On Sat, 2015-03-07 at 18:54 +0000, Jonathan Cameron wrote:
> On 05/03/15 16:05, Srinivas Pandruvada wrote:
> > HID Sensor Spec defines two usage ids for custom sensors
> > HID_USAGE_SENSOR_TYPE_OTHER_CUSTOM (0x09, 0xE1)
> > HID_USAGE_SENSOR_TYPE_OTHER_GENERIC(0x09, 0xE2)
> > The purpose of these sensors is to extend the functionality or provide a
> > way to obfuscate the data being communicated by a sensor. Without knowing the
> > mapping between the data and its encapsulated form, it is difficult for
> > an application/driver to determine what data is being communicated by the sensor.
> > This allows some differentiating use cases, where vendor can provide applications.
> > Some common use cases are debug other sensors or to provide some events like
> > keyboard attached/detached or lid open/close.
> > Since these can't be represented by standard sensor interfaces like IIO,
> > we present these as fields with
The problem is that the data embedded in these ids will is non standard.
So two manufacturers will not have same way to interpret values to write
a standard driver.
> > - type (input/output)
> > - units
> > - min/max
> > - get/set value
> > In addition an dev interface to transfer report events. Details about this
> > interface is described in /Documentation/hid/hid-sensor.txt.
> Various bits and bobs inline. I've cc'd linux-iio to keep others on there
> in the loop on this interface which could be abused as an alternative to
> more standard options (not that I'm suggesting it currently is!)
I agree. I am forcing everyone to use standard IIO internally. Also I
want to prevent them to create an empire using user space drivers.
>
> Jonathan
> >
> > Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> > ---
> > drivers/hid/Kconfig | 12 +
> > drivers/hid/Makefile | 1 +
> > drivers/hid/hid-sensor-custom.c | 551 ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 564 insertions(+)
> > create mode 100644 drivers/hid/hid-sensor-custom.c
> >
> > diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> > index 152b006..d1daab5 100644
> > --- a/drivers/hid/Kconfig
> > +++ b/drivers/hid/Kconfig
> > @@ -885,6 +885,18 @@ config HID_SENSOR_HUB
> > for events and handle data streams. Each sensor driver can format
> > data and present to user mode using input or IIO interface.
> >
> > +config HID_SENSOR_CUSTOM_SENSOR
> > + tristate "HID Sensors hub custom sensor support"
> > + depends on HID_SENSOR_HUB
> > + default n
> > + ---help---
> > + HID Sensor hub specification allows definition of some custom and
> > + generic sensors. Unlike other HID sensors, they can't be exported
> > + via Linux IIO. For example, these sensors define like opening of
> > + lid or keyboard attached.
> Both of which are bad examples as they have fairly standard interfaces in
> the kernel!
> > + This is upto the manufacturer to decide
> > + how to interpret these special sensor ids and process in user space.
> > + Select this config option for custom/generic sensor support.
> I would add here, that where possible manufacturers should be encouraged
> to use existing interfaces (will gain them all the advantages of standard
> ABI) but I appreciate it isn't always possible (or commercially acceptable).
> This approach at least means that we get the standard bits of the sensor
> hub rather than them trying to run the whole thing through a userspace
> driver.
>
I will add that.
> I am a little nervous that manufactuers might start deliberately hiding
> the more standard stuff so they can run it all through this interface
> and claim magic sauce when there is none there, but such is life!
This indirectly forcing everyone to use standard interfaces for all
except for custom ids. I want to prevent someone to push a catchall
driver for ids calling it a custom driver. I see lot of movement to
write such drivers.
> > +
> > endmenu
> >
> > endif # HID
> > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> > index 6f19958..c90ce7b 100644
> > --- a/drivers/hid/Makefile
> > +++ b/drivers/hid/Makefile
> > @@ -101,6 +101,7 @@ obj-$(CONFIG_HID_WACOM) += wacom.o
> > obj-$(CONFIG_HID_WALTOP) += hid-waltop.o
> > obj-$(CONFIG_HID_WIIMOTE) += hid-wiimote.o
> > obj-$(CONFIG_HID_SENSOR_HUB) += hid-sensor-hub.o
> > +obj-$(CONFIG_HID_SENSOR_CUSTOM_SENSOR) += hid-sensor-custom.o
> >
> > obj-$(CONFIG_USB_HID) += usbhid/
> > obj-$(CONFIG_USB_MOUSE) += usbhid/
> > diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c
> > new file mode 100644
> > index 0000000..283194a
> > --- /dev/null
> > +++ b/drivers/hid/hid-sensor-custom.c
> > @@ -0,0 +1,551 @@
> > +/*
> > + * hid-sensor-custom.c
> > + * Copyright (c) 2015, Intel Corporation.
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> > + * more details.
> > + *
> bonus blank line.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/init.h>
> > +#include <linux/miscdevice.h>
> > +#include <linux/kfifo.h>
> > +#include <linux/sched.h>
> > +#include <linux/wait.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/hid-sensor-hub.h>
> > +
> > +#define HID_CUSTOM_NAME_LENGTH 40
> > +#define HID_CUSTOM_MAX_CORE_ATTRS 10
> > +#define HID_CUSTOM_TOTAL_ATTRS (HID_CUSTOM_MAX_CORE_ATTRS + 1)
> > +#define HID_CUSTOM_FIFO_SIZE 256
> > +#define HID_CUSTOM_MAX_FEATURE_BYTES 64
> > +
> > +struct hid_sensor_custom_field {
> > + int report_id;
> > + char group_name[HID_CUSTOM_NAME_LENGTH];
> > + struct hid_sensor_hub_attribute_info attribute;
> > + struct device_attribute sd_attrs[HID_CUSTOM_MAX_CORE_ATTRS];
> > + char attr_name[HID_CUSTOM_TOTAL_ATTRS][HID_CUSTOM_NAME_LENGTH];
> > + struct attribute *attrs[HID_CUSTOM_TOTAL_ATTRS];
> > + struct attribute_group hid_custom_attribute_group;
> > +};
> > +
> > +struct hid_sensor_custom {
> > + struct mutex mutex;
> > + struct hid_sensor_hub_device *hsdev;
> > + struct platform_device *pdev;
> > + struct hid_sensor_hub_callbacks callbacks;
> > + struct hid_sensor_custom_field *fields;
> > + struct miscdevice custom_dev;
> > + struct kfifo data_fifo;
> > + unsigned long misc_opened;
> > + wait_queue_head_t wait;
> > + int sensor_field_count;
> > + bool enable;
> > +};
> > +
> > +/* Header for each sample to user space via dev interface */
> > +struct hid_sensor_sample {
> > + u32 usage_id;
> > + u32 raw_len;
> > +};
> > +
> > +static struct attribute hid_custom_attrs[] = {
> > + {.name = "units", .mode = S_IRUGO},
> > + {.name = "unit-expo", .mode = S_IRUGO},
> > + {.name = "minimum", .mode = S_IRUGO},
> > + {.name = "maximum", .mode = S_IRUGO},
> > + {.name = "size", .mode = S_IRUGO},
> > + {.name = "value", .mode = S_IWUSR | S_IRUGO},
> > + {.name = NULL}
> > +};
> > +
> > +static ssize_t enable_sensor_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct hid_sensor_custom *sensor_inst = platform_get_drvdata(pdev);
> > +
> > + return sprintf(buf, "%d\n", sensor_inst->enable);
> > +}
> > +
> > +static ssize_t enable_sensor_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct hid_sensor_custom *sensor_inst = platform_get_drvdata(pdev);
> > + int value;
> > + int ret = -EINVAL;
> > +
> > + if (kstrtoint(buf, 0, &value) != 0)
> > + return -EINVAL;
> > +
> > + mutex_lock(&sensor_inst->mutex);
> > + if (value && !sensor_inst->enable) {
> > + ret = sensor_hub_device_open(sensor_inst->hsdev);
> > + if (!ret)
> > + sensor_inst->enable = true;
> > + } else if (!value && sensor_inst->enable) {
> > + sensor_hub_device_close(sensor_inst->hsdev);
> > + sensor_inst->enable = false;
> > + }
> > + mutex_unlock(&sensor_inst->mutex);
> > +
> > + if (ret < 0)
> > + return ret;
> > +
> > + return count;
> > +}
> > +static DEVICE_ATTR_RW(enable_sensor);
> > +
> > +static struct attribute *enable_sensor_attrs[] = {
> > + &dev_attr_enable_sensor.attr,
> > + NULL,
> > +};
> > +
> > +static struct attribute_group enable_sensor_attr_group = {
> > + .attrs = enable_sensor_attrs,
> > +};
> > +
> > +static ssize_t show_value(struct device *dev, struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct hid_sensor_custom *sensor_inst = platform_get_drvdata(pdev);
> > + int index, usage;
> > + char name[HID_CUSTOM_NAME_LENGTH];
> > + bool feature = false;
> > + bool input = false;
> > + int value = 0;
> > +
> > + if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage,
> > + name) == 3)
> > + feature = true;
> > + else if (sscanf(attr->attr.name, "input-%d-%x-%s", &index, &usage,
> > + name) == 3)
> > + input = true;
> > + else
> > + return -EINVAL;
> > +
> > + if (!strncmp(name, "value", strlen("value"))) {
> > + u32 report_id;
> > + int ret;
> > +
> > + report_id = sensor_inst->fields[index].attribute.report_id;
> > + if (feature) {
> > + u8 values[HID_CUSTOM_MAX_FEATURE_BYTES];
> > + int len = 0;
> > + int i;
> > +
> > + ret = sensor_hub_get_feature(sensor_inst->hsdev,
> > + report_id, index,
> > + sizeof(values), values);
> > + if (ret < 0)
> > + return ret;
> > +
> > + for (i = 0; i < ret; ++i)
> > + len += snprintf(&buf[len], PAGE_SIZE - len,
> > + "%d ", values[i]);
> > + len += snprintf(&buf[len], PAGE_SIZE - len, "\n");
> > +
> > + return len;
> > + } else if (input)
> > + value = sensor_hub_input_attr_get_raw_value(
> > + sensor_inst->hsdev,
> > + sensor_inst->hsdev->usage,
> > + usage, report_id,
> > + SENSOR_HUB_SYNC);
> > + } else if (!strncmp(name, "units", strlen("units")))
> > + value = sensor_inst->fields[index].attribute.units;
> > + else if (!strncmp(name, "unit-expo", strlen("unit-expo")))
> > + value = sensor_inst->fields[index].attribute.unit_expo;
> > + else if (!strncmp(name, "size", strlen("size")))
> > + value = sensor_inst->fields[index].attribute.size;
> > + else if (!strncmp(name, "minimum", strlen("minimum")))
> > + value = sensor_inst->fields[index].attribute.logical_minimum;
> > + else if (!strncmp(name, "maximum", strlen("maximum")))
> > + value = sensor_inst->fields[index].attribute.logical_maximum;
> > + else
> > + return -EINVAL;
> > +
> > + return sprintf(buf, "%d\n", value);
> > +}
> > +
> > +static ssize_t store_value(struct device *dev, struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct hid_sensor_custom *sensor_inst = platform_get_drvdata(pdev);
> > + int index, usage;
> > + char name[HID_CUSTOM_NAME_LENGTH];
> > + bool feature = false;
> > + int value;
> > +
> > + if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage,
> > + name) == 3)
> > + feature = true;
> > + else
> > + return -EINVAL;
> > +
> > + if (!strncmp(name, "value", strlen("value"))) {
> > + u32 report_id;
> > + int ret;
> > +
> > + if (kstrtoint(buf, 0, &value) != 0)
> > + return -EINVAL;
> > +
> > + report_id = sensor_inst->fields[index].attribute.report_id;
> > + if (feature)
> > + ret = sensor_hub_set_feature(sensor_inst->hsdev,
> > + report_id, index,
> > + sizeof(value), &value);
> > + } else
> > + return -EINVAL;
> > +
> > + return count;
> > +}
> > +
> > +static int hid_sensor_push_sample(struct hid_sensor_hub_device *hsdev,
> > + unsigned usage_id, size_t raw_len,
> > + char *raw_data, void *priv)
> > +{
> > + struct hid_sensor_custom *sensor_inst = platform_get_drvdata(priv);
> > + int required_size = sizeof(struct hid_sensor_sample) + raw_len;
> > + struct hid_sensor_sample header;
> > +
> > + header.usage_id = usage_id;
> > + header.raw_len = raw_len;
> > + if (kfifo_avail(&sensor_inst->data_fifo) >= required_size) {
> > + kfifo_in(&sensor_inst->data_fifo, (unsigned char *)&header,
> > + sizeof(header));
> > + kfifo_in(&sensor_inst->data_fifo, (unsigned char *)raw_data,
> > + raw_len);
> Given conceptually these are one 'message' could we not make them one entry
> in the kfifo rather than 2?
I will change.
> > + wake_up(&sensor_inst->wait);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int hid_sensor_custom_add_field(struct hid_sensor_custom *sensor_inst,
> > + int index, int report_type,
> > + struct hid_report *report,
> > + struct hid_field *field)
> > +{
> > + struct hid_sensor_custom_field *sensor_field;
> > + void *fields;
> > +
> > + fields = krealloc(sensor_inst->fields,
> > + (sensor_inst->sensor_field_count + 1) *
> > + sizeof(struct hid_sensor_custom_field), GFP_KERNEL);
> > + if (!fields) {
> > + kfree(sensor_inst->fields);
> > + return -ENOMEM;
> > + }
> > + sensor_inst->fields = fields;
> > + sensor_field = &sensor_inst->fields[sensor_inst->sensor_field_count];
> > + sensor_field->attribute.usage_id = sensor_inst->hsdev->usage;
> > + if (field->logical)
> > + sensor_field->attribute.attrib_id = field->logical;
> > + else
> > + sensor_field->attribute.attrib_id = field->usage[0].hid;
> > +
> > + sensor_field->attribute.index = index;
> > + sensor_field->attribute.report_id = report->id;
> > + sensor_field->attribute.units = field->unit;
> > + sensor_field->attribute.unit_expo = field->unit_exponent;
> > + sensor_field->attribute.size = (field->report_size *
> > + field->report_count)/8;
> > + sensor_field->attribute.logical_minimum = field->logical_minimum;
> > + sensor_field->attribute.logical_maximum = field->logical_maximum;
> > +
> > + if (report_type == HID_FEATURE_REPORT)
> > + snprintf(sensor_field->group_name,
> > + sizeof(sensor_field->group_name), "feature-%x-%x",
> > + sensor_field->attribute.index,
> > + sensor_field->attribute.attrib_id);
> > + else if (report_type == HID_INPUT_REPORT)
> > + snprintf(sensor_field->group_name,
> > + sizeof(sensor_field->group_name),
> > + "input-%x-%x", sensor_field->attribute.index,
> > + sensor_field->attribute.attrib_id);
> > +
> > + memset(&sensor_field->hid_custom_attribute_group, 0,
> > + sizeof(struct attribute_group));
> > + sensor_inst->sensor_field_count++;
> > +
> > + return 0;
> > +}
> > +
> > +static int hid_sensor_custom_add_attributes(
> > + struct hid_sensor_custom *sensor_inst)
> > +{
> > + struct hid_sensor_hub_device *hsdev = sensor_inst->hsdev;
> > + struct hid_report *report;
> > + struct hid_field *field;
> > + struct hid_report_enum *report_enum;
> > + struct hid_device *hdev = hsdev->hdev;
> > + int ret = -1;
> > + int i, j;
> > +
> > + for (j = 0; j < HID_REPORT_TYPES; ++j) {
> > + if (j == HID_OUTPUT_REPORT)
> > + continue;
> > +
> > + report_enum = &hdev->report_enum[j];
> > + list_for_each_entry(report, &report_enum->report_list, list) {
> Perhaps add a few more utility functions in here to cut down on the indentation
> which is making it hard to read.
OK.
>
> > + for (i = 0; i < report->maxfield; ++i) {
> > + field = report->field[i];
> > + if (field->maxusage &&
> > + ((field->usage[0].collection_index >=
> > + hsdev->start_collection_index) &&
> > + (field->usage[0].collection_index <
> > + hsdev->end_collection_index))) {
> > +
> > + ret = hid_sensor_custom_add_field(
> > + sensor_inst,
> > + i, j, report,
> > + field);
> > + if (ret)
> > + return ret;
> > +
> > + }
> > + }
> > + }
> > + }
> > +
> > + /* Create sysfs attributes */
> > + for (i = 0; i < sensor_inst->sensor_field_count; ++i) {
> > + j = 0;
> > + while (j < HID_CUSTOM_TOTAL_ATTRS && hid_custom_attrs[j].name) {
> > + snprintf((char *)&sensor_inst->fields[i].attr_name[j],
> > + HID_CUSTOM_NAME_LENGTH, "%s-%s",
> > + sensor_inst->fields[i].group_name,
> > + hid_custom_attrs[j].name);
> This all looks fine, but is rather convoluted. Perhaps a local pointer to
> the current attribute might help.
OK
> > + sysfs_attr_init(&sensor_inst->fields[i].sd_attrs[j].
> > + dev_attr.attr);
> > + sensor_inst->fields[i].sd_attrs[j].attr.name =
> > + (char *)&sensor_inst->fields[i].attr_name[j];
> > + sensor_inst->fields[i].sd_attrs[j].attr.mode =
> > + hid_custom_attrs[j].mode;
> > + sensor_inst->fields[i].sd_attrs[j].show = show_value;
> > + if (hid_custom_attrs[j].mode & S_IWUSR)
> > + sensor_inst->fields[i].sd_attrs[j].store =
> > + store_value;
> > + sensor_inst->fields[i].attrs[j] =
> > + &sensor_inst->fields[i].sd_attrs[j].attr;
> > + ++j;
> > + }
> > + sensor_inst->fields[i].attrs[j] = NULL;
> > + sensor_inst->fields[i].hid_custom_attribute_group.attrs =
> > + sensor_inst->fields[i].attrs;
> > + sensor_inst->fields[i].hid_custom_attribute_group.name =
> > + sensor_inst->fields[i].group_name;
> > + ret = sysfs_create_group(&sensor_inst->pdev->dev.kobj,
> > + &sensor_inst->fields[i].
> > + hid_custom_attribute_group);
> > + if (ret)
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static ssize_t hid_sensor_custom_read(struct file *file, char __user *buf,
> > + size_t count, loff_t *f_ps)
> > +{
> > + struct hid_sensor_custom *sensor_inst;
> > + unsigned int copied;
> > + int ret;
> > +
> > + sensor_inst = container_of(file->private_data,
> > + struct hid_sensor_custom, custom_dev);
> > +
> > + if (count < sizeof(struct hid_sensor_sample))
> > + return -EINVAL;
> > + do {
> > + if (kfifo_is_empty(&sensor_inst->data_fifo)) {
> > + if (file->f_flags & O_NONBLOCK)
> > + return -EAGAIN;
> > +
> > + ret = wait_event_interruptible(sensor_inst->wait,
> > + !kfifo_is_empty(&sensor_inst->data_fifo));
> > + if (ret)
> > + return ret;
> > + }
> > + ret = kfifo_to_user(&sensor_inst->data_fifo, buf, count,
> > + &copied);
> > + if (ret)
> > + return ret;
> > + } while (copied == 0);
> > +
> > + return copied;
> > +}
> > +
> > +static int hid_sensor_custom_release(struct inode *inode, struct file *file)
> > +{
> > + struct hid_sensor_custom *sensor_inst;
> > +
> > + sensor_inst = container_of(file->private_data,
> > + struct hid_sensor_custom, custom_dev);
> > +
> > + clear_bit(0, &sensor_inst->misc_opened);
> > +
> > + return 0;
> > +}
> > +
> > +static int hid_sensor_custom_open(struct inode *inode, struct file *file)
> > +{
> > + struct hid_sensor_custom *sensor_inst;
> > +
> > + sensor_inst = container_of(file->private_data,
> > + struct hid_sensor_custom, custom_dev);
> > + /* We essentially have single reader and writer */
> Hehe. This is always the bit people complain about in IIO. Doesn't
> half make life easier / faster however ;)
Usually the OSs like Android has one reader, which will act as server.
I think multiple readers will empty Fifo without coordination.
> > + if (test_and_set_bit(0, &sensor_inst->misc_opened))
> > + return -EBUSY;
> > +
> > + return nonseekable_open(inode, file);
> Didn't know about this one. Might make sense in a few locations
> in IIO - such as pretty much everywhere given none of our opens
> are seekable.
> > +}
> > +
> > +static const struct file_operations hid_sensor_custom_fops = {
> > + .open = hid_sensor_custom_open,
> > + .read = hid_sensor_custom_read,
> > + .release = hid_sensor_custom_release,
> > + .llseek = noop_llseek,
> > +};
> > +
> > +static int hid_sensor_custom_dev_if(struct hid_sensor_custom *sensor_inst)
> > +{
> > + int ret;
> > +
> > + ret = kfifo_alloc(&sensor_inst->data_fifo, HID_CUSTOM_FIFO_SIZE,
> > + GFP_KERNEL);
> > + if (ret)
> > + return ret;
> > +
> > + init_waitqueue_head(&sensor_inst->wait);
> > +
> > + sensor_inst->custom_dev.minor = MISC_DYNAMIC_MINOR;
> > + sensor_inst->custom_dev.name = dev_name(&sensor_inst->pdev->dev);
> > + sensor_inst->custom_dev.fops = &hid_sensor_custom_fops,
> > + ret = misc_register(&sensor_inst->custom_dev);
> > + if (ret) {
> > + kfifo_free(&sensor_inst->data_fifo);
> > + return ret;
> > + }
> > + return 0;
> > +}
> > +
> > +static int hid_sensor_custom_probe(struct platform_device *pdev)
> > +{
> > + struct hid_sensor_custom *sensor_inst;
> > + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
> > + int ret;
> > + int i;
> > +
> > + sensor_inst = kzalloc(sizeof(*sensor_inst), GFP_KERNEL);
> > + if (!sensor_inst)
> > + return -ENOMEM;
> Just a thought, howabout devm_kzalloc? Not much of a saving, but worth
> having anyway perhaps ;)
> > +
> > + sensor_inst->callbacks.capture_sample = hid_sensor_push_sample;
> > + sensor_inst->callbacks.pdev = pdev;
> > + sensor_inst->hsdev = hsdev;
> > + sensor_inst->pdev = pdev;
> > + mutex_init(&sensor_inst->mutex);
> > + platform_set_drvdata(pdev, sensor_inst);
> > + ret = sensor_hub_register_callback(hsdev, hsdev->usage,
> > + &sensor_inst->callbacks);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "callback reg failed\n");
> > + goto err_free_inst;
> > + }
> > +
> > + ret = sysfs_create_group(&sensor_inst->pdev->dev.kobj,
> > + &enable_sensor_attr_group);
> > + if (ret)
> > + goto err_remove_callback;
> > +
> > + ret = hid_sensor_custom_add_attributes(sensor_inst);
> > + if (ret)
> > + goto err_remove_group;
> > +
> > + ret = hid_sensor_custom_dev_if(sensor_inst);
> > + if (ret)
> > + goto err_remove_attributes;
> > +
> > + return 0;
> > +
> > +err_remove_attributes:
> > + for (i = 0; i < sensor_inst->sensor_field_count; ++i)
> > + sysfs_remove_group(&sensor_inst->pdev->dev.kobj,
> > + &sensor_inst->fields[i].
> > + hid_custom_attribute_group);
> > + kfree(sensor_inst->fields);
> > +
> > +err_remove_group:
> > + sysfs_remove_group(&sensor_inst->pdev->dev.kobj,
> > + &enable_sensor_attr_group);
> > +err_remove_callback:
> > + sensor_hub_remove_callback(hsdev, hsdev->usage);
> > +err_free_inst:
> > + kfree(sensor_inst);
> > +
> > + return ret;
> > +}
> > +
> > +static int hid_sensor_custom_remove(struct platform_device *pdev)
> > +{
> > + int i;
> > + struct hid_sensor_custom *sensor_inst = platform_get_drvdata(pdev);
> > + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
> > +
> > + wake_up(&sensor_inst->wait);
> Wrap this up in a hid_sensor_custom_dev_if_remove or similar.
> Balanced add and remove functions simplify code review if nothing else ;)
OK
> > + misc_deregister(&sensor_inst->custom_dev);
> > + kfifo_free(&sensor_inst->data_fifo);
> > +
> I'd wrap the next block up in a function to mirror
> hid_sensor_custom_add_attributes.
OK
>
> > + for (i = 0; i < sensor_inst->sensor_field_count; ++i)
> > + sysfs_remove_group(&sensor_inst->pdev->dev.kobj,
> > + &sensor_inst->fields[i].
> > + hid_custom_attribute_group);
> > + kfree(sensor_inst->fields);
>
> > + sysfs_remove_group(&sensor_inst->pdev->dev.kobj,
> > + &enable_sensor_attr_group);
> > + sensor_hub_remove_callback(hsdev, hsdev->usage);
> > + kfree(sensor_inst);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_device_id hid_sensor_custom_ids[] = {
> > + {
> > + .name = "HID-SENSOR-2000e1",
> > + },
> > + {
> > + .name = "HID-SENSOR-2000e2",
> > + },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(platform, hid_sensor_custom_ids);
> > +
> > +static struct platform_driver hid_sensor_custom_platform_driver = {
> > + .id_table = hid_sensor_custom_ids,
> > + .driver = {
> > + .name = KBUILD_MODNAME,
> > + },
> > + .probe = hid_sensor_custom_probe,
> > + .remove = hid_sensor_custom_remove,
> > +};
> > +module_platform_driver(hid_sensor_custom_platform_driver);
> > +
> > +MODULE_DESCRIPTION("HID Sensor Custom and Generic sensor Driver");
> > +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
> > +MODULE_LICENSE("GPL");
> >
>
Thanks,
Srinivas
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
