Initial value of gpio bitnum is set to -1, but the variable is declared as unsigned. Use a positive invalid value for initial gpio bitnum. Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx> Suggested-by: Hartmut Knaack <knaack.h@xxxxxx> --- drivers/iio/accel/mma9553.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 9cfedb5..d781999 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -78,6 +78,7 @@ /* Bitnum used for GPIO configuration = bit number in high status byte */ #define MMA9553_STATUS_TO_BITNUM(bit) (ffs(bit) - 9) +#define MMA9553_MAX_BITNUM MMA9553_STATUS_TO_BITNUM(BIT(16)) #define MMA9553_DEFAULT_SAMPLE_RATE 30 /* Hz */ @@ -406,8 +407,8 @@ static int mma9553_init(struct mma9553_data *data) } - data->gpio_bitnum = -1; /* Reset GPIO */ + data->gpio_bitnum = MMA9553_MAX_BITNUM; ret = mma9553_conf_gpio(data); if (ret < 0) return ret; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
