> +       spi->mode = SPI_MODE_1;
> +       spi->bits_per_word = 16;

Have this error or display a warning when it doesn't match the passed
DT binding settings. Otherwise it may get confusing why other SPI
modes and word sizes don't work.

> +
> +       spi_set_drvdata(spi, indio_dev);
> +
> +       indio_dev->dev.parent = &spi->dev;
> +       indio_dev->name = spi_get_device_id(spi)->name;
> +       indio_dev->channels = max6675_channels;
> +       indio_dev->num_channels = ARRAY_SIZE(max6675_channels);
> +       indio_dev->modes = INDIO_DIRECT_MODE;
> +       indio_dev->info = &max6675_info;
> +
> +       ret = iio_device_register(indio_dev);
> +       if (ret < 0)
> +               dev_err(&spi->dev, "unable to register device\n");
> +
> +       return ret;
> +}
> +
> +static int max6675_remove(struct spi_device *spi)
> +{
> +       struct iio_dev *indio_dev = spi_get_drvdata(spi);
> +
> +       iio_device_unregister(indio_dev);
> +
> +       return 0;
> +}
> +
> +static const struct acpi_device_id max6675_acpi_ids[] = {
> +       { "MXIM6675", 0 },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(acpi, max6675_acpi_ids);
> +
> +static const struct of_device_id max6675_dt_ids[] = {
> +       { .compatible = "maxim,max6675" },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, max6675_dt_ids);
> +
> +static const struct spi_device_id max6675_spi_ids[] = {
> +       {"max6675", 0},
> +       {},
> +};
> +MODULE_DEVICE_TABLE(spi, max6675_spi_ids);
> +
> +static struct spi_driver max6675_driver = {
> +       .driver = {
> +               .name   = "max6675",
> +               .owner  = THIS_MODULE,
> +               .acpi_match_table = ACPI_PTR(max6675_acpi_ids),
> +               .of_match_table = of_match_ptr(max6675_dt_ids),
> +       },
> +       .probe          = max6675_probe,
> +       .remove         = max6675_remove,
> +       .id_table       = max6675_spi_ids,
> +};
> +module_spi_driver(max6675_driver);
> +
> +MODULE_AUTHOR("Matt Porter <mporter@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("MAX6675 thermocouple converter driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("spi:max6675");
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux