[PATCH v2 3/3] ARM: dts: add property for maximum ADC clock frequencies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ADC clock frequency is limited depending on modes used. Add
device tree property which allow to set the mode used and the
maximum frequency ratings for the instance. These allows to
set the ADC clock to a frequency which is within specification
according to the actual mode used.

Acked-by: Fugang Duan <B38611@xxxxxxxxxxxxx>
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
 Documentation/devicetree/bindings/iio/adc/vf610-adc.txt | 9 +++++++++
 arch/arm/boot/dts/vfxxx.dtsi                            | 4 ++++
 2 files changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
index 1a4a43d..3eb40e2 100644
--- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
@@ -11,6 +11,13 @@ Required properties:
 - clock-names: Must contain "adc", matching entry in the clocks property.
 - vref-supply: The regulator supply ADC reference voltage.
 
+Recommended properties:
+- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating
+  requirements. Three values are required, depending on conversion mode:
+  - Frequency in normal mode (ADLPC=0, ADHSC=0)
+  - Frequency in high-speed mode (ADLPC=0, ADHSC=1)
+  - Frequency in low-power mode (ADLPC=1, ADHSC=0)
+
 Example:
 adc0: adc@4003b000 {
 	compatible = "fsl,vf610-adc";
@@ -18,5 +25,7 @@ adc0: adc@4003b000 {
 	interrupts = <0 53 0x04>;
 	clocks = <&clks VF610_CLK_ADC0>;
 	clock-names = "adc";
+	fsl,adck-max-frequency = <30000000>, <40000000>,
+				<20000000>;
 	vref-supply = <&reg_vcc_3v3_mcu>;
 };
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index a29c7ce..c6609bd 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -189,6 +189,8 @@
 				clocks = <&clks VF610_CLK_ADC0>;
 				clock-names = "adc";
 				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
 			};
 
 			wdoga5: wdog@4003e000 {
@@ -387,6 +389,8 @@
 				clocks = <&clks VF610_CLK_ADC1>;
 				clock-names = "adc";
 				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
 			};
 
 			esdhc1: esdhc@400b2000 {
-- 
2.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux