On 01/06/15 14:39, Martin Fuzzey wrote:
> Implement interrupt driven trigger for data ready.
> This allows more efficient access to the sample data.
>
> Signed-off-by: Martin Fuzzey <mfuzzey@xxxxxxxxxxx>
The validate trigger is the easy way. If anyone actually wants to do it
the generic way they can always send patches ;)
Applied to the togreg branch of iio.git - initially pushed out as testing.
Thanks,
Jonathan
> ---
> drivers/iio/accel/mma8452.c | 97 ++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 91 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
> index 51ae751..e8e2077 100644
> --- a/drivers/iio/accel/mma8452.c
> +++ b/drivers/iio/accel/mma8452.c
> @@ -18,6 +18,8 @@
> #include <linux/iio/sysfs.h>
> #include <linux/iio/trigger_consumer.h>
> #include <linux/iio/buffer.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/trigger_consumer.h>
> #include <linux/iio/triggered_buffer.h>
> #include <linux/iio/events.h>
> #include <linux/delay.h>
> @@ -66,6 +68,7 @@
> #define MMA8452_DATA_CFG_FS_8G 2
> #define MMA8452_DATA_CFG_HPF_MASK BIT(4)
>
> +#define MMA8452_INT_DRDY BIT(0)
> #define MMA8452_INT_TRANS BIT(5)
>
> #define MMA8452_DEVICE_ID 0x2a
> @@ -577,18 +580,24 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
> {
> struct iio_dev *indio_dev = p;
> struct mma8452_data *data = iio_priv(indio_dev);
> + int ret = IRQ_NONE;
> int src;
>
> src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC);
> if (src < 0)
> return IRQ_NONE;
>
> + if (src & MMA8452_INT_DRDY) {
> + iio_trigger_poll_chained(indio_dev->trig);
> + ret = IRQ_HANDLED;
> + }
> +
> if (src & MMA8452_INT_TRANS) {
> mma8452_transient_interrupt(indio_dev);
> - return IRQ_HANDLED;
> + ret = IRQ_HANDLED;
> }
>
> - return IRQ_NONE;
> + return ret;
> }
>
> static irqreturn_t mma8452_trigger_handler(int irq, void *p)
> @@ -714,6 +723,72 @@ static const struct iio_info mma8452_info = {
>
> static const unsigned long mma8452_scan_masks[] = {0x7, 0};
>
> +static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig,
> + bool state)
> +{
> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> + struct mma8452_data *data = iio_priv(indio_dev);
> + int reg;
> +
> + reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG4);
> + if (reg < 0)
> + return reg;
> +
> + if (state)
> + reg |= MMA8452_INT_DRDY;
> + else
> + reg &= ~MMA8452_INT_DRDY;
> +
> + return mma8452_change_config(data, MMA8452_CTRL_REG4, reg);
> +}
> +
> +static int mma8452_validate_device(struct iio_trigger *trig,
> + struct iio_dev *indio_dev)
> +{
> + struct iio_dev *indio = iio_trigger_get_drvdata(trig);
> +
> + if (indio != indio_dev)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static const struct iio_trigger_ops mma8452_trigger_ops = {
> + .set_trigger_state = mma8452_data_rdy_trigger_set_state,
> + .validate_device = mma8452_validate_device,
> + .owner = THIS_MODULE,
> +};
> +
> +static int mma8452_trigger_setup(struct iio_dev *indio_dev)
> +{
> + struct mma8452_data *data = iio_priv(indio_dev);
> + struct iio_trigger *trig;
> + int ret;
> +
> + trig = devm_iio_trigger_alloc(&data->client->dev, "%s-dev%d",
> + indio_dev->name,
> + indio_dev->id);
> + if (!trig)
> + return -ENOMEM;
> +
> + trig->dev.parent = &data->client->dev;
> + trig->ops = &mma8452_trigger_ops;
> + iio_trigger_set_drvdata(trig, indio_dev);
> +
> + ret = iio_trigger_register(trig);
> + if (ret)
> + return ret;
> +
> + indio_dev->trig = trig;
> + return 0;
> +}
> +
> +static void mma8452_trigger_cleanup(struct iio_dev *indio_dev)
> +{
> + if (indio_dev->trig)
> + iio_trigger_unregister(indio_dev->trig);
> +}
> +
> static int mma8452_reset(struct i2c_client *client)
> {
> int i;
> @@ -794,7 +869,8 @@ static int mma8452_probe(struct i2c_client *client,
> * enabled until userspace asks for it by
> * mma8452_write_event_config()
> */
> - int supported_interrupts = MMA8452_INT_TRANS;
> + int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS;
> + int enabled_interrupts = MMA8452_INT_TRANS;
>
> /* Assume wired to INT1 pin */
> ret = i2c_smbus_write_byte_data(client,
> @@ -805,7 +881,11 @@ static int mma8452_probe(struct i2c_client *client,
>
> ret = i2c_smbus_write_byte_data(client,
> MMA8452_CTRL_REG4,
> - supported_interrupts);
> + enabled_interrupts);
> + if (ret < 0)
> + return ret;
> +
> + ret = mma8452_trigger_setup(indio_dev);
> if (ret < 0)
> return ret;
> }
> @@ -815,12 +895,12 @@ static int mma8452_probe(struct i2c_client *client,
> ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
> data->ctrl_reg1);
> if (ret < 0)
> - return ret;
> + goto trigger_cleanup;
>
> ret = iio_triggered_buffer_setup(indio_dev, NULL,
> mma8452_trigger_handler, NULL);
> if (ret < 0)
> - return ret;
> + goto trigger_cleanup;
>
> if (client->irq) {
> ret = devm_request_threaded_irq(&client->dev,
> @@ -840,6 +920,10 @@ static int mma8452_probe(struct i2c_client *client,
>
> buffer_cleanup:
> iio_triggered_buffer_cleanup(indio_dev);
> +
> +trigger_cleanup:
> + mma8452_trigger_cleanup(indio_dev);
> +
> return ret;
> }
>
> @@ -849,6 +933,7 @@ static int mma8452_remove(struct i2c_client *client)
>
> iio_device_unregister(indio_dev);
> iio_triggered_buffer_cleanup(indio_dev);
> + mma8452_trigger_cleanup(indio_dev);
> mma8452_standby(iio_priv(indio_dev));
>
> return 0;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
