On 13/04/15 16:40, Irina Tirdea wrote: > Initial value of gpio bitnum is set to -1, but > the variable is declared as unsigned. > > Use a positive invalid value for initial gpio > bitnum. > > Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx> > Suggested-by: Hartmut Knaack <knaack.h@xxxxxx> Applied. I thought about adding this to the fixes-togreg branch but got lazy and added it to the togreg one instead. J > --- > drivers/iio/accel/mma9553.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c > index 9573147..5755977 100644 > --- a/drivers/iio/accel/mma9553.c > +++ b/drivers/iio/accel/mma9553.c > @@ -78,6 +78,7 @@ > > /* Bitnum used for GPIO configuration = bit number in high status byte */ > #define MMA9553_STATUS_TO_BITNUM(bit) (ffs(bit) - 9) > +#define MMA9553_MAX_BITNUM MMA9553_STATUS_TO_BITNUM(BIT(16)) > > #define MMA9553_DEFAULT_SAMPLE_RATE 30 /* Hz */ > > @@ -404,8 +405,8 @@ static int mma9553_init(struct mma9553_data *data) > } > > > - data->gpio_bitnum = -1; > /* Reset GPIO */ > + data->gpio_bitnum = MMA9553_MAX_BITNUM; > ret = mma9553_conf_gpio(data); > if (ret < 0) > return ret; > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
