Re: [PATCH 2/2] iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 31/03/15 12:12, Vignesh R wrote:
> Add optional DT properties to set open delay, sample delay and number
> of averages per sample for each adc step. Open delay, sample delay
> and averaging are some of the parameters that affect the sampling rate
> and accuracy of the sample. Making these parameters configurable via
> DT will help in balancing speed vs accuracy.
> 
> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
All looks fine to me, but I would ideally like a devicetree
ack on this one.

Jonathan
> ---
>  .../bindings/input/touchscreen/ti-tsc-adc.txt      | 24 ++++++++++
>  drivers/iio/adc/ti_am335x_adc.c                    | 54 +++++++++++++++++++---
>  2 files changed, 72 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> index 6c4fb34823d3..8aafbe87f0eb 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> @@ -42,6 +42,27 @@ Optional properties:
>  			 hardware knob for adjusting the amount of "settling
>  			 time".
>  
> +- child "adc"
> +	ti,chan-step-opendelay: List of open delays for each channel of
> +				ADC in the order of ti,adc-channels. The
> +				value corresponds to the number of ADC
> +				clock cycles to wait after applying the
> +				step configuration registers and before
> +				sending the start of ADC conversion.
> +				Maximum value is 0x3FFFF.
> +       ti,chan-step-sampledelay: List of sample delays for each channel
> +				  of ADC in the order of ti,adc-channels.
> +				  The value corresponds to the number of
> +				  ADC clock cycles to sample (to hold
> +				  start of conversion high).
> +				  Maximum value is 0xFF.
> +       ti,chan-step-avg: Number of averages to be performed for each
> +			  channel of ADC. If average is 16 then input
> +			  is sampled 16 times and averaged to get more
> +			  accurate value. This increases the time taken
> +			  by ADC to generate a sample. Valid range is 0
> +			  average to 16 averages. Maximum value is 16.
> +
>  Example:
>  	tscadc: tscadc@44e0d000 {
>  		compatible = "ti,am3359-tscadc";
> @@ -55,5 +76,8 @@ Example:
>  
>  		adc {
>  			ti,adc-channels = <4 5 6 7>;
> +			ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
> +			ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
> +			ti,chan-step-avg = <16 2 4 8>;
>  		};
>  	}
> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> index 2f818405ffbe..5ee597b4a1af 100644
> --- a/drivers/iio/adc/ti_am335x_adc.c
> +++ b/drivers/iio/adc/ti_am335x_adc.c
> @@ -37,6 +37,7 @@ struct tiadc_device {
>  	u8 channel_step[8];
>  	int buffer_en_ch_steps;
>  	u16 data[8];
> +	u32 open_delay[8], sample_delay[8], step_avg[8];
>  };
>  
>  static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
> @@ -85,6 +86,7 @@ static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
>  static void tiadc_step_config(struct iio_dev *indio_dev)
>  {
>  	struct tiadc_device *adc_dev = iio_priv(indio_dev);
> +	struct device *dev = adc_dev->mfd_tscadc->dev;
>  	unsigned int stepconfig;
>  	int i, steps = 0;
>  
> @@ -98,20 +100,47 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
>  	 * needs to be given to ADC to digitalize data.
>  	 */
>  
> -	if (iio_buffer_enabled(indio_dev))
> -		stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
> -					| STEPCONFIG_MODE_SWCNT;
> -	else
> -		stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
>  
>  	for (i = 0; i < adc_dev->channels; i++) {
>  		int chan;
>  
>  		chan = adc_dev->channel_line[i];
> +
> +		if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
> +			dev_warn(dev, "chan %d step_avg truncating to %d\n",
> +				 chan, STEPCONFIG_AVG_16);
> +			adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
> +		}
> +
> +		if (adc_dev->step_avg[i])
> +			stepconfig =
> +			STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
> +			STEPCONFIG_FIFO1;
> +		else
> +			stepconfig = STEPCONFIG_FIFO1;
> +
> +		if (iio_buffer_enabled(indio_dev))
> +			stepconfig |= STEPCONFIG_MODE_SWCNT;
> +
>  		tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
>  				stepconfig | STEPCONFIG_INP(chan));
> +
> +		if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK)alue corresponds to the number of ADC
> +				clock cycles to wait after applying the
> +				step configuration registers and before
> +				sending the start of ADC conversion.
> +				Maximum value is 0x3FFFF.
> +       ti,chan-step-sampledelay: List of sample delays for each channel
> +				  of ADC in the order of ti,adc-channels.
> +				  The value corresponds to the number of
> +				  ADC clock cycles to sample (to hold
> +				  start of conversion high).
> +				  Maximum value is 0xFF.
> +       ti,chan-step-avg: Number of averages to be performed for each
> +			  channel of ADC. If average is 16 then input
> +			  is sampled 16 times and averaged to get more
> +			  accurate value. This increases the time taken
> +			  by ADC to generate a sample. Valid range is 0
> +			  average to 16 averages. Maximum value is 16. {
> +			dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",
> +				 chan);
> +			adc_dev->open_delay[i] = STEPDELAY_OPEN_MASK;
> +		}
> +
> +		if (adc_dev->sample_delay[i] > 0xFF) {
> +			dev_warn(dev, "chan %d sample delay truncating to 0xFF\n",
> +				 chan);
> +			adc_dev->sample_delay[i] = 0xFF;
> +		}
> +
>  		tiadc_writel(adc_dev, REG_STEPDELAY(steps),
> -				STEPCONFIG_OPENDLY);
> +				STEPDELAY_OPEN(adc_dev->open_delay[i]) |
> +				STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
> +
>  		adc_dev->channel_step[i] = steps;
>  		steps++;
>  	}
> @@ -407,9 +436,22 @@ static int tiadc_parse_dt(struct platform_device *pdev,
>  
>  	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
>  		adc_dev->channel_line[channels] = val;
> +
> +		/* Set Default values for optional DT parameters */
> +		adc_dev->open_delay[channels] = STEPCONFIG_OPENDLY;
> +		adc_dev->sample_delay[channels] = STEPCONFIG_SAMPLEDLY;
> +		adc_dev->step_avg[channels] = 16;
> +
>  		channels++;
>  	}
>  
> +	of_property_read_u32_array(node, "ti,chan-step-avg",
> +				   adc_dev->step_avg, channels);
> +	of_property_read_u32_array(node, "ti,chan-step-opendelay",
> +				   adc_dev->open_delay, channels);
> +	of_property_read_u32_array(node, "ti,chan-step-sampledelay",
> +				   adc_dev->sample_delay, channels);
> +
>  	adc_dev->channels = channels;
>  	return 0;
>  }
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux