Hello Peter,
Just sent up the V3 of my patch. Register configuration is now done in
madc driver code.
Another difference from V2 and V1 is that I am using
`devm_regulator_put` instead of
`regulator_put` to match the `devm_regulator_get` call.
I've tested it on Gumstix Overo (OMAP3 + TPS65950).
Let me know,
Adam
On Mon, Jul 20, 2015 at 5:49 PM, Adam YH Lee <adam.yh.lee@xxxxxxxxx> wrote:
> MADC[3:6] reads incorrect values without these two following changes:
>
> - enable the 3v1 bias regulator for ADC[3:6]
> - configure ADC[3:6] lines as input, not as USB
>
> Signed-off-by: Adam YH Lee <adam.yh.lee@xxxxxxxxx>
> ---
> drivers/iio/adc/twl4030-madc.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
> index 94c5f05..ae33eba 100644
> --- a/drivers/iio/adc/twl4030-madc.c
> +++ b/drivers/iio/adc/twl4030-madc.c
> @@ -45,13 +45,18 @@
> #include <linux/types.h>
> #include <linux/gfp.h>
> #include <linux/err.h>
> +#include <linux/regulator/consumer.h>
>
> #include <linux/iio/iio.h>
>
> +#define TWL4030_USB_SEL_MADC_MCPC (1<<3)
> +#define TWL4030_USB_CARKIT_ANA_CTRL 0xBB
> +
> /**
> * struct twl4030_madc_data - a container for madc info
> * @dev: Pointer to device structure for madc
> * @lock: Mutex protecting this data structure
> + * @regulator: Pointer to bias regulator for madc
> * @requests: Array of request struct corresponding to SW1, SW2 and RT
> * @use_second_irq: IRQ selection (main or co-processor)
> * @imr: Interrupt mask register of MADC
> @@ -60,6 +65,7 @@
> struct twl4030_madc_data {
> struct device *dev;
> struct mutex lock; /* mutex protecting this data structure */
> + struct regulator *usb3v1;
> struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
> bool use_second_irq;
> u8 imr;
> @@ -848,6 +854,33 @@ static int twl4030_madc_probe(struct platform_device *pdev)
> goto err_i2c;
> }
>
> + /* Configure MADC[3:6] */
> + ret = twl_i2c_read_u8(TWL_MODULE_USB, ®val,
> + TWL4030_USB_CARKIT_ANA_CTRL);
> + if (ret) {
> + dev_err(&pdev->dev, "unable to read reg CARKIT_ANA_CTRL 0x%X\n",
> + TWL4030_USB_CARKIT_ANA_CTRL);
> + goto err_i2c;
> + }
> + regval |= TWL4030_USB_SEL_MADC_MCPC;
> + ret = twl_i2c_write_u8(TWL_MODULE_USB, regval,
> + TWL4030_USB_CARKIT_ANA_CTRL);
> + if (ret) {
> + dev_err(&pdev->dev, "unable to write reg CARKIT_ANA_CTRL 0x%X\n",
> + TWL4030_USB_CARKIT_ANA_CTRL);
> + goto err_i2c;
> + }
> +
> +
> + /* Enable 3v1 bias regulator for MADC[3:6] */
> + madc->usb3v1 = devm_regulator_get(madc->dev, "vusb3v1");
> + if (IS_ERR(madc->usb3v1))
> + return -ENODEV;
> +
> + ret = regulator_enable(madc->usb3v1);
> + if (ret)
> + dev_err(madc->dev, "could not enable 3v1 bias regulator\n");
> +
> return 0;
>
> err_i2c:
> @@ -867,6 +900,9 @@ static int twl4030_madc_remove(struct platform_device *pdev)
> twl4030_madc_set_current_generator(madc, 0, 0);
> twl4030_madc_set_power(madc, 0);
>
> + regulator_disable(madc->usb3v1);
> + devm_regulator_put(madc->usb3v1);
> +
> return 0;
> }
>
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
