On 12/04/15 18:09, Vlad Dogaru wrote:
> Signed-off-by: Vlad Dogaru <vlad.dogaru@xxxxxxxxx>
Applied with the define name changed as mentioned earlier...
J
> ---
> drivers/iio/proximity/sx9500.c | 27 ++++++++++-----------------
> 1 file changed, 10 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
> index f0f65a7..72efbbc 100644
> --- a/drivers/iio/proximity/sx9500.c
> +++ b/drivers/iio/proximity/sx9500.c
> @@ -859,30 +859,24 @@ static int sx9500_init_device(struct iio_dev *indio_dev)
> return 0;
> }
>
> -static int sx9500_gpio_probe(struct i2c_client *client,
> - struct sx9500_data *data)
> +static void sx9500_gpio_probe(struct i2c_client *client,
> + struct sx9500_data *data)
> {
> struct device *dev;
> struct gpio_desc *gpio;
> - int ret;
>
> if (!client)
> - return -EINVAL;
> + return;
>
> dev = &client->dev;
>
> - /* data ready gpio interrupt pin */
> - gpio = devm_gpiod_get_index(dev, SX9500_GPIO_NAME, 0, GPIOD_IN);
> - if (IS_ERR(gpio)) {
> - dev_err(dev, "acpi gpio get index failed\n");
> - return PTR_ERR(gpio);
> + if (client->irq <= 0) {
> + gpio = devm_gpiod_get_index(dev, SX9500_GPIO_INT, 0, GPIOD_IN);
> + if (IS_ERR(gpio))
> + dev_err(dev, "gpio get irq failed\n");
> + else
> + client->irq = gpiod_to_irq(gpio);
> }
> -
> - ret = gpiod_to_irq(gpio);
> -
> - dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
> -
> - return ret;
> }
>
> static int sx9500_probe(struct i2c_client *client,
> @@ -916,8 +910,7 @@ static int sx9500_probe(struct i2c_client *client,
> indio_dev->modes = INDIO_DIRECT_MODE;
> i2c_set_clientdata(client, indio_dev);
>
> - if (client->irq <= 0)
> - client->irq = sx9500_gpio_probe(client, data);
> + sx9500_gpio_probe(client, data);
>
> if (client->irq <= 0)
> dev_warn(&client->dev, "no valid irq found\n");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
