[PATCH 2/8] iio: mma8452: add support for MMA8453Q accelerometer chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds support for the 10 bit version if Freescale's accelerometers
of this series. The datasheet is available at Freescale's website:

http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf

Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Christoph Muellner <christoph.muellner@xxxxxxxxxxxxxxxxxxxxx>
---
 drivers/iio/accel/Kconfig   |  6 +++---
 drivers/iio/accel/mma8452.c | 38 +++++++++++++++++++++++++++++++++++---
 2 files changed, 38 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 00e7bcb..dc80dc9 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -87,13 +87,13 @@ config KXSD9
 	  will be called kxsd9.
 
 config MMA8452
-	tristate "Freescale MMA8452Q Accelerometer Driver"
+	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for the Freescale MMA8452Q 3-axis
-	  accelerometer.
+	  Say yes here to build support for the following Freescale 3-axis
+	  accelerometers: MMA8452Q, MMA8453Q.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 8965517..57b12eb 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1,5 +1,8 @@
 /*
- * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer
+ * mma8452.c - Support for following Freescale 3-axis accelerometers:
+ *
+ *	MMA8452Q
+ *	MMA8453Q
  *
  * Copyright 2014 Peter Meerwald <pmeerw@xxxxxxxxxx>
  *
@@ -26,7 +29,7 @@
 #include <linux/of_device.h>
 
 #define MMA8452_STATUS 0x00
-#define MMA8452_OUT_X 0x01 /* MSB first, 12-bit  */
+#define MMA8452_OUT_X 0x01 /* MSB first, 10 or 12-bit  */
 #define MMA8452_OUT_Y 0x03
 #define MMA8452_OUT_Z 0x05
 #define MMA8452_INT_SRC 0x0c
@@ -73,6 +76,7 @@
 #define MMA8452_INT_TRANS	BIT(5)
 
 #define MMA8452_DEVICE_ID 0x2a
+#define MMA8453_DEVICE_ID 0x3a
 
 struct mma8452_data {
 	struct i2c_client *client;
@@ -744,8 +748,16 @@ static const struct iio_chan_spec mma8452_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec mma8453_channels[] = {
+	MMA8452_CHANNEL(X, 0, 10),
+	MMA8452_CHANNEL(Y, 1, 10),
+	MMA8452_CHANNEL(Z, 2, 10),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 enum {
 	mma8452,
+	mma8453,
 };
 
 static const struct mma_chip_info mma_chip_info_table[] = {
@@ -772,7 +784,24 @@ static const struct mma_chip_info mma_chip_info_table[] = {
 		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
 		.ev_count = MMA8452_TRANSIENT_COUNT,
 	},
+	[mma8453] = {
+		.chip_id = MMA8453_DEVICE_ID,
+		.channels = mma8453_channels,
+		.num_channels = ARRAY_SIZE(mma8453_channels),
+		.mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
+		.ev_cfg = MMA8452_TRANSIENT_CFG,
+		.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
+		.ev_cfg_chan_shift = 1,
+		.ev_src = MMA8452_TRANSIENT_SRC,
+		.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
+		.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
+		.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
+		.ev_ths = MMA8452_TRANSIENT_THS,
+		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
+		.ev_count = MMA8452_TRANSIENT_COUNT,
+	},
 };
+
 static struct attribute *mma8452_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
@@ -891,6 +920,7 @@ static int mma8452_reset(struct i2c_client *client)
 
 static const struct of_device_id mma8452_dt_ids[] = {
 	{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
+	{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
 	{ }
 };
 
@@ -905,7 +935,8 @@ static int mma8452_probe(struct i2c_client *client,
 	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
 	if (ret < 0)
 		return ret;
-	if (ret != MMA8452_DEVICE_ID)
+
+	if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID)
 		return -ENODEV;
 
 	match = of_match_device(mma8452_dt_ids, &client->dev);
@@ -1052,6 +1083,7 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
 
 static const struct i2c_device_id mma8452_id[] = {
 	{ "mma8452", mma8452 },
+	{ "mma8453", mma8453 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mma8452_id);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux