The following changes since commit 3ec698816ab3a7aca39dd3389115840a48d5266d:
staging: nvec: specify a platform-device base id (2015-01-21 10:31:09 +0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-3.20b
for you to fetch changes up to 67460e8c9a5c59f66e1d476fd9341086cd792e5a:
iio:common:ssp_sensors fix warnings due to 32 bit instead of 64 bit passed to do_div (2015-01-31 09:41:14 +0000)
----------------------------------------------------------------
Second round of IIO new drivers, functionality and cleanups for the 3.20 cycle.
New drivers and device support:
* Capella cm3232 ambient light sensor driver.
* Freescale MMA9553 pedometer and activity monitor. Note this involved a
refactor of the mma9551 driver to pull out shared elements.
* Samsung sensor hub (as used in the galaxy gear 2 watch) Core support
and initial drivers (gyro and accelerometer) more to follow.
An additional fix was applied on top of this for a build issue
thrown up by the autobuilders on some platforms.
* Cosmic Circuits 10001 ADC driver
* Qualcomm SPMI PMIC voltage ADC driver (current adc merged a while back).
* Add binding for AK8963 (in capitals) as unfortunately there are bios'
out there not using lower case.
New functionality
* Add newe operating mode to the core to allow for non triggered software
buffers. This is mostly semantics as previously drivers just claimed they
had a hardware buffer (when they didn't).
* Add distance channel type.
* Add energy channel type.
* Add velocity channel type and IIO_MOD_ROOT_SUM_SQUARED (i.e. speed when
our channel type is velocity).
* Add _debounce_count and _debounce_time filter attributes. Only really
make sense for counting types of measurements. First use is for avoiding
miss detection of steps prior to walking.
* Add change event type. This replaces the briefly present INSTANCE type
(which hadn't gained any users). It is more generic as it allows for
events say every 10 steps rather than every step.
* Add _calibweight attributes to the ABI (and core support). Used by
activity monitors to estimate energy use. Can imagine there will be
other uses for this one.
Driver new functionality
* mma9551 gains runtime pm support.
* hid-sensors gain PM support.
Cleanup
* Change calibheight unit to m from cm. As there are no prior users
and this was inconsistent with other distance units, it makes sense
to fix it before hte mma9553 driver which uses it.
* mpu6050 cleanups and devm_ use.
* as3935 switch over to PM ops.
* Fix a few format strings for signed vs unsigned.
* Fix tcs3414 missindentation
* Typo in industrialio-event
* Stop requiring IIO_TRIGGER for IIO_KFIFO_BUF as we have drivers that don't
need it. No one is quite sure why that dependency was there and it
seems to not matter.
----------------------------------------------------------------
Asaf Vertz (3):
staging: iio: tsl2583: fix format string warnings
staging: iio: ad5933: fix format string warnings
staging: iio: tsl2x7x_core: fix format string warnings
Ezequiel Garcia (1):
DT: Add a vendor prefix for Cosmic Circuits
Irina Tirdea (11):
iio: core: Introduce ENERGY channel type
iio: core: Introduce DISTANCE channel type
iio: core: Introduce IIO_VELOCITY and IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z
iio: core: Introduce IIO_CHAN_INFO_CALIBWEIGHT
iio: core: Introduce CHANGE event type
iio: core: Remove IIO_EV_TYPE_INSTANCE
iio: accel: mma9551: Add runtime pm support
iio: accel: mma9551: split driver to expose mma955x api
iio: core: Introduce IIO_CHAN_INFO_DEBOUNCE_COUNT and _TIME
iio: Documentation: Fix calibheight unit
iio: add driver for Freescale MMA9553
Jonathan Cameron (1):
iio:common:ssp_sensors fix warnings due to 32 bit instead of 64 bit passed to do_div
Karol Wrona (7):
iio: Deselect IIO_TRIGGER for IIO_KFIFO_BUF
iio: Add new operating mode for non triggered sw buffers
iio: common: ssp_sensors: Add sensorhub driver
iio: sensorhub: Add sensorhub bindings
iio: common: ssp_sensors: Add sensorhub iio commons
iio: common: ssp_sensors: Add sensorhub accelerometer sensor
iio: common: ssp_sensors: Add sensorhub gyroscope sensor
Kevin Tsai (1):
iio: Added Capella cm3232 ambient light sensor driver.
Lars-Peter Clausen (1):
iio: as3935: Switch to PM ops
Phani Movva (2):
DT: iio: adc: Add CC_10001 binding documentation
iio: adc: Cosmic Circuits 10001 ADC driver
Roberta Dobrescu (3):
iio: industrialio-event: Fix typo 's/dynically/dynamically/'
iio: light: tcs3414: Fix misindented lines
iio: light: cm32181: Fix typo 's/claibscale/calibscale/'
Srinivas Pandruvada (9):
iio: hid_sensor_hub: Common PM functions
iio: hid-sensor-accel-3d: Introduce PM
iio: hid-sensor-gyro-3d: Introduce PM
iio: hid-sensor-als: Introduce PM
iio: hid-sensor-prox: Introduce PM
iio: hid-sensor-magn-3d: Introduce PM
iio: hid-sensor-incl-3d: Introduce PM
iio: hid-sensor-press: Introduce PM
iio: magnetometer: ak8975: Add AK8963
Stanimir Varbanov (2):
DT: iio: vadc: document dt binding
iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
Varka Bhadram (3):
imu: inv_mpu6050: use devm_iio_trigger_alloc
imu: inv_mpu6050: use devm_request_irq
imu: inv_mpu6050: cleanup on error check
Documentation/ABI/testing/sysfs-bus-iio | 123 +-
.../devicetree/bindings/i2c/trivial-devices.txt | 1 +
.../devicetree/bindings/iio/adc/cc10001_adc.txt | 22 +
.../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 129 ++
.../devicetree/bindings/iio/sensorhub.txt | 25 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 6 +
drivers/iio/Kconfig | 1 -
drivers/iio/accel/Kconfig | 15 +
drivers/iio/accel/Makefile | 7 +-
drivers/iio/accel/hid-sensor-accel-3d.c | 8 +-
drivers/iio/accel/mma9551.c | 489 ++-----
drivers/iio/accel/mma9551_core.c | 798 ++++++++++++
drivers/iio/accel/mma9551_core.h | 81 ++
drivers/iio/accel/mma9553.c | 1334 ++++++++++++++++++++
drivers/iio/accel/ssp_accel_sensor.c | 169 +++
drivers/iio/adc/Kconfig | 25 +
drivers/iio/adc/Makefile | 2 +
drivers/iio/adc/cc10001_adc.c | 423 +++++++
drivers/iio/adc/qcom-spmi-vadc.c | 1016 +++++++++++++++
drivers/iio/common/Kconfig | 1 +
drivers/iio/common/Makefile | 1 +
.../iio/common/hid-sensors/hid-sensor-trigger.c | 75 +-
.../iio/common/hid-sensors/hid-sensor-trigger.h | 5 +
drivers/iio/common/ssp_sensors/Kconfig | 26 +
drivers/iio/common/ssp_sensors/Makefile | 8 +
drivers/iio/common/ssp_sensors/ssp.h | 257 ++++
drivers/iio/common/ssp_sensors/ssp_dev.c | 712 +++++++++++
drivers/iio/common/ssp_sensors/ssp_iio.c | 107 ++
drivers/iio/common/ssp_sensors/ssp_iio_sensor.h | 71 ++
drivers/iio/common/ssp_sensors/ssp_spi.c | 608 +++++++++
drivers/iio/gyro/Makefile | 2 +
drivers/iio/gyro/hid-sensor-gyro-3d.c | 8 +-
drivers/iio/gyro/ssp_gyro_sensor.c | 168 +++
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 39 +-
drivers/iio/industrialio-buffer.c | 2 +
drivers/iio/industrialio-core.c | 7 +
drivers/iio/industrialio-event.c | 4 +-
drivers/iio/light/Kconfig | 11 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/cm32181.c | 2 +-
drivers/iio/light/cm3232.c | 403 ++++++
drivers/iio/light/hid-sensor-als.c | 9 +-
drivers/iio/light/hid-sensor-prox.c | 10 +-
drivers/iio/light/tcs3414.c | 4 +-
drivers/iio/magnetometer/ak8975.c | 1 +
drivers/iio/magnetometer/hid-sensor-magn-3d.c | 9 +-
drivers/iio/orientation/hid-sensor-incl-3d.c | 9 +-
drivers/iio/pressure/hid-sensor-press.c | 9 +-
drivers/iio/proximity/as3935.c | 18 +-
.../staging/iio/Documentation/iio_event_monitor.c | 4 +-
drivers/staging/iio/iio_simple_dummy.c | 2 +-
drivers/staging/iio/iio_simple_dummy_events.c | 4 +-
drivers/staging/iio/impedance-analyzer/ad5933.c | 4 +-
drivers/staging/iio/light/tsl2583.c | 2 +-
drivers/staging/iio/light/tsl2x7x_core.c | 2 +-
include/dt-bindings/iio/qcom,spmi-vadc.h | 119 ++
include/linux/iio/common/ssp_sensors.h | 82 ++
include/linux/iio/iio.h | 9 +-
include/linux/iio/types.h | 6 +-
60 files changed, 6977 insertions(+), 519 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/cc10001_adc.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
create mode 100644 Documentation/devicetree/bindings/iio/sensorhub.txt
create mode 100644 drivers/iio/accel/mma9551_core.c
create mode 100644 drivers/iio/accel/mma9551_core.h
create mode 100644 drivers/iio/accel/mma9553.c
create mode 100644 drivers/iio/accel/ssp_accel_sensor.c
create mode 100644 drivers/iio/adc/cc10001_adc.c
create mode 100644 drivers/iio/adc/qcom-spmi-vadc.c
create mode 100644 drivers/iio/common/ssp_sensors/Kconfig
create mode 100644 drivers/iio/common/ssp_sensors/Makefile
create mode 100644 drivers/iio/common/ssp_sensors/ssp.h
create mode 100644 drivers/iio/common/ssp_sensors/ssp_dev.c
create mode 100644 drivers/iio/common/ssp_sensors/ssp_iio.c
create mode 100644 drivers/iio/common/ssp_sensors/ssp_iio_sensor.h
create mode 100644 drivers/iio/common/ssp_sensors/ssp_spi.c
create mode 100644 drivers/iio/gyro/ssp_gyro_sensor.c
create mode 100644 drivers/iio/light/cm3232.c
create mode 100644 include/dt-bindings/iio/qcom,spmi-vadc.h
create mode 100644 include/linux/iio/common/ssp_sensors.h
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
