On 16/07/15 10:17, Giuseppe Barba wrote:
> This patch add the full scale list size variable. This is
> needed for code clenup and to enable device with a single
> full scale value.
>
> Signed-off-by: Giuseppe Barba <giuseppe.barba@xxxxxx>
Hmm. I guess it is a slightly cleanup. Not convinced you couldn't have
continued using the 'null' test that was previously used though.
I'm not that bothered either way so will take it if the rest of
the series is fine.
Anyhow, Denis?
> ---
> drivers/iio/accel/st_accel_core.c | 4 ++++
> drivers/iio/common/st_sensors/st_sensors_core.c | 10 +++++-----
> drivers/iio/gyro/st_gyro_core.c | 3 +++
> drivers/iio/magnetometer/st_magn_core.c | 2 ++
> include/linux/iio/common/st_sensors.h | 1 +
> 5 files changed, 15 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 7ce027b..207f6ef 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -283,6 +283,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .gain = ST_ACCEL_1_FS_AVL_16_GAIN,
> },
> },
> + .fs_avl_cnt = 4,
> },
> .bdu = {
> .addr = ST_ACCEL_1_BDU_ADDR,
> @@ -346,6 +347,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .gain = ST_ACCEL_2_FS_AVL_8_GAIN,
> },
> },
> + .fs_avl_cnt = 3,
> },
> .bdu = {
> .addr = ST_ACCEL_2_BDU_ADDR,
> @@ -421,6 +423,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .gain = ST_ACCEL_3_FS_AVL_16_GAIN,
> },
> },
> + .fs_avl_cnt = 5,
> },
> .bdu = {
> .addr = ST_ACCEL_3_BDU_ADDR,
> @@ -480,6 +483,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> .gain = ST_ACCEL_4_FS_AVL_6_GAIN,
> },
> },
> + .fs_avl_cnt = 2,
> },
> .bdu = {
> .addr = ST_ACCEL_4_BDU_ADDR,
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> index c0a611e..d9845a6 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -106,7 +106,7 @@ static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
> {
> int i, ret = -EINVAL;
>
> - for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
> + for (i = 0; i < sensor_settings->fs.fs_avl_cnt; i++) {
> if (sensor_settings->fs.fs_avl[i].num == 0)
> goto st_sensors_match_odr_error;
>
> @@ -126,6 +126,9 @@ static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
> int err, i = 0;
> struct st_sensor_data *sdata = iio_priv(indio_dev);
>
> + if (sdata->sensor_settings->fs.fs_avl_cnt < 2)
> + return 0;
> +
> err = st_sensors_match_fs(sdata->sensor_settings, fs, &i);
> if (err < 0)
> goto st_accel_set_fullscale_error;
> @@ -560,10 +563,7 @@ ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
> struct st_sensor_data *sdata = iio_priv(indio_dev);
>
> mutex_lock(&indio_dev->mlock);
> - for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
> - if (sdata->sensor_settings->fs.fs_avl[i].num == 0)
> - break;
> -
> + for (i = 0; i < sdata->sensor_settings->fs.fs_avl_cnt; i++) {
> len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
> sdata->sensor_settings->fs.fs_avl[i].gain);
> }
> diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
> index 4b993a5..c06e8f7 100644
> --- a/drivers/iio/gyro/st_gyro_core.c
> +++ b/drivers/iio/gyro/st_gyro_core.c
> @@ -177,6 +177,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
> .gain = ST_GYRO_1_FS_AVL_2000_GAIN,
> },
> },
> + .fs_avl_cnt = 3,
> },
> .bdu = {
> .addr = ST_GYRO_1_BDU_ADDR,
> @@ -240,6 +241,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
> .gain = ST_GYRO_2_FS_AVL_2000_GAIN,
> },
> },
> + .fs_avl_cnt = 3,
> },
> .bdu = {
> .addr = ST_GYRO_2_BDU_ADDR,
> @@ -299,6 +301,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
> .gain = ST_GYRO_3_FS_AVL_2000_GAIN,
> },
> },
> + .fs_avl_cnt = 3,
> },
> .bdu = {
> .addr = ST_GYRO_3_BDU_ADDR,
> diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
> index 63da293..4c0335b 100644
> --- a/drivers/iio/magnetometer/st_magn_core.c
> +++ b/drivers/iio/magnetometer/st_magn_core.c
> @@ -341,6 +341,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
> .gain2 = ST_MAGN_1_FS_AVL_8100_GAIN_Z,
> },
> },
> + .fs_avl_cnt = 7,
> },
> .multi_read_bit = ST_MAGN_1_MULTIREAD_BIT,
> .bootime = 2,
> @@ -397,6 +398,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
> .gain = ST_MAGN_2_FS_AVL_16000_GAIN,
> },
> },
> + .fs_avl_cnt = 4,
> },
> .multi_read_bit = ST_MAGN_2_MULTIREAD_BIT,
> .bootime = 2,
> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> index f7c77b4..0d7d5bb 100644
> --- a/include/linux/iio/common/st_sensors.h
> +++ b/include/linux/iio/common/st_sensors.h
> @@ -101,6 +101,7 @@ struct st_sensor_fullscale_avl {
> struct st_sensor_fullscale {
> u8 addr;
> u8 mask;
> + u8 fs_avl_cnt;
> struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
