On 13/04/15 16:40, Irina Tirdea wrote:
> When setting the activity period, the value introduced by
> the user in sysfs is not checked for validity.
>
> Add a boundary check so that only allowed values are
> reported as successfully written to device.
>
> Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
> Reported-by: Hartmut Knaack <knaack.h@xxxxxx>
hmm. Not that critical as it just gives miss information to
userspace that is writing an incorrect value. Still it's small
so I've taken it in the fixes-togreg branch.
Thanks,
Jonathan
> ---
> drivers/iio/accel/mma9553.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
> index 607dbfc..03120fb 100644
> --- a/drivers/iio/accel/mma9553.c
> +++ b/drivers/iio/accel/mma9553.c
> @@ -54,6 +54,7 @@
> #define MMA9553_MASK_CONF_STEPCOALESCE GENMASK(7, 0)
>
> #define MMA9553_REG_CONF_ACTTHD 0x0E
> +#define MMA9553_MAX_ACTTHD GENMASK(15, 0)
>
> /* Pedometer status registers (R-only) */
> #define MMA9553_REG_STATUS 0x00
> @@ -869,6 +870,9 @@ static int mma9553_write_event_value(struct iio_dev *indio_dev,
> case IIO_EV_INFO_PERIOD:
> switch (chan->type) {
> case IIO_ACTIVITY:
> + if (val < 0 || val > MMA9553_ACTIVITY_THD_TO_SEC(
> + MMA9553_MAX_ACTTHD))
> + return -EINVAL;
> mutex_lock(&data->mutex);
> ret = mma9553_set_config(data, MMA9553_REG_CONF_ACTTHD,
> &data->conf.actthd,
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
