Add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors. Signed-off-by: Tomasz Duszynski <tduszyns@xxxxxxxxx> --- drivers/iio/light/Kconfig | 10 ++ drivers/iio/light/Makefile | 1 + drivers/iio/light/bh1750.c | 322 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 333 insertions(+) create mode 100644 drivers/iio/light/bh1750.c diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 5a3237b..9fb79ca 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -37,6 +37,16 @@ config APDS9300 To compile this driver as a module, choose M here: the module will be called apds9300. +config BH1750 + tristate "BH1750 ambient light sensor" + depends on I2C + help + Say Y here to build support for the BH1710, BH1715, BH1721, + BH1750, BH1751 ambient light sensors. + + To compile this driver as a module, choose M here: the module will + be called bh1750. + config CM32181 depends on I2C tristate "CM32181 driver" diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index 74656c1..1a13184 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_ADJD_S311) += adjd_s311.o obj-$(CONFIG_AL3320A) += al3320a.o obj-$(CONFIG_APDS9300) += apds9300.o +obj-$(CONFIG_BH1750) += bh1750.o obj-$(CONFIG_CM32181) += cm32181.o obj-$(CONFIG_CM36651) += cm36651.o obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c new file mode 100644 index 0000000..83b5413 --- /dev/null +++ b/drivers/iio/light/bh1750.c @@ -0,0 +1,322 @@ +/* + * ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@xxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Data sheets: + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1710fvc-e.pdf + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1715fvc-e.pdf + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1721fvc-e.pdf + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1751fvi-e.pdf + * + * 7-bit I2C slave addresses: + * 0x23 (ADDR pin low) + * 0x5C (ADDR pin high) + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/module.h> + +#define BH1750_POWER_DOWN 0x00 +#define BH1750_H_RES_MODE 0x10 /* auto-mode for BH1721 */ +#define BH1750_CHANGE_INT_TIME_H_BIT 0x40 +#define BH1750_CHANGE_INT_TIME_L_BIT 0x60 + +enum { + BH1710, + BH1715, + BH1721, + BH1750, + BH1751 +}; + +struct bh1750_chip_info { + int id; + int mtreg_min; + int mtreg_max; + int mtreg_default; + int mtreg_to_usec; + int mtreg_to_scale; +}; + +struct bh1750_data { + struct i2c_client *client; + struct mutex lock; + const struct bh1750_chip_info *chip_info; + u16 mtreg; +}; + +static const struct bh1750_chip_info chip_info_tbl[] = { + [BH1710] = { BH1710, 140, 1022, 300, 400, 4000 }, + [BH1715] = { BH1715, 31, 254, 69, 1740, 17391 }, + [BH1721] = { BH1721, 140, 1020, 300, 400, 4000 }, + [BH1750] = { BH1750, 31, 254, 69, 1740, 17391 }, + [BH1751] = { BH1751, 31, 254, 69, 1740, 17391 } +}; + +static int bh1750_change_int_time(struct bh1750_data *data, int usec) +{ + int ret, val; + u8 low = 0, high = 0; + const struct bh1750_chip_info *chip_info = data->chip_info; + + if ((usec % chip_info->mtreg_to_usec) != 0) + return -EINVAL; + + val = usec / chip_info->mtreg_to_usec; + if (val < chip_info->mtreg_min || val > chip_info->mtreg_max) + return -EINVAL; + + switch (chip_info->id) { + case BH1710: + low = val & 0x001F; + high = (val & 0x03E0) >> 5; + break; + case BH1721: + low = val & 0x0010; + high = (val & 0x03E0) >> 5; + case BH1715: + case BH1750: + case BH1751: + low = val & 0x001F; + high = (val & 0x00E0) >> 5; + break; + } + + ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte(data->client, + BH1750_CHANGE_INT_TIME_H_BIT | high); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte(data->client, + BH1750_CHANGE_INT_TIME_L_BIT | low); + if (ret < 0) + return ret; + + data->mtreg = val; + + return i2c_smbus_write_byte(data->client, BH1750_H_RES_MODE); +} + +static int bh1750_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + u16 result; + int ret, tmp; + unsigned long delay; + struct bh1750_data *data = iio_priv(indio_dev); + const struct bh1750_chip_info *chip_info = data->chip_info; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_INTENSITY: + delay = chip_info->mtreg_to_usec * data->mtreg; + mutex_lock(&data->lock); + usleep_range(delay, delay + 20000); + ret = i2c_master_recv(data->client, + (char *)&result, 2); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + *val = swab16(result); + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + tmp = chip_info->mtreg_to_scale * data->mtreg; + *val = tmp / 1000000; + *val2 = tmp % 1000000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = chip_info->mtreg_to_usec * data->mtreg; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int bh1750_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret; + struct bh1750_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + if (val != 0) + return -EINVAL; + + mutex_lock(&data->lock); + ret = bh1750_change_int_time(data, val2); + mutex_unlock(&data->lock); + return ret; + default: + return -EINVAL; + } +} + +static ssize_t bh1750_show_int_time_available(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int i, inc; + size_t len = 0; + struct bh1750_data *data = iio_priv(dev_to_iio_dev(dev)); + const struct bh1750_chip_info *chip_info = data->chip_info; + + switch (chip_info->id) { + case BH1710: + case BH1721: + /* All values won't fit into one page, so display every + * second one. By doing so step size is increased + * from 0.4ms to 0.8ms.*/ + inc = 2; + break; + default: + inc = 1; + break; + } + + for (i = chip_info->mtreg_min; i <= chip_info->mtreg_max; i += inc) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ", + i * chip_info->mtreg_to_usec); + + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_INT_TIME_AVAIL(bh1750_show_int_time_available); + +static struct attribute *bh1750_attributes[] = { + &iio_dev_attr_integration_time_available.dev_attr.attr, + NULL, +}; + +static struct attribute_group bh1750_attribute_group = { + .attrs = bh1750_attributes, +}; + +static const struct iio_info bh1750_info = { + .driver_module = THIS_MODULE, + .attrs = &bh1750_attribute_group, + .read_raw = bh1750_read_raw, + .write_raw = bh1750_write_raw, +}; + +static const struct iio_chan_spec bh1750_channels[] = { + { + .type = IIO_INTENSITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_INT_TIME) + } +}; + +static int bh1750_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret, usec; + struct bh1750_data *data; + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | + I2C_FUNC_SMBUS_WRITE_BYTE)) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + data->chip_info = &chip_info_tbl[id->driver_data]; + + usec = data->chip_info->mtreg_to_usec * data->chip_info->mtreg_default; + ret = bh1750_change_int_time(data, usec); + if (ret < 0) + return ret; + + mutex_init(&data->lock); + indio_dev->dev.parent = &client->dev; + indio_dev->info = &bh1750_info; + indio_dev->name = id->name; + indio_dev->channels = bh1750_channels; + indio_dev->num_channels = ARRAY_SIZE(bh1750_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +#ifdef CONFIG_PM_SLEEP +static int bh1750_suspend(struct device *dev) +{ + int ret; + struct bh1750_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + mutex_lock(&data->lock); + ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); + mutex_unlock(&data->lock); + + return ret; +} + +static int bh1750_resume(struct device *dev) +{ + struct bh1750_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return i2c_smbus_write_byte(data->client, BH1750_H_RES_MODE); +} + +static SIMPLE_DEV_PM_OPS(bh1750_pm_ops, bh1750_suspend, bh1750_resume); +#define BH1750_PM_OPS (&bh1750_pm_ops) +#else +#define BH1750_PM_OPS NULL +#endif + +static const struct i2c_device_id bh1750_id[] = { + { "bh1710", BH1710 }, + { "bh1715", BH1715 }, + { "bh1721", BH1721 }, + { "bh1750", BH1750 }, + { "bh1751", BH1751 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bh1750_id); + +static struct i2c_driver bh1750_driver = { + .driver = { + .name = "bh1750", + .owner = THIS_MODULE, + .pm = BH1750_PM_OPS, + }, + .probe = bh1750_probe, + .id_table = bh1750_id, + +}; +module_i2c_driver(bh1750_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@xxxxxxxxx>"); +MODULE_DESCRIPTION("ROHM BH1710/BH1715/BH1721/BH1750/BH1751 als driver"); +MODULE_LICENSE("GPL v2"); -- 2.3.5 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
