On 02/07/15 23:27, Andreas Dannenberg wrote: > Signed-off-by: Andreas Dannenberg <dannenberg@xxxxxx> Utterly standard binding so unless someone shouts, I'll pick this up with the driver. Thanks, Jonathan > --- > .../devicetree/bindings/iio/light/opt3001.txt | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/opt3001.txt > > diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt > new file mode 100644 > index 0000000..d5f0765 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt > @@ -0,0 +1,18 @@ > +* Texas Instruments OPT3001 Ambient Light Sensor > + > +http://www.ti.com/product/opt3001 > + > +Required properties: > + - compatible: should be "ti,opt3001" > + - reg: the I2C address of the sensor > + - interrupt-parent: should be the phandle for the interrupt controller > + - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) > + > +Example: > + > +opt3001@44 { > + compatible = "ti,opt3001"; > + reg = <0x44>; > + interrupt-parent = <&gpio1>; > + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
