On Tue, May 26, 2015 at 09:15:53PM +0000, Cooper Jr., Franklin wrote: > Michael, > > Can you send me the output of ts_test_raw after you done a 5 or so touch down and touch up events? In the output let me know at which point in the log that the issue you observed has occurred. Please try to avoid moving your finger since I want to see the full output of that program but I'm not interested any unnecessary pen down events. > Oddly the repeated pen up and down events do not occur when running ts_print_raw: root@som3517-som200:~# ts_print_raw 1418169393.147827: 1648 2075 206 1418169393.229976: 1725 1983 240 1418169393.312154: 1731 1980 240 1418169393.394333: 1706 2043 239 1418169393.476523: 1703 2028 241 1418169393.558708: 1714 2041 240 1418169393.640888: 1704 2041 240 1418169393.721556: 0 0 0 1418169395.283096: 2889 2512 192 1418169395.365236: 2947 2486 210 1418169395.447413: 2949 2470 211 1418169395.529606: 2943 2497 211 1418169395.611759: 2922 2506 211 1418169395.693935: 2866 2474 213 1418169395.776135: 2858 2481 214 1418169395.858305: 2861 2451 213 1418169395.938972: 0 0 0 1418169397.482867: 1083 1981 236 1418169397.565026: 1157 1832 254 1418169397.647217: 1161 1856 256 1418169397.729412: 1158 1883 255 1418169397.811583: 1159 1841 255 1418169397.893760: 1159 1864 256 1418169397.975947: 1158 1893 256 1418169398.056605: 0 0 0 1418169399.690290: 2299 2372 178 1418169399.772432: 2388 2160 221 1418169399.854611: 2391 2190 223 1418169399.936802: 2379 2207 223 1418169400.018966: 2389 2184 223 1418169400.101146: 2383 2208 224 1418169400.183338: 2381 2203 223 1418169400.264012: 0 0 0 1418169402.073266: 1230 2381 212 1418169402.155413: 1301 2097 247 1418169402.237590: 1313 2077 248 1418169402.319772: 1307 2126 248 1418169402.401948: 1304 2096 248 1418169402.484127: 4078 2155 58 1418169402.564801: 0 0 0 Here is what the output of ts_test looks like without even touching the screen: root@som3517-som200:~# ts_test 1418169549.722957: 816 17 58 1418169549.803604: 816 17 0 1418169549.817757: 816 25 58 1418169549.898411: 816 25 0 1418169549.912828: 816 41 59 1418169549.993463: 816 41 0 1418169550.007771: 816 28 58 1418169550.088404: 816 28 0 1418169550.102828: 816 33 58 1418169550.183486: 816 33 0 1418169550.197767: 816 42 59 1418169550.278401: 816 42 0 1418169550.292970: 816 23 58 1418169550.373604: 816 23 0 1418169550.387773: 816 28 58 1418169550.468404: 816 28 0 1418169550.482955: 816 32 59 1418169550.563600: 816 32 0 1418169550.577773: 816 25 58 1418169550.658406: 816 25 0 1418169550.672827: 816 35 59 1418169550.753464: 816 35 0 1418169550.767761: 816 42 59 1418169550.848407: 816 42 0 1418169550.862826: 816 41 59 1418169550.943462: 816 41 0 1418169550.958013: 816 37 59 1418169551.038655: 816 37 0 1418169551.052824: 816 41 59 1418169551.133475: 816 41 0 1418169551.147774: 816 28 58 1418169551.228406: 816 28 0 . . > I recently encountered several touchscreen problems that I am working on submitting to mainline. Below are the variety of issues I discovered and fixed but its currently based on 3.14 kernel. > > 1. The x and y location right before a penup event is usually incorrect. Visibly the causes the cursor to jump right before a touchup. So I implemented a way to ignore that incorrect event. > 2. I discovered that for some reason a series of touch up events are sent back to back. So I added something to ignore consecutive pen up events. > 3. Sometimes a pen down event is reported with a pressure of 0. I noticed applications like ts_lib looked at the pressure and thought a pressure of 0 means a finger was lifted. So I added a patch that ignored 0 pressure pen down events. This prevented premature touchups. > 4. I added debouncing. Essentially the driver didn't report any touch events for a user specified number of ms after a pen up occured. It was noticed especially during touchscreen calibration that after a person lifted their finger after touching the screen a combination of pen up and pen down events were incorrectly detected. > > Most likely a combination of 2-4 is your problem. I think the udelay acted like an unintentional debounce which is probably why it wasn't discovered sooner. > > > > > > -- > > > balbi > > > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
