This patch permits to configure the WhoAmI register address
because some device could have not a standard address for
this register.
Signed-off-by: Giuseppe Barba <giuseppe.barba@xxxxxx>
---
drivers/iio/accel/st_accel_core.c | 5 ++++
drivers/iio/common/st_sensors/st_sensors_core.c | 37 +++++++++++++------------
drivers/iio/gyro/st_gyro_core.c | 3 ++
drivers/iio/magnetometer/st_magn_core.c | 3 ++
drivers/iio/pressure/st_pressure_core.c | 3 ++
include/linux/iio/common/st_sensors.h | 2 ++
6 files changed, 35 insertions(+), 18 deletions(-)
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 4002e64..12b42f6 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -226,6 +226,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
static const struct st_sensor_settings st_accel_sensors_settings[] = {
{
.wai = ST_ACCEL_1_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3DH_ACCEL_DEV_NAME,
[1] = LSM303DLHC_ACCEL_DEV_NAME,
@@ -297,6 +298,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
},
{
.wai = ST_ACCEL_2_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS331DLH_ACCEL_DEV_NAME,
[1] = LSM303DL_ACCEL_DEV_NAME,
@@ -359,6 +361,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
},
{
.wai = ST_ACCEL_3_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM330_ACCEL_DEV_NAME,
},
@@ -437,6 +440,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
},
{
.wai = ST_ACCEL_4_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3LV02DL_ACCEL_DEV_NAME,
},
@@ -494,6 +498,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
},
{
.wai = ST_ACCEL_5_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS331DL_ACCEL_DEV_NAME,
},
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 8086cbc..6323d32 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -479,35 +479,36 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
int num_sensors_list,
const struct st_sensor_settings *sensor_settings)
{
- u8 wai;
int i, n, err;
+ u8 wai;
struct st_sensor_data *sdata = iio_priv(indio_dev);
+ for (i = 0; i < num_sensors_list; i++) {
+ for (n = 0; n < ST_SENSORS_MAX_4WAI; n++) {
+ if (strcmp(indio_dev->name,
+ sensor_settings[i].sensors_supported[n]) == 0) {
+ break;
+ }
+ }
+ if (n < ST_SENSORS_MAX_4WAI)
+ break;
+ }
+ if (i == num_sensors_list) {
+ dev_err(&indio_dev->dev, "device name %s not recognized.\n",
+ indio_dev->name);
+ goto sensor_name_mismatch;
+ }
+
err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
- ST_SENSORS_DEFAULT_WAI_ADDRESS, &wai);
+ sensor_settings[i].wai_addr, &wai);
if (err < 0) {
dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n");
goto read_wai_error;
}
- for (i = 0; i < num_sensors_list; i++) {
- if (sensor_settings[i].wai == wai)
- break;
- }
- if (i == num_sensors_list)
+ if (sensor_settings[i].wai != wai)
goto device_not_supported;
- for (n = 0; n < ARRAY_SIZE(sensor_settings[i].sensors_supported); n++) {
- if (strcmp(indio_dev->name,
- &sensor_settings[i].sensors_supported[n][0]) == 0)
- break;
- }
- if (n == ARRAY_SIZE(sensor_settings[i].sensors_supported)) {
- dev_err(&indio_dev->dev, "device name \"%s\" and WhoAmI (0x%02x) mismatch",
- indio_dev->name, wai);
- goto sensor_name_mismatch;
- }
-
sdata->sensor_settings =
(struct st_sensor_settings *)&sensor_settings[i];
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index ffe9664..4b993a5 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -131,6 +131,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {
static const struct st_sensor_settings st_gyro_sensors_settings[] = {
{
.wai = ST_GYRO_1_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3G4200D_GYRO_DEV_NAME,
[1] = LSM330DL_GYRO_DEV_NAME,
@@ -190,6 +191,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
},
{
.wai = ST_GYRO_2_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME,
[1] = LSM330D_GYRO_DEV_NAME,
@@ -252,6 +254,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
},
{
.wai = ST_GYRO_3_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME,
},
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index b4bcfb7..8d7d3a1 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -192,6 +192,7 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
static const struct st_sensor_settings st_magn_sensors_settings[] = {
{
.wai = 0, /* This sensor has no valid WhoAmI report 0 */
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM303DLH_MAGN_DEV_NAME,
},
@@ -268,6 +269,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
},
{
.wai = ST_MAGN_1_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM303DLHC_MAGN_DEV_NAME,
[1] = LSM303DLM_MAGN_DEV_NAME,
@@ -346,6 +348,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
},
{
.wai = ST_MAGN_2_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3MDL_MAGN_DEV_NAME,
},
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index e881fa6..eb41d2b 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -178,6 +178,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = {
static const struct st_sensor_settings st_press_sensors_settings[] = {
{
.wai = ST_PRESS_LPS331AP_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LPS331AP_PRESS_DEV_NAME,
},
@@ -225,6 +226,7 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
},
{
.wai = ST_PRESS_LPS001WP_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LPS001WP_PRESS_DEV_NAME,
},
@@ -260,6 +262,7 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
},
{
.wai = ST_PRESS_LPS25H_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LPS25H_PRESS_DEV_NAME,
},
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 2c476ac..3c17cd7 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -166,6 +166,7 @@ struct st_sensor_transfer_function {
/**
* struct st_sensor_settings - ST specific sensor settings
* @wai: Contents of WhoAmI register.
+ * @wai_addr: The address of WhoAmI register.
* @sensors_supported: List of supported sensors by struct itself.
* @ch: IIO channels for the sensor.
* @odr: Output data rate register and ODR list available.
@@ -179,6 +180,7 @@ struct st_sensor_transfer_function {
*/
struct st_sensor_settings {
u8 wai;
+ u8 wai_addr;
char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
struct iio_chan_spec *ch;
int num_ch;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
