RE: [PATCH 4/5] iio:light:stk3310: use correct names and type for state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Hartmut Knaack [mailto:knaack.h@xxxxxx]
> Sent: Saturday, July 4, 2015 6:57 PM
> To: linux-iio@xxxxxxxxxxxxxxx
> Cc: Jonathan Cameron; Lars-Peter Clausen; Peter Meerwald; Breana, Tiberiu
> A
> Subject: [PATCH 4/5] iio:light:stk3310: use correct names and type for state
> 
> Indicate the bit number of predefined states, make use of these names and
> change the state type in _resume to u8 to avoid type casting.
> 
> Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx>

+1

Reviewed-by: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>

> ---
>  drivers/iio/light/stk3310.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c index
> 3650c0c..be715c7 100644
> --- a/drivers/iio/light/stk3310.c
> +++ b/drivers/iio/light/stk3310.c
> @@ -35,8 +35,8 @@
>  #define STK3310_REG_ID				0x3E
>  #define STK3310_MAX_REG				0x80
> 
> -#define STK3310_STATE_EN_PS			0x01
> -#define STK3310_STATE_EN_ALS			0x02
> +#define STK3310_STATE_EN_PS			BIT(0)
> +#define STK3310_STATE_EN_ALS			BIT(1)
>  #define STK3310_STATE_STANDBY			0x00
> 
>  #define STK3310_CHIP_ID_VAL			0x13
> @@ -436,8 +436,8 @@ static int stk3310_set_state(struct stk3310_data
> *data, u8 state)
>  		dev_err(&client->dev, "failed to change sensor state\n");
>  	} else if (state != STK3310_STATE_STANDBY) {
>  		/* Don't reset the 'enabled' flags if we're going in standby */
> -		data->ps_enabled  = !!(state & 0x01);
> -		data->als_enabled = !!(state & 0x02);
> +		data->ps_enabled  = !!(state & STK3310_STATE_EN_PS);
> +		data->als_enabled = !!(state & STK3310_STATE_EN_ALS);
>  	}
>  	mutex_unlock(&data->lock);
> 
> @@ -684,7 +684,7 @@ static int stk3310_suspend(struct device *dev)
> 
>  static int stk3310_resume(struct device *dev)  {
> -	int state = 0;
> +	u8 state = 0;
>  	struct stk3310_data *data;
> 
>  	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
> --
> 2.3.6

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux