[PATCH 1/8] iio:adc:berlin2-adc: Fix register definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Active channel number is stored in BERLIN2_SM_CTRL as value, instead of a
bit map.
The masks for channel interrupts and data ready are a 16 bits wide bit
map each, instead of just 4 bits.

Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx>
---
Driver analysis indicates that only one ADC channel can be sampled at a
time, and this channel number is stored in BERLIN2_SM_CTRL as a value,
instead of a bit map.
In register BERLIN2_SM_ADC_STATUS however, interrupts can be enabled for
each ADC channel, and data ready is indicated for each ADC channel,
too - in both cases as a bit map. Since there are 8 channels available,
both masks should be at least 8 bits wide. But as the comment indicates,
there are 16 bits for each mask.

 drivers/iio/adc/berlin2-adc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/berlin2-adc.c b/drivers/iio/adc/berlin2-adc.c
index aecc9ad995ad..97863d1ba79a 100644
--- a/drivers/iio/adc/berlin2-adc.c
+++ b/drivers/iio/adc/berlin2-adc.c
@@ -26,7 +26,7 @@
 #define BERLIN2_SM_CTRL				0x14
 #define  BERLIN2_SM_CTRL_SM_SOC_INT		BIT(1)
 #define  BERLIN2_SM_CTRL_SOC_SM_INT		BIT(2)
-#define  BERLIN2_SM_CTRL_ADC_SEL(x)		(BIT(x) << 5)	/* 0-15 */
+#define  BERLIN2_SM_CTRL_ADC_SEL(x)		((x) << 5)	/* 0-15 */
 #define  BERLIN2_SM_CTRL_ADC_SEL_MASK		(0xf << 5)
 #define  BERLIN2_SM_CTRL_ADC_POWER		BIT(9)
 #define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV2	(0x0 << 10)
@@ -53,9 +53,9 @@
 #define  BERLIN2_SM_ADC_MASK			0x3ff
 #define BERLIN2_SM_ADC_STATUS			0x1c
 #define  BERLIN2_SM_ADC_STATUS_DATA_RDY(x)	BIT(x)		/* 0-15 */
-#define  BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK	0xf
+#define  BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK	GENMASK(15, 0)
 #define  BERLIN2_SM_ADC_STATUS_INT_EN(x)	(BIT(x) << 16)	/* 0-15 */
-#define  BERLIN2_SM_ADC_STATUS_INT_EN_MASK	(0xf << 16)
+#define  BERLIN2_SM_ADC_STATUS_INT_EN_MASK	GENMASK(31, 16)
 #define BERLIN2_SM_TSEN_STATUS			0x24
 #define  BERLIN2_SM_TSEN_STATUS_DATA_RDY	BIT(0)
 #define  BERLIN2_SM_TSEN_STATUS_INT_EN		BIT(1)
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux