[PATCH] iio:tsl2563: Use tsl2563_ prefix for driver's functions

[Peter Meerwald <pmeerw@xxxxxxxxxx>]

just cleanup, no functional change

Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx>
---
 drivers/iio/light/tsl2563.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index 94daa9f..8166944 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -240,7 +240,7 @@ static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
  * convert between normalized values and HW values obtained using given
  * timing and gain settings.
  */
-static int adc_shiftbits(u8 timing)
+static int tsl2563_adc_shiftbits(u8 timing)
 {
 	int shift = 0;
 
@@ -263,9 +263,9 @@ static int adc_shiftbits(u8 timing)
 }
 
 /* Convert a HW ADC value to normalized scale. */
-static u32 normalize_adc(u16 adc, u8 timing)
+static u32 tsl2563_normalize_adc(u16 adc, u8 timing)
 {
-	return adc << adc_shiftbits(timing);
+	return adc << tsl2563_adc_shiftbits(timing);
 }
 
 static void tsl2563_wait_adc(struct tsl2563_chip *chip)
@@ -350,8 +350,8 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
 		retry = tsl2563_adjust_gainlevel(chip, adc0);
 	}
 
-	chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
-	chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
+	chip->data0 = tsl2563_normalize_adc(adc0, chip->gainlevel->gaintime);
+	chip->data1 = tsl2563_normalize_adc(adc1, chip->gainlevel->gaintime);
 
 	if (!chip->int_enabled)
 		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
@@ -361,13 +361,13 @@ out:
 	return ret;
 }
 
-static inline int calib_to_sysfs(u32 calib)
+static inline int tsl2563_calib_to_sysfs(u32 calib)
 {
 	return (int) (((calib * CALIB_BASE_SYSFS) +
 		       CALIB_FRAC_HALF) >> CALIB_FRAC_BITS);
 }
 
-static inline u32 calib_from_sysfs(int value)
+static inline u32 tsl2563_calib_from_sysfs(int value)
 {
 	return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
 }
@@ -426,7 +426,7 @@ static const struct tsl2563_lux_coeff lux_table[] = {
 };
 
 /* Convert normalized, scaled ADC values to lux. */
-static unsigned int adc_to_lux(u32 adc0, u32 adc1)
+static unsigned int tsl2563_adc_to_lux(u32 adc0, u32 adc1)
 {
 	const struct tsl2563_lux_coeff *lp = lux_table;
 	unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
@@ -442,7 +442,7 @@ static unsigned int adc_to_lux(u32 adc0, u32 adc1)
 }
 
 /* Apply calibration coefficient to ADC count. */
-static u32 calib_adc(u32 adc, u32 calib)
+static u32 tsl2563_calib_adc(u32 adc, u32 calib)
 {
 	unsigned long scaled = adc;
 
@@ -463,9 +463,9 @@ static int tsl2563_write_raw(struct iio_dev *indio_dev,
 	if (mask != IIO_CHAN_INFO_CALIBSCALE)
 		return -EINVAL;
 	if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
-		chip->calib0 = calib_from_sysfs(val);
+		chip->calib0 = tsl2563_calib_from_sysfs(val);
 	else if (chan->channel2 == IIO_MOD_LIGHT_IR)
-		chip->calib1 = calib_from_sysfs(val);
+		chip->calib1 = tsl2563_calib_from_sysfs(val);
 	else
 		return -EINVAL;
 
@@ -491,11 +491,11 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 			ret = tsl2563_get_adc(chip);
 			if (ret)
 				goto error_ret;
-			calib0 = calib_adc(chip->data0, chip->calib0) *
+			calib0 = tsl2563_calib_adc(chip->data0, chip->calib0) *
 				chip->cover_comp_gain;
-			calib1 = calib_adc(chip->data1, chip->calib1) *
+			calib1 = tsl2563_calib_adc(chip->data1, chip->calib1) *
 				chip->cover_comp_gain;
-			*val = adc_to_lux(calib0, calib1);
+			*val = tsl2563_adc_to_lux(calib0, calib1);
 			ret = IIO_VAL_INT;
 			break;
 		case IIO_INTENSITY:
@@ -515,9 +515,9 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 
 	case IIO_CHAN_INFO_CALIBSCALE:
 		if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
-			*val = calib_to_sysfs(chip->calib0);
+			*val = tsl2563_calib_to_sysfs(chip->calib0);
 		else
-			*val = calib_to_sysfs(chip->calib1);
+			*val = tsl2563_calib_to_sysfs(chip->calib1);
 		ret = IIO_VAL_INT;
 		break;
 	default:
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html