> m62332 is a simple 2-channel DAC used on several Sharp Zaurus boards to
> control LCD voltage, backlight and sound. The driver use regulators to
> control the reference voltage and enabling/disabling the DAC.
some minor comments inline
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
> ---
> drivers/iio/dac/Kconfig | 10 ++
> drivers/iio/dac/Makefile | 1 +
> drivers/iio/dac/m62332.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 247 insertions(+)
> create mode 100644 drivers/iio/dac/m62332.c
>
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index 2236ea2..2ede061 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -142,6 +142,16 @@ config AD7303
> To compile this driver as module choose M here: the module will be called
> ad7303.
>
> +config M62332
> + tristate "Mitsubishi M62332 DAC driver"
> + depends on I2C
> + help
> + If you say yes here you get support for the Mitsubishi M62332
> + (I2C 8-Bit DACs with rail-to-rail outputs).
> +
> + This driver can also be built as a module. If so, the module
> + will be called m62332.
> +
> config MAX517
> tristate "Maxim MAX517/518/519 DAC driver"
> depends on I2C
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index 52be7e1..63ae056 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_AD5764) += ad5764.o
> obj-$(CONFIG_AD5791) += ad5791.o
> obj-$(CONFIG_AD5686) += ad5686.o
> obj-$(CONFIG_AD7303) += ad7303.o
> +obj-$(CONFIG_M62332) += m62332.o
> obj-$(CONFIG_MAX517) += max517.o
> obj-$(CONFIG_MAX5821) += max5821.o
> obj-$(CONFIG_MCP4725) += mcp4725.o
> diff --git a/drivers/iio/dac/m62332.c b/drivers/iio/dac/m62332.c
> new file mode 100644
> index 0000000..90574d7
> --- /dev/null
> +++ b/drivers/iio/dac/m62332.c
> @@ -0,0 +1,236 @@
> +/*
> + * m62332.c - Support for Mitsubishi m62332 DAC
> + *
> + * Copyright (c) 2014 Dmitry Eremin-Solenikov
> + *
> + * Based on max517 driver:
> + * Copyright (C) 2010, 2011 Roland Stigge <stigge@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/jiffies.h>
is jiffies.h needed?
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/driver.h>
> +
> +#include <linux/regulator/consumer.h>
> +
> +struct m62332_data {
> + struct i2c_client *client;
> + unsigned short vref_mv;
> + unsigned char raw[2];
could use u8, u16
> + struct regulator *vcc;
> +#ifdef CONFIG_PM_SLEEP
> + unsigned char save[2];
> +#endif
> +};
> +
> +static int m62332_set_value(struct iio_dev *indio_dev,
> + unsigned char val, int channel)
> +{
> + struct m62332_data *data = iio_priv(indio_dev);
> + struct i2c_client *client = data->client;
> + u8 outbuf[2];
> + int res = 0;
> +
> + if (val == data->raw[channel])
> + return 0;
> +
> + outbuf[0] = channel;
> + outbuf[1] = val;
> +
probably use a mutex here to protect the enable/send/disable sequence
> + if (val || data->raw[!channel])
!channel looks a bit strange; what is the intent here?
is data->raw[!channel] needed?
maybe there exist devices with more than 2 channels so a function like
all_channels_off() would make sense
> + res = regulator_enable(data->vcc);
> + if (res)
> + return res;
> +
> + res = i2c_master_send(client, outbuf, 2);
> + if (res < 0)
> + return res;
> + else if (res != 2)
> + return -EIO;
> +
should the regulator be disabled if write fails?
> + data->raw[channel] = val;
> +
> + if (!data->raw[0] && !data->raw[1])
> + regulator_disable(data->vcc);
> +
> + return 0;
> +}
> +
> +static int m62332_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val,
> + int *val2,
> + long m)
> +{
> + struct m62332_data *data = iio_priv(indio_dev);
> +
> + switch (m) {
> + case IIO_CHAN_INFO_SCALE:
> + /* Corresponds to Vref / 2^(bits) */
> + *val = data->vref_mv;
> + *val2 = 8;
> + return IIO_VAL_FRACTIONAL_LOG2;
> + case IIO_CHAN_INFO_RAW:
> + *val = data->raw[chan->channel];
> + return IIO_VAL_INT;
> + default:
> + break;
> + }
> + return -EINVAL;
> +}
> +
> +static int m62332_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2, long mask)
> +{
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + if (val < 0 || val > 255)
> + return -EINVAL;
> +
> + ret = m62332_set_value(indio_dev, val, chan->channel);
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int m62332_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct m62332_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + data->save[0] = data->raw[0];
> + data->save[1] = data->raw[1];
> +
> + ret = m62332_set_value(indio_dev, 0, 0);
> + if (ret < 0)
> + return ret;
> +
> + return m62332_set_value(indio_dev, 0, 1);
> +}
> +
> +static int m62332_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct m62332_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + ret = m62332_set_value(indio_dev, data->save[0], 0);
> + if (ret < 0)
> + return ret;
> +
> + return m62332_set_value(indio_dev, data->save[1], 1);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(m62332_pm_ops, m62332_suspend, m62332_resume);
> +#define M62332_PM_OPS (&m62332_pm_ops)
> +#else
> +#define M62332_PM_OPS NULL
> +#endif
> +
> +static const struct iio_info m62332_info = {
> + .read_raw = m62332_read_raw,
> + .write_raw = m62332_write_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +#define M62332_CHANNEL(chan) { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .output = 1, \
> + .channel = (chan), \
> + .datasheet_name = "CH" #chan, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE), \
> +}
> +
> +static const struct iio_chan_spec m62332_channels[] = {
> + M62332_CHANNEL(0),
> + M62332_CHANNEL(1)
> +};
> +
> +static int m62332_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct m62332_data *data;
> + struct iio_dev *indio_dev;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + data->vcc = devm_regulator_get(&client->dev, "VCC");
> + if (IS_ERR(data->vcc))
> + return PTR_ERR(data->vcc);
> +
> + /* establish that the iio_dev is a child of the i2c device */
> + indio_dev->dev.parent = &client->dev;
> +
indio_dev->name?
> + indio_dev->num_channels = 2;
> + indio_dev->channels = m62332_channels;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->info = &m62332_info;
> +
> + data->vref_mv = regulator_get_voltage(data->vcc) / 1000; /* mV */
> +
> + iio_map_array_register(indio_dev, client->dev.platform_data);
check return code?
> +
> + return iio_device_register(indio_dev);
> +}
> +
> +static int m62332_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +
> + iio_device_unregister(indio_dev);
> + iio_map_array_unregister(indio_dev);
> + return 0;
> +}
> +
> +static const struct i2c_device_id m62332_id[] = {
> + { "m62332", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, m62332_id);
> +
> +static struct i2c_driver m62332_driver = {
> + .driver = {
> + .name = "m62332",
> + .pm = M62332_PM_OPS,
> + },
> + .probe = m62332_probe,
> + .remove = m62332_remove,
> + .id_table = m62332_id,
> +};
> +module_i2c_driver(m62332_driver);
> +
> +MODULE_AUTHOR("Dmitry Eremin-Solenikov");
> +MODULE_DESCRIPTION("M62332 8-bit DAC");
> +MODULE_LICENSE("GPL v2");
>
--
Peter Meerwald
+43-664-2444418 (mobile)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
