Re: [PATCH v3 1/4] iio: magn: Add support for BMC150 magnetometer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/04/15 19:16, Irina Tirdea wrote:
> Add support for the Bosh BMC150 Magnetometer.
> The specification can be downloaded from:
> http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf.
> The chip contains both an accelerometer and a magnetometer.
> This patch adds support only for the magnetometer part.
> 
> The temperature compensation formulas are based on bmm050_api.c
> authored by contact@xxxxxxxxxxxxxxxxxxx.
> 
> Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
I was actually happy enough with the previous version to put it in my to apply
pile ;)

Anyhow, all 4 patches applied to the togreg branch of iio.git.  Will push out
as testing when I am not in a rather noisy cleanroom (though not half as noisy as
it is when the machine behind me is running) in the middle of the night
waiting for clonezilla to image a PC so I can go off to the hotel bar (which has
wifi unlike here)... Not that I'm moaning or anything, but need to be back here in 8
hours...

Jonathan
> ---
>  drivers/iio/magnetometer/Kconfig       |  14 +
>  drivers/iio/magnetometer/Makefile      |   2 +
>  drivers/iio/magnetometer/bmc150_magn.c | 984 +++++++++++++++++++++++++++++++++
>  3 files changed, 1000 insertions(+)
>  create mode 100644 drivers/iio/magnetometer/bmc150_magn.c
> 
> diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
> index a5d6de7..008baca 100644
> --- a/drivers/iio/magnetometer/Kconfig
> +++ b/drivers/iio/magnetometer/Kconfig
> @@ -76,4 +76,18 @@ config IIO_ST_MAGN_SPI_3AXIS
>  	depends on IIO_ST_MAGN_3AXIS
>  	depends on IIO_ST_SENSORS_SPI
>  
> +config BMC150_MAGN
> +	tristate "Bosch BMC150 Magnetometer Driver"
> +	depends on I2C
> +	select IIO_BUFFER
> +	select IIO_TRIGGERED_BUFFER
> +	help
> +	  Say yes here to build support for the BMC150 magnetometer.
> +
> +	  Currently this only supports the device via an i2c interface.
> +
> +	  This is a combo module with both accelerometer and magnetometer.
> +	  This driver is only implementing magnetometer part, which has
> +	  its own address and register map.
> +
>  endmenu
> diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
> index 0f5d3c9..e2c3459 100644
> --- a/drivers/iio/magnetometer/Makefile
> +++ b/drivers/iio/magnetometer/Makefile
> @@ -13,3 +13,5 @@ st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o
>  
>  obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o
>  obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o
> +
> +obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
> diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c
> new file mode 100644
> index 0000000..7bbaea8
> --- /dev/null
> +++ b/drivers/iio/magnetometer/bmc150_magn.c
> @@ -0,0 +1,984 @@
> +/*
> + * Bosch BMC150 three-axis magnetic field sensor driver
> + *
> + * Copyright (c) 2015, Intel Corporation.
> + *
> + * This code is based on bmm050_api.c authored by contact@xxxxxxxxxxxxxxxxxxx:
> + *
> + * (C) Copyright 2011~2014 Bosch Sensortec GmbH All Rights Reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/acpi.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/events.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/regmap.h>
> +
> +#define BMC150_MAGN_DRV_NAME			"bmc150_magn"
> +#define BMC150_MAGN_IRQ_NAME			"bmc150_magn_event"
> +#define BMC150_MAGN_GPIO_INT			"interrupt"
> +
> +#define BMC150_MAGN_REG_CHIP_ID			0x40
> +#define BMC150_MAGN_CHIP_ID_VAL			0x32
> +
> +#define BMC150_MAGN_REG_X_L			0x42
> +#define BMC150_MAGN_REG_X_M			0x43
> +#define BMC150_MAGN_REG_Y_L			0x44
> +#define BMC150_MAGN_REG_Y_M			0x45
> +#define BMC150_MAGN_SHIFT_XY_L			3
> +#define BMC150_MAGN_REG_Z_L			0x46
> +#define BMC150_MAGN_REG_Z_M			0x47
> +#define BMC150_MAGN_SHIFT_Z_L			1
> +#define BMC150_MAGN_REG_RHALL_L			0x48
> +#define BMC150_MAGN_REG_RHALL_M			0x49
> +#define BMC150_MAGN_SHIFT_RHALL_L		2
> +
> +#define BMC150_MAGN_REG_INT_STATUS		0x4A
> +
> +#define BMC150_MAGN_REG_POWER			0x4B
> +#define BMC150_MAGN_MASK_POWER_CTL		BIT(0)
> +
> +#define BMC150_MAGN_REG_OPMODE_ODR		0x4C
> +#define BMC150_MAGN_MASK_OPMODE			GENMASK(2, 1)
> +#define BMC150_MAGN_SHIFT_OPMODE		1
> +#define BMC150_MAGN_MODE_NORMAL			0x00
> +#define BMC150_MAGN_MODE_FORCED			0x01
> +#define BMC150_MAGN_MODE_SLEEP			0x03
> +#define BMC150_MAGN_MASK_ODR			GENMASK(5, 3)
> +#define BMC150_MAGN_SHIFT_ODR			3
> +
> +#define BMC150_MAGN_REG_INT			0x4D
> +
> +#define BMC150_MAGN_REG_INT_DRDY		0x4E
> +#define BMC150_MAGN_MASK_DRDY_EN		BIT(7)
> +#define BMC150_MAGN_SHIFT_DRDY_EN		7
> +#define BMC150_MAGN_MASK_DRDY_INT3		BIT(6)
> +#define BMC150_MAGN_MASK_DRDY_Z_EN		BIT(5)
> +#define BMC150_MAGN_MASK_DRDY_Y_EN		BIT(4)
> +#define BMC150_MAGN_MASK_DRDY_X_EN		BIT(3)
> +#define BMC150_MAGN_MASK_DRDY_DR_POLARITY	BIT(2)
> +#define BMC150_MAGN_MASK_DRDY_LATCHING		BIT(1)
> +#define BMC150_MAGN_MASK_DRDY_INT3_POLARITY	BIT(0)
> +
> +#define BMC150_MAGN_REG_LOW_THRESH		0x4F
> +#define BMC150_MAGN_REG_HIGH_THRESH		0x50
> +#define BMC150_MAGN_REG_REP_XY			0x51
> +#define BMC150_MAGN_REG_REP_Z			0x52
> +
> +#define BMC150_MAGN_REG_TRIM_START		0x5D
> +#define BMC150_MAGN_REG_TRIM_END		0x71
> +
> +#define BMC150_MAGN_XY_OVERFLOW_VAL		-4096
> +#define BMC150_MAGN_Z_OVERFLOW_VAL		-16384
> +
> +/* Time from SUSPEND to SLEEP */
> +#define BMC150_MAGN_START_UP_TIME_MS		3
> +
> +#define BMC150_MAGN_AUTO_SUSPEND_DELAY_MS	2000
> +
> +#define BMC150_MAGN_REGVAL_TO_REPXY(regval) (((regval) * 2) + 1)
> +#define BMC150_MAGN_REGVAL_TO_REPZ(regval) ((regval) + 1)
> +#define BMC150_MAGN_REPXY_TO_REGVAL(rep) (((rep) - 1) / 2)
> +#define BMC150_MAGN_REPZ_TO_REGVAL(rep) ((rep) - 1)
> +
> +enum bmc150_magn_axis {
> +	AXIS_X,
> +	AXIS_Y,
> +	AXIS_Z,
> +	RHALL,
> +	AXIS_XYZ_MAX = RHALL,
> +	AXIS_XYZR_MAX,
> +};
> +
> +enum bmc150_magn_power_modes {
> +	BMC150_MAGN_POWER_MODE_SUSPEND,
> +	BMC150_MAGN_POWER_MODE_SLEEP,
> +	BMC150_MAGN_POWER_MODE_NORMAL,
> +};
> +
> +struct bmc150_magn_trim_regs {
> +	s8 x1;
> +	s8 y1;
> +	__le16 reserved1;
> +	u8 reserved2;
> +	__le16 z4;
> +	s8 x2;
> +	s8 y2;
> +	__le16 reserved3;
> +	__le16 z2;
> +	__le16 z1;
> +	__le16 xyz1;
> +	__le16 z3;
> +	s8 xy2;
> +	u8 xy1;
> +} __packed;
> +
> +struct bmc150_magn_data {
> +	struct i2c_client *client;
> +	/*
> +	 * 1. Protect this structure.
> +	 * 2. Serialize sequences that power on/off the device and access HW.
> +	 */
> +	struct mutex mutex;
> +	struct regmap *regmap;
> +	/* 4 x 32 bits for x, y z, 4 bytes align, 64 bits timestamp */
> +	s32 buffer[6];
> +	struct iio_trigger *dready_trig;
> +	bool dready_trigger_on;
> +};
> +
> +static const struct {
> +	int freq;
> +	u8 reg_val;
> +} bmc150_magn_samp_freq_table[] = { {2, 0x01},
> +				    {6, 0x02},
> +				    {8, 0x03},
> +				    {10, 0x00},
> +				    {15, 0x04},
> +				    {20, 0x05},
> +				    {25, 0x06},
> +				    {30, 0x07} };
> +
> +enum bmc150_magn_presets {
> +	LOW_POWER_PRESET,
> +	REGULAR_PRESET,
> +	ENHANCED_REGULAR_PRESET,
> +	HIGH_ACCURACY_PRESET
> +};
> +
> +static const struct bmc150_magn_preset {
> +	u8 rep_xy;
> +	u8 rep_z;
> +	u8 odr;
> +} bmc150_magn_presets_table[] = {
> +	[LOW_POWER_PRESET] = {3, 3, 10},
> +	[REGULAR_PRESET] =  {9, 15, 10},
> +	[ENHANCED_REGULAR_PRESET] =  {15, 27, 10},
> +	[HIGH_ACCURACY_PRESET] =  {47, 83, 20},
> +};
> +
> +#define BMC150_MAGN_DEFAULT_PRESET REGULAR_PRESET
> +
> +static bool bmc150_magn_is_writeable_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case BMC150_MAGN_REG_POWER:
> +	case BMC150_MAGN_REG_OPMODE_ODR:
> +	case BMC150_MAGN_REG_INT:
> +	case BMC150_MAGN_REG_INT_DRDY:
> +	case BMC150_MAGN_REG_LOW_THRESH:
> +	case BMC150_MAGN_REG_HIGH_THRESH:
> +	case BMC150_MAGN_REG_REP_XY:
> +	case BMC150_MAGN_REG_REP_Z:
> +		return true;
> +	default:
> +		return false;
> +	};
> +}
> +
> +static bool bmc150_magn_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case BMC150_MAGN_REG_X_L:
> +	case BMC150_MAGN_REG_X_M:
> +	case BMC150_MAGN_REG_Y_L:
> +	case BMC150_MAGN_REG_Y_M:
> +	case BMC150_MAGN_REG_Z_L:
> +	case BMC150_MAGN_REG_Z_M:
> +	case BMC150_MAGN_REG_RHALL_L:
> +	case BMC150_MAGN_REG_RHALL_M:
> +	case BMC150_MAGN_REG_INT_STATUS:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static const struct regmap_config bmc150_magn_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = BMC150_MAGN_REG_TRIM_END,
> +	.cache_type = REGCACHE_RBTREE,
> +
> +	.writeable_reg = bmc150_magn_is_writeable_reg,
> +	.volatile_reg = bmc150_magn_is_volatile_reg,
> +};
> +
> +static int bmc150_magn_set_power_mode(struct bmc150_magn_data *data,
> +				      enum bmc150_magn_power_modes mode,
> +				      bool state)
> +{
> +	int ret;
> +
> +	switch (mode) {
> +	case BMC150_MAGN_POWER_MODE_SUSPEND:
> +		ret = regmap_update_bits(data->regmap, BMC150_MAGN_REG_POWER,
> +					 BMC150_MAGN_MASK_POWER_CTL, !state);
> +		if (ret < 0)
> +			return ret;
> +		usleep_range(BMC150_MAGN_START_UP_TIME_MS * 1000, 20000);
> +		return 0;
> +	case BMC150_MAGN_POWER_MODE_SLEEP:
> +		return regmap_update_bits(data->regmap,
> +					  BMC150_MAGN_REG_OPMODE_ODR,
> +					  BMC150_MAGN_MASK_OPMODE,
> +					  BMC150_MAGN_MODE_SLEEP <<
> +					  BMC150_MAGN_SHIFT_OPMODE);
> +	case BMC150_MAGN_POWER_MODE_NORMAL:
> +		return regmap_update_bits(data->regmap,
> +					  BMC150_MAGN_REG_OPMODE_ODR,
> +					  BMC150_MAGN_MASK_OPMODE,
> +					  BMC150_MAGN_MODE_NORMAL <<
> +					  BMC150_MAGN_SHIFT_OPMODE);
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int bmc150_magn_set_power_state(struct bmc150_magn_data *data, bool on)
> +{
> +#ifdef CONFIG_PM
> +	int ret;
> +
> +	if (on) {
> +		ret = pm_runtime_get_sync(&data->client->dev);
> +	} else {
> +		pm_runtime_mark_last_busy(&data->client->dev);
> +		ret = pm_runtime_put_autosuspend(&data->client->dev);
> +	}
> +
> +	if (ret < 0) {
> +		dev_err(&data->client->dev,
> +			"failed to change power state to %d\n", on);
> +		if (on)
> +			pm_runtime_put_noidle(&data->client->dev);
> +
> +		return ret;
> +	}
> +#endif
> +
> +	return 0;
> +}
> +
> +static int bmc150_magn_get_odr(struct bmc150_magn_data *data, int *val)
> +{
> +	int ret, reg_val;
> +	u8 i, odr_val;
> +
> +	ret = regmap_read(data->regmap, BMC150_MAGN_REG_OPMODE_ODR, &reg_val);
> +	if (ret < 0)
> +		return ret;
> +	odr_val = (reg_val & BMC150_MAGN_MASK_ODR) >> BMC150_MAGN_SHIFT_ODR;
> +
> +	for (i = 0; i < ARRAY_SIZE(bmc150_magn_samp_freq_table); i++)
> +		if (bmc150_magn_samp_freq_table[i].reg_val == odr_val) {
> +			*val = bmc150_magn_samp_freq_table[i].freq;
> +			return 0;
> +		}
> +
> +	return -EINVAL;
> +}
> +
> +static int bmc150_magn_set_odr(struct bmc150_magn_data *data, int val)
> +{
> +	int ret;
> +	u8 i;
> +
> +	for (i = 0; i < ARRAY_SIZE(bmc150_magn_samp_freq_table); i++) {
> +		if (bmc150_magn_samp_freq_table[i].freq == val) {
> +			ret = regmap_update_bits(data->regmap,
> +						 BMC150_MAGN_REG_OPMODE_ODR,
> +						 BMC150_MAGN_MASK_ODR,
> +						 bmc150_magn_samp_freq_table[i].
> +						 reg_val <<
> +						 BMC150_MAGN_SHIFT_ODR);
> +			if (ret < 0)
> +				return ret;
> +			return 0;
> +		}
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static s32 bmc150_magn_compensate_x(struct bmc150_magn_trim_regs *tregs, s16 x,
> +				    u16 rhall)
> +{
> +	s16 val;
> +	u16 xyz1 = le16_to_cpu(tregs->xyz1);
> +
> +	if (x == BMC150_MAGN_XY_OVERFLOW_VAL)
> +		return S32_MIN;
> +
> +	if (!rhall)
> +		rhall = xyz1;
> +
> +	val = ((s16)(((u16)((((s32)xyz1) << 14) / rhall)) - ((u16)0x4000)));
> +	val = ((s16)((((s32)x) * ((((((((s32)tregs->xy2) * ((((s32)val) *
> +	      ((s32)val)) >> 7)) + (((s32)val) *
> +	      ((s32)(((s16)tregs->xy1) << 7)))) >> 9) + ((s32)0x100000)) *
> +	      ((s32)(((s16)tregs->x2) + ((s16)0xA0)))) >> 12)) >> 13)) +
> +	      (((s16)tregs->x1) << 3);
> +
> +	return (s32)val;
> +}
> +
> +static s32 bmc150_magn_compensate_y(struct bmc150_magn_trim_regs *tregs, s16 y,
> +				    u16 rhall)
> +{
> +	s16 val;
> +	u16 xyz1 = le16_to_cpu(tregs->xyz1);
> +
> +	if (y == BMC150_MAGN_XY_OVERFLOW_VAL)
> +		return S32_MIN;
> +
> +	if (!rhall)
> +		rhall = xyz1;
> +
> +	val = ((s16)(((u16)((((s32)xyz1) << 14) / rhall)) - ((u16)0x4000)));
> +	val = ((s16)((((s32)y) * ((((((((s32)tregs->xy2) * ((((s32)val) *
> +	      ((s32)val)) >> 7)) + (((s32)val) *
> +	      ((s32)(((s16)tregs->xy1) << 7)))) >> 9) + ((s32)0x100000)) *
> +	      ((s32)(((s16)tregs->y2) + ((s16)0xA0)))) >> 12)) >> 13)) +
> +	      (((s16)tregs->y1) << 3);
> +
> +	return (s32)val;
> +}
> +
> +static s32 bmc150_magn_compensate_z(struct bmc150_magn_trim_regs *tregs, s16 z,
> +				    u16 rhall)
> +{
> +	s32 val;
> +	u16 xyz1 = le16_to_cpu(tregs->xyz1);
> +	u16 z1 = le16_to_cpu(tregs->z1);
> +	s16 z2 = le16_to_cpu(tregs->z2);
> +	s16 z3 = le16_to_cpu(tregs->z3);
> +	s16 z4 = le16_to_cpu(tregs->z4);
> +
> +	if (z == BMC150_MAGN_Z_OVERFLOW_VAL)
> +		return S32_MIN;
> +
> +	val = (((((s32)(z - z4)) << 15) - ((((s32)z3) * ((s32)(((s16)rhall) -
> +	      ((s16)xyz1)))) >> 2)) / (z2 + ((s16)(((((s32)z1) *
> +	      ((((s16)rhall) << 1))) + (1 << 15)) >> 16))));
> +
> +	return val;
> +}
> +
> +static int bmc150_magn_read_xyz(struct bmc150_magn_data *data, s32 *buffer)
> +{
> +	int ret;
> +	__le16 values[AXIS_XYZR_MAX];
> +	s16 raw_x, raw_y, raw_z;
> +	u16 rhall;
> +	struct bmc150_magn_trim_regs tregs;
> +
> +	ret = regmap_bulk_read(data->regmap, BMC150_MAGN_REG_X_L,
> +			       values, sizeof(values));
> +	if (ret < 0)
> +		return ret;
> +
> +	raw_x = (s16)le16_to_cpu(values[AXIS_X]) >> BMC150_MAGN_SHIFT_XY_L;
> +	raw_y = (s16)le16_to_cpu(values[AXIS_Y]) >> BMC150_MAGN_SHIFT_XY_L;
> +	raw_z = (s16)le16_to_cpu(values[AXIS_Z]) >> BMC150_MAGN_SHIFT_Z_L;
> +	rhall = le16_to_cpu(values[RHALL]) >> BMC150_MAGN_SHIFT_RHALL_L;
> +
> +	ret = regmap_bulk_read(data->regmap, BMC150_MAGN_REG_TRIM_START,
> +			       &tregs, sizeof(tregs));
> +	if (ret < 0)
> +		return ret;
> +
> +	buffer[AXIS_X] = bmc150_magn_compensate_x(&tregs, raw_x, rhall);
> +	buffer[AXIS_Y] = bmc150_magn_compensate_y(&tregs, raw_y, rhall);
> +	buffer[AXIS_Z] = bmc150_magn_compensate_z(&tregs, raw_z, rhall);
> +
> +	return 0;
> +}
> +
> +static int bmc150_magn_read_raw(struct iio_dev *indio_dev,
> +				struct iio_chan_spec const *chan,
> +				int *val, int *val2, long mask)
> +{
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret;
> +	s32 values[AXIS_XYZ_MAX];
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (iio_buffer_enabled(indio_dev))
> +			return -EBUSY;
> +		mutex_lock(&data->mutex);
> +
> +		ret = bmc150_magn_set_power_state(data, true);
> +		if (ret < 0) {
> +			mutex_unlock(&data->mutex);
> +			return ret;
> +		}
> +
> +		ret = bmc150_magn_read_xyz(data, values);
> +		if (ret < 0) {
> +			bmc150_magn_set_power_state(data, false);
> +			mutex_unlock(&data->mutex);
> +			return ret;
> +		}
> +		*val = values[chan->scan_index];
> +
> +		ret = bmc150_magn_set_power_state(data, false);
> +		if (ret < 0) {
> +			mutex_unlock(&data->mutex);
> +			return ret;
> +		}
> +
> +		mutex_unlock(&data->mutex);
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		/*
> +		 * The API/driver performs an off-chip temperature
> +		 * compensation and outputs x/y/z magnetic field data in
> +		 * 16 LSB/uT to the upper application layer.
> +		 */
> +		*val = 0;
> +		*val2 = 625;
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		ret = bmc150_magn_get_odr(data, val);
> +		if (ret < 0)
> +			return ret;
> +		return IIO_VAL_INT;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int bmc150_magn_write_raw(struct iio_dev *indio_dev,
> +				 struct iio_chan_spec const *chan,
> +				 int val, int val2, long mask)
> +{
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		mutex_lock(&data->mutex);
> +		ret = bmc150_magn_set_odr(data, val);
> +		mutex_unlock(&data->mutex);
> +		return ret;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int bmc150_magn_validate_trigger(struct iio_dev *indio_dev,
> +					struct iio_trigger *trig)
> +{
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +
> +	if (data->dready_trig != trig)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("2 6 8 10 15 20 25 30");
> +
> +static struct attribute *bmc150_magn_attributes[] = {
> +	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group bmc150_magn_attrs_group = {
> +	.attrs = bmc150_magn_attributes,
> +};
> +
> +#define BMC150_MAGN_CHANNEL(_axis) {					\
> +	.type = IIO_MAGN,						\
> +	.modified = 1,							\
> +	.channel2 = IIO_MOD_##_axis,					\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) |	\
> +				    BIT(IIO_CHAN_INFO_SCALE),		\
> +	.scan_index = AXIS_##_axis,					\
> +	.scan_type = {							\
> +		.sign = 's',						\
> +		.realbits = 32,						\
> +		.storagebits = 32,					\
> +		.endianness = IIO_LE					\
> +	},								\
> +}
> +
> +static const struct iio_chan_spec bmc150_magn_channels[] = {
> +	BMC150_MAGN_CHANNEL(X),
> +	BMC150_MAGN_CHANNEL(Y),
> +	BMC150_MAGN_CHANNEL(Z),
> +	IIO_CHAN_SOFT_TIMESTAMP(3),
> +};
> +
> +static const struct iio_info bmc150_magn_info = {
> +	.attrs = &bmc150_magn_attrs_group,
> +	.read_raw = bmc150_magn_read_raw,
> +	.write_raw = bmc150_magn_write_raw,
> +	.validate_trigger = bmc150_magn_validate_trigger,
> +	.driver_module = THIS_MODULE,
> +};
> +
> +static const unsigned long bmc150_magn_scan_masks[] = {0x07, 0};
> +
> +static irqreturn_t bmc150_magn_trigger_handler(int irq, void *p)
> +{
> +	struct iio_poll_func *pf = p;
> +	struct iio_dev *indio_dev = pf->indio_dev;
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&data->mutex);
> +	ret = bmc150_magn_read_xyz(data, data->buffer);
> +	mutex_unlock(&data->mutex);
> +	if (ret < 0)
> +		goto err;
> +
> +	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
> +					   pf->timestamp);
> +
> +err:
> +	iio_trigger_notify_done(data->dready_trig);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int bmc150_magn_init(struct bmc150_magn_data *data)
> +{
> +	int ret, chip_id;
> +	struct bmc150_magn_preset preset;
> +
> +	ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND,
> +					 false);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev,
> +			"Failed to bring up device from suspend mode\n");
> +		return ret;
> +	}
> +
> +	ret = regmap_read(data->regmap, BMC150_MAGN_REG_CHIP_ID, &chip_id);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Failed reading chip id\n");
> +		goto err_poweroff;
> +	}
> +	if (chip_id != BMC150_MAGN_CHIP_ID_VAL) {
> +		dev_err(&data->client->dev, "Invalid chip id 0x%x\n", ret);
> +		ret = -ENODEV;
> +		goto err_poweroff;
> +	}
> +	dev_dbg(&data->client->dev, "Chip id %x\n", ret);
> +
> +	preset = bmc150_magn_presets_table[BMC150_MAGN_DEFAULT_PRESET];
> +	ret = bmc150_magn_set_odr(data, preset.odr);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Failed to set ODR to %d\n",
> +			preset.odr);
> +		goto err_poweroff;
> +	}
> +
> +	ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_XY,
> +			   BMC150_MAGN_REPXY_TO_REGVAL(preset.rep_xy));
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Failed to set REP XY to %d\n",
> +			preset.rep_xy);
> +		goto err_poweroff;
> +	}
> +
> +	ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_Z,
> +			   BMC150_MAGN_REPZ_TO_REGVAL(preset.rep_z));
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Failed to set REP Z to %d\n",
> +			preset.rep_z);
> +		goto err_poweroff;
> +	}
> +
> +	ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL,
> +					 true);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "Failed to power on device\n");
> +		goto err_poweroff;
> +	}
> +
> +	return 0;
> +
> +err_poweroff:
> +	bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true);
> +	return ret;
> +}
> +
> +static int bmc150_magn_reset_intr(struct bmc150_magn_data *data)
> +{
> +	int tmp;
> +
> +	/*
> +	 * Data Ready (DRDY) is always cleared after
> +	 * readout of data registers ends.
> +	 */
> +	return regmap_read(data->regmap, BMC150_MAGN_REG_X_L, &tmp);
> +}
> +
> +static int bmc150_magn_trig_try_reen(struct iio_trigger *trig)
> +{
> +	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	if (!data->dready_trigger_on)
> +		return 0;
> +
> +	mutex_lock(&data->mutex);
> +	ret = bmc150_magn_reset_intr(data);
> +	mutex_unlock(&data->mutex);
> +
> +	return ret;
> +}
> +
> +static int bmc150_magn_data_rdy_trigger_set_state(struct iio_trigger *trig,
> +						  bool state)
> +{
> +	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret = 0;
> +
> +	mutex_lock(&data->mutex);
> +	if (state == data->dready_trigger_on)
> +		goto err_unlock;
> +
> +	ret = bmc150_magn_set_power_state(data, state);
> +	if (ret < 0)
> +		goto err_unlock;
> +
> +	ret = regmap_update_bits(data->regmap, BMC150_MAGN_REG_INT_DRDY,
> +				 BMC150_MAGN_MASK_DRDY_EN,
> +				 state << BMC150_MAGN_SHIFT_DRDY_EN);
> +	if (ret < 0)
> +		goto err_poweroff;
> +
> +	data->dready_trigger_on = state;
> +
> +	if (state) {
> +		ret = bmc150_magn_reset_intr(data);
> +		if (ret < 0)
> +			goto err_poweroff;
> +	}
> +	mutex_unlock(&data->mutex);
> +
> +	return 0;
> +
> +err_poweroff:
> +	bmc150_magn_set_power_state(data, false);
> +err_unlock:
> +	mutex_unlock(&data->mutex);
> +	return ret;
> +}
> +
> +static const struct iio_trigger_ops bmc150_magn_trigger_ops = {
> +	.set_trigger_state = bmc150_magn_data_rdy_trigger_set_state,
> +	.try_reenable = bmc150_magn_trig_try_reen,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int bmc150_magn_gpio_probe(struct i2c_client *client)
> +{
> +	struct device *dev;
> +	struct gpio_desc *gpio;
> +	int ret;
> +
> +	if (!client)
> +		return -EINVAL;
> +
> +	dev = &client->dev;
> +
> +	/* data ready GPIO interrupt pin */
> +	gpio = devm_gpiod_get_index(dev, BMC150_MAGN_GPIO_INT, 0);
> +	if (IS_ERR(gpio)) {
> +		dev_err(dev, "ACPI GPIO get index failed\n");
> +		return PTR_ERR(gpio);
> +	}
> +
> +	ret = gpiod_direction_input(gpio);
> +	if (ret)
> +		return ret;
> +
> +	ret = gpiod_to_irq(gpio);
> +
> +	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
> +
> +	return ret;
> +}
> +
> +static const char *bmc150_magn_match_acpi_device(struct device *dev)
> +{
> +	const struct acpi_device_id *id;
> +
> +	id = acpi_match_device(dev->driver->acpi_match_table, dev);
> +	if (!id)
> +		return NULL;
> +
> +	return dev_name(dev);
> +}
> +
> +static int bmc150_magn_probe(struct i2c_client *client,
> +			     const struct i2c_device_id *id)
> +{
> +	struct bmc150_magn_data *data;
> +	struct iio_dev *indio_dev;
> +	const char *name = NULL;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	i2c_set_clientdata(client, indio_dev);
> +	data->client = client;
> +
> +	if (id)
> +		name = id->name;
> +	else if (ACPI_HANDLE(&client->dev))
> +		name = bmc150_magn_match_acpi_device(&client->dev);
> +	else
> +		return -ENOSYS;
> +
> +	mutex_init(&data->mutex);
> +	data->regmap = devm_regmap_init_i2c(client, &bmc150_magn_regmap_config);
> +	if (IS_ERR(data->regmap)) {
> +		dev_err(&client->dev, "Failed to allocate register map\n");
> +		return PTR_ERR(data->regmap);
> +	}
> +
> +	ret = bmc150_magn_init(data);
> +	if (ret < 0)
> +		return ret;
> +
> +	indio_dev->dev.parent = &client->dev;
> +	indio_dev->channels = bmc150_magn_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(bmc150_magn_channels);
> +	indio_dev->available_scan_masks = bmc150_magn_scan_masks;
> +	indio_dev->name = name;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &bmc150_magn_info;
> +
> +	if (client->irq <= 0)
> +		client->irq = bmc150_magn_gpio_probe(client);
> +
> +	if (client->irq > 0) {
> +		data->dready_trig = devm_iio_trigger_alloc(&client->dev,
> +							   "%s-dev%d",
> +							   indio_dev->name,
> +							   indio_dev->id);
> +		if (!data->dready_trig) {
> +			ret = -ENOMEM;
> +			dev_err(&client->dev, "iio trigger alloc failed\n");
> +			goto err_poweroff;
> +		}
> +
> +		data->dready_trig->dev.parent = &client->dev;
> +		data->dready_trig->ops = &bmc150_magn_trigger_ops;
> +		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
> +		ret = iio_trigger_register(data->dready_trig);
> +		if (ret) {
> +			dev_err(&client->dev, "iio trigger register failed\n");
> +			goto err_poweroff;
> +		}
> +
> +		ret = iio_triggered_buffer_setup(indio_dev,
> +						 &iio_pollfunc_store_time,
> +						 bmc150_magn_trigger_handler,
> +						 NULL);
> +		if (ret < 0) {
> +			dev_err(&client->dev,
> +				"iio triggered buffer setup failed\n");
> +			goto err_trigger_unregister;
> +		}
> +
> +		ret = request_threaded_irq(client->irq,
> +					   iio_trigger_generic_data_rdy_poll,
> +					   NULL,
> +					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> +					   BMC150_MAGN_IRQ_NAME,
> +					   data->dready_trig);
> +		if (ret < 0) {
> +			dev_err(&client->dev, "request irq %d failed\n",
> +				client->irq);
> +			goto err_buffer_cleanup;
> +		}
> +	}
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "unable to register iio device\n");
> +		goto err_free_irq;
> +	}
> +
> +	ret = pm_runtime_set_active(&client->dev);
> +	if (ret)
> +		goto err_iio_unregister;
> +
> +	pm_runtime_enable(&client->dev);
> +	pm_runtime_set_autosuspend_delay(&client->dev,
> +					 BMC150_MAGN_AUTO_SUSPEND_DELAY_MS);
> +	pm_runtime_use_autosuspend(&client->dev);
> +
> +	dev_dbg(&indio_dev->dev, "Registered device %s\n", name);
> +
> +	return 0;
> +
> +err_iio_unregister:
> +	iio_device_unregister(indio_dev);
> +err_free_irq:
> +	if (client->irq > 0)
> +		free_irq(client->irq, data->dready_trig);
> +err_buffer_cleanup:
> +	if (data->dready_trig)
> +		iio_triggered_buffer_cleanup(indio_dev);
> +err_trigger_unregister:
> +	if (data->dready_trig)
> +		iio_trigger_unregister(data->dready_trig);
> +err_poweroff:
> +	bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true);
> +	return ret;
> +}
> +
> +static int bmc150_magn_remove(struct i2c_client *client)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +
> +	pm_runtime_disable(&client->dev);
> +	pm_runtime_set_suspended(&client->dev);
> +	pm_runtime_put_noidle(&client->dev);
> +
> +	iio_device_unregister(indio_dev);
> +
> +	if (client->irq > 0)
> +		free_irq(data->client->irq, data->dready_trig);
> +
> +	if (data->dready_trig) {
> +		iio_triggered_buffer_cleanup(indio_dev);
> +		iio_trigger_unregister(data->dready_trig);
> +	}
> +
> +	mutex_lock(&data->mutex);
> +	bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true);
> +	mutex_unlock(&data->mutex);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int bmc150_magn_runtime_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&data->mutex);
> +	ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SLEEP,
> +					 true);
> +	mutex_unlock(&data->mutex);
> +	if (ret < 0) {
> +		dev_err(&data->client->dev, "powering off device failed\n");
> +		return ret;
> +	}
> +	return 0;
> +}
> +
> +static int bmc150_magn_runtime_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +
> +	return bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL,
> +					  true);
> +}
> +#endif
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int bmc150_magn_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&data->mutex);
> +	ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SLEEP,
> +					 true);
> +	mutex_unlock(&data->mutex);
> +
> +	return ret;
> +}
> +
> +static int bmc150_magn_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> +	struct bmc150_magn_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&data->mutex);
> +	ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL,
> +					 true);
> +	mutex_unlock(&data->mutex);
> +
> +	return ret;
> +}
> +#endif
> +
> +static const struct dev_pm_ops bmc150_magn_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(bmc150_magn_suspend, bmc150_magn_resume)
> +	SET_RUNTIME_PM_OPS(bmc150_magn_runtime_suspend,
> +			   bmc150_magn_runtime_resume, NULL)
> +};
> +
> +static const struct acpi_device_id bmc150_magn_acpi_match[] = {
> +	{"BMC150B", 0},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match);
> +
> +static const struct i2c_device_id bmc150_magn_id[] = {
> +	{"bmc150_magn", 0},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(i2c, bmc150_magn_id);
> +
> +static struct i2c_driver bmc150_magn_driver = {
> +	.driver = {
> +		   .name = BMC150_MAGN_DRV_NAME,
> +		   .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match),
> +		   .pm = &bmc150_magn_pm_ops,
> +		   },
> +	.probe = bmc150_magn_probe,
> +	.remove = bmc150_magn_remove,
> +	.id_table = bmc150_magn_id,
> +};
> +module_i2c_driver(bmc150_magn_driver);
> +
> +MODULE_AUTHOR("Irina Tirdea <irina.tirdea@xxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMC150 magnetometer driver");
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux