Hi Greg, We have a fix for one of these fixes, so please ignore this I'll apply that as a fixup and then send you a fresh pull request. sorry for the noise. Jonathan On 10/05/15 21:13, Jonathan Cameron wrote: > The following changes since commit c610f7f772aa06ae2bd8e5ace87cde4d90f70198: > > Merge 4.0-rc7 into staging-next (2015-04-07 11:03:02 +0200) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-4.1a > > for you to fetch changes up to 54b8e12ecddafabd0fc1e9a720e5a00907e2c28b: > > iio: light: hid-sensor-prox: Fix memory leak in probe() (2015-05-08 09:54:52 -0400) > > ---------------------------------------------------------------- > The usual mixed bag of fixes for IIO in the 4.1 cycle. > > One core fix > > * Set updated for a iio kfifo was incorrectly set to false during a failed > update, resulting in atttempts to repeat the failed operation appearing > to succeed. > > This time I've decided to list the driver fixes in alphabetical order rather > than 'randomly'. > > * axp288_adc - a recent change added a check for valid info masks when > reading channels from consumer drivers. > * bmp280 - temperature compensation was failing to read the tfine value, hence > causing a temperature of 0 to always be returned and incorrect presure > measurements. > * cc10001 - Fix channel number mapping when some channels are reserved for > remote CPUs. Fix an issue with the use of the power-up/power-down register > (basically wrong polarity). Fix an issue due to the missinterpretting the > return value from regulator_get_voltage. Add a delay before the start bit > as recommended for the hardware to avoid data corruption. > * hid pressure - fix channel spec of modfiied, but no modifier (which makes no > sense!) > * hid proximity - fix channel spec of modified, but no modifier (which makes > no sense!). Fix a memory leak in the probe function. > * mcp320x - occasional incorrect readings on dma using spi busses due to > cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers. > * mma9551 - buffer overrun fix (miss specified maximum length of buffers) > * mma9553 - endian fix on status message. Add an enable element for activity > channel. Input checking for activity period to avoid rather unpredictable > results. > * spmi-vadc - fix an overflow in the output value normalization seen on some > boards. > * st-snesors - oops due to use of a mutex that is not yet initialized during > probe. > * xilinx adc - Some wrong register addresses, a wrong address for vccaux > channel, incorrect scale on VREFP and incorrect sign on VREFN. > > ---------------------------------------------------------------- > Alban Bedel (1): > iio:st_sensors: Fix oops when probing SPI devices > > Fabio Estevam (1): > iio: light: hid-sensor-prox: Fix memory leak in probe() > > Gabriele Mazzotta (1): > iio: kfifo: Set update_needed to false only if a buffer was allocated > > Irina Tirdea (5): > iio: pressure: bmp280: fix temp compensation > iio: accel: mma9553: fix endianness issue when reading status > iio: accel: mma9551_core: prevent buffer overrun > iio: accel: mma9553: add enable channel for activity > iio: accel: mma9553: check input value for activity period > > Ivan T. Ivanov (1): > iio: adc: spmi-vadc: Fix overflow in output value normalization > > Jacob Pan (1): > iio/axp288_adc: add missing channel info mask > > Michael Welling (1): > iio: mcp320x: Fix occasional incorrect readings > > Naidu Tellapati (4): > iio: adc: cc10001: Fix the channel number mapping > iio: adc: cc10001: Fix incorrect use of power-up/power-down register > iio: adc: cc10001: Fix regulator_get_voltage() return value check > iio: adc: cc10001: Add delay before setting START bit > > Srinivas Pandruvada (2): > iio: light: hid-sensor-prox: Fix modifier > iio: pressure: hid-sensor-press: Fix modifier > > Thomas Betker (4): > iio: adc: xilinx: Fix register addresses > iio: adc: xilinx: Fix "vccaux" channel .address > iio: adc: xilinx: Fix VREFP scale > iio: adc: xilinx: Fix VREFN sign > > drivers/iio/accel/mma9551_core.c | 21 +++++++-- > drivers/iio/accel/mma9553.c | 18 +++---- > drivers/iio/accel/st_accel_core.c | 1 + > drivers/iio/adc/axp288_adc.c | 12 ++--- > drivers/iio/adc/cc10001_adc.c | 62 ++++++++++++++----------- > drivers/iio/adc/mcp320x.c | 6 +-- > drivers/iio/adc/qcom-spmi-vadc.c | 7 +-- > drivers/iio/adc/xilinx-xadc-core.c | 5 +- > drivers/iio/adc/xilinx-xadc.h | 6 +-- > drivers/iio/common/st_sensors/st_sensors_core.c | 2 - > drivers/iio/gyro/st_gyro_core.c | 1 + > drivers/iio/kfifo_buf.c | 3 +- > drivers/iio/light/hid-sensor-prox.c | 12 ++--- > drivers/iio/magnetometer/st_magn_core.c | 1 + > drivers/iio/pressure/bmp280.c | 1 + > drivers/iio/pressure/hid-sensor-press.c | 2 - > drivers/iio/pressure/st_pressure_core.c | 1 + > 17 files changed, 95 insertions(+), 66 deletions(-) > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
