On 28/05/15 20:50, Marek Belisko wrote: > From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx> > > The bit mask to read the setting of the constant current source > for measuring the NTC voltage was the wrong one. Since default > value is initialized to the lowest level (000 = 10uA) the difference > was probably never noticed in practice. I'm going to take that literally and apply it via the slow route on the basis that a bug no one noticed doesn't need fixing fast! > > Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> > Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx> Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > drivers/iio/adc/twl4030-madc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c > index 94c5f05..6d2d429 100644 > --- a/drivers/iio/adc/twl4030-madc.c > +++ b/drivers/iio/adc/twl4030-madc.c > @@ -235,7 +235,7 @@ static int twl4030battery_temperature(int raw_volt) > if (ret < 0) > return ret; > > - curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10; > + curr = ((val & TWL4030_BCI_ITHSENS) + 1) * 10; > /* Getting and calculating the thermistor resistance in ohms */ > res = volt * 1000 / curr; > /* calculating temperature */ > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
