Respect ADC clocking limitations which lead to bogous reading on 500MHz clocked Vybrid SoC's. Additionally, also implement a sysfs-property to configure the conversion mode available in this ADC peripherial. The clock limitations are specified using the device tree, hence I seek an Ack from the device tree maintainers here... Changes since v3: - Move device tree bindings to driver changes Changes since v2: - Add sysfs ABI documentation - Fix commit message spelling errors Changes since v1: - Use ext_info for conversion mode Stefan Agner (3): iio: adc: vf610: use ADC clock within specification iio: adc: vf610: implement configurable conversion modes ARM: dts: add property for maximum ADC clock frequencies Documentation/ABI/testing/sysfs-bus-iio-vf610 | 7 + .../devicetree/bindings/iio/adc/vf610-adc.txt | 9 + arch/arm/boot/dts/vfxxx.dtsi | 4 + drivers/iio/adc/vf610_adc.c | 225 +++++++++++++++------ 4 files changed, 179 insertions(+), 66 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-vf610 -- 2.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
