Apply the following coding style changes as indicated by checkpatch.pl in
strict mode:
- Please don't use multiple blank lines
- braces {} should be used on all arms of this statement (if/else)
- Alignment should match open parenthesis
- Please don't use multiple blank lines
- Blank lines aren't necessary after an open brace '{'
- Missing a blank line after declarations
- No space is necessary after a cast
Also wrap/consolidate error messages to fit 80 characters per line and
rework a comment.
Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx>
---
drivers/iio/accel/bmc150-accel.c | 91 +++++++++++++++++++++-------------------
1 file changed, 49 insertions(+), 42 deletions(-)
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index 36a9cd5..e84e2a1 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -241,7 +241,6 @@ static const struct {
{500000, BMC150_ACCEL_SLEEP_500_MS},
{1000000, BMC150_ACCEL_SLEEP_1_SEC} };
-
static int bmc150_accel_set_mode(struct bmc150_accel_data *data,
enum bmc150_power_modes mode,
int dur_us)
@@ -259,8 +258,9 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data,
dur_val =
bmc150_accel_sleep_value_table[i].reg_value;
}
- } else
+ } else {
dur_val = 0;
+ }
if (dur_val < 0)
return -EINVAL;
@@ -288,7 +288,7 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val,
for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) {
if (bmc150_accel_samp_freq_table[i].val == val &&
- bmc150_accel_samp_freq_table[i].val2 == val2) {
+ bmc150_accel_samp_freq_table[i].val2 == val2) {
ret = i2c_smbus_write_byte_data(
data->client,
BMC150_ACCEL_REG_PMU_BW,
@@ -351,8 +351,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID);
if (ret < 0) {
- dev_err(&data->client->dev,
- "Error: Reading chip id\n");
+ dev_err(&data->client->dev, "Error: Reading chip id\n");
return ret;
}
@@ -376,8 +375,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
BMC150_ACCEL_REG_PMU_RANGE,
BMC150_ACCEL_DEF_RANGE_4G);
if (ret < 0) {
- dev_err(&data->client->dev,
- "Error writing reg_pmu_range\n");
+ dev_err(&data->client->dev, "Error writing reg_pmu_range\n");
return ret;
}
@@ -437,12 +435,13 @@ static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on)
{
int ret;
- if (on)
+ if (on) {
ret = pm_runtime_get_sync(&data->client->dev);
- else {
+ } else {
pm_runtime_mark_last_busy(&data->client->dev);
ret = pm_runtime_put_autosuspend(&data->client->dev);
}
+
if (ret < 0) {
dev_err(&data->client->dev,
"Failed: bmc150_accel_set_power_state for %d\n", on);
@@ -514,13 +513,13 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
}
/*
- * We will expect the enable and disable to do operation in
- * in reverse order. This will happen here anyway as our
- * resume operation uses sync mode runtime pm calls, the
- * suspend operation will be delayed by autosuspend delay
- * So the disable operation will still happen in reverse of
- * enable operation. When runtime pm is disabled the mode
- * is always on so sequence doesn't matter
+ * We will expect the enable and disable to do operation in reverse
+ * order. This will happen here anyway, as our resume operation uses
+ * sync mode runtime pm calls. The suspend operation will be delayed
+ * by autosuspend delay.
+ * So the disable operation will still happen in reverse order of
+ * enable operation. When runtime pm is disabled the mode is always on,
+ * so sequence doesn't matter.
*/
ret = bmc150_accel_set_power_state(data, state);
if (ret < 0)
@@ -574,7 +573,6 @@ out_fix_power_state:
return ret;
}
-
static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val)
{
int ret, i;
@@ -674,8 +672,9 @@ static int bmc150_accel_read_raw(struct iio_dev *indio_dev,
if (chan->type == IIO_TEMP) {
*val = BMC150_ACCEL_TEMP_CENTER_VAL;
return IIO_VAL_INT;
- } else
+ } else {
return -EINVAL;
+ }
case IIO_CHAN_INFO_SCALE:
*val = 0;
switch (chan->type) {
@@ -793,7 +792,6 @@ static int bmc150_accel_read_event_config(struct iio_dev *indio_dev,
enum iio_event_type type,
enum iio_event_direction dir)
{
-
struct bmc150_accel_data *data = iio_priv(indio_dev);
return data->ev_enable_state;
@@ -827,7 +825,7 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,
}
static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev,
- struct iio_trigger *trig)
+ struct iio_trigger *trig)
{
struct bmc150_accel_data *data = iio_priv(indio_dev);
int i;
@@ -963,6 +961,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev,
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
int64_t tstamp;
uint64_t sample_period;
+
ret = i2c_smbus_read_byte_data(data->client,
BMC150_ACCEL_REG_FIFO_STATUS);
if (ret < 0) {
@@ -1255,7 +1254,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig)
}
static int bmc150_accel_trigger_set_state(struct iio_trigger *trig,
- bool state)
+ bool state)
{
struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig);
struct bmc150_accel_data *data = t->data;
@@ -1314,26 +1313,32 @@ static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev)
dir = IIO_EV_DIR_RISING;
if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X)
- iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
- 0,
- IIO_MOD_X,
- IIO_EV_TYPE_ROC,
- dir),
- data->timestamp);
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_X,
+ IIO_EV_TYPE_ROC,
+ dir),
+ data->timestamp);
+
if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y)
- iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
- 0,
- IIO_MOD_Y,
- IIO_EV_TYPE_ROC,
- dir),
- data->timestamp);
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_Y,
+ IIO_EV_TYPE_ROC,
+ dir),
+ data->timestamp);
+
if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z)
- iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
- 0,
- IIO_MOD_Z,
- IIO_EV_TYPE_ROC,
- dir),
- data->timestamp);
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_Z,
+ IIO_EV_TYPE_ROC,
+ dir),
+ data->timestamp);
+
return ret;
}
@@ -1365,7 +1370,9 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private)
BMC150_ACCEL_INT_MODE_LATCH_INT |
BMC150_ACCEL_INT_MODE_LATCH_RESET);
if (ret)
- dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n");
+ dev_err(&data->client->dev,
+ "Error writing reg_int_rst_latch\n");
+
ret = IRQ_HANDLED;
} else {
ret = IRQ_NONE;
@@ -1412,13 +1419,13 @@ static const char *bmc150_accel_match_acpi_device(struct device *dev, int *data)
if (!id)
return NULL;
- *data = (int) id->driver_data;
+ *data = (int)id->driver_data;
return dev_name(dev);
}
static int bmc150_accel_gpio_probe(struct i2c_client *client,
- struct bmc150_accel_data *data)
+ struct bmc150_accel_data *data)
{
struct device *dev;
struct gpio_desc *gpio;
--
2.3.6
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
