On Thu, 2015-01-22 at 14:31 -0800, Srinivas Pandruvada wrote:
> This is a follow up patches after adding i2c mux adapter for bypass
> mode. Potentially many different types of sensor can be attached to
> INVMPU6XXX device, which can be connected to main cpu i2c bus in
> bypass mode.
> Why do we need this?
> The system ACPI table entry will consist of only one device for
> INV6XXX, assuming that this driver will handle all connected sensors.
> That is not true for the Linux driver. There are bunch of IIO drivers
> for each sensors, hence we created a mux on this device. So to load
> these additional drivers, we need to create i2c devices for them
> in this driver using this mux adapter.
>
> There are multiple options:
> 1. Use the auto detect feature, this needs a new i2c class for the
> adapter as the existing HWMON class is not acceptable. Also the
> autodetect has overhead of executing detect method for each
> matching class of adapters.
> This is a simple implementation. This option was previously submitted
> with not a happy feedback.
>
> 2. Option is use ACPI magic and parse the configuration data. What
> we need to create a i2c device at a minimum is address and a name.
> Address can be obtained for secondary device in more or less in a
> standard way from using _CRS element. But there is no name. To get
> name we need to process proprietary vendor data. Not having name is
> not fun, as you have to create device using the device name of
> INVN6XXXX, respecting driver duplicate name space restriction.
> Also each client driver needs to have this name in the id table.
> Since multiple driver can be loaded, the driver should be able to
> detect its presence and gracefully exit for the other client driver
> to take it over.
> So we use two step process:
> - Use DMI to id platform and parse propritery data. This is not uncommon
> for many x86 platform specific driver. We will get both name and address.
> The change created necessary infrastructure to add more properitery vendor
> data parsing.
> - If DMI match fails, then create device on INV6XXX-client (we can't
> create with same name as INV6XXX as it will cause duplicate name and driver
> model will reject.) With this each client sensor driver which needs to get
> attached via INV6XXXX, need this name in the id table and detect the
> physical presence of sensor in probe and exit if not found.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> ---
> drivers/iio/imu/inv_mpu6050/Makefile | 2 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 196 +++++++++++++++++++++++++++++
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 11 ++
> drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 3 +
> 4 files changed, 211 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
>
> diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile
> index 3a677c7..f566f6a 100644
> --- a/drivers/iio/imu/inv_mpu6050/Makefile
> +++ b/drivers/iio/imu/inv_mpu6050/Makefile
> @@ -3,4 +3,4 @@
> #
>
> obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o
> -inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o
> +inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o inv_mpu_acpi.o
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
> new file mode 100644
> index 0000000..2d98c1a
> --- /dev/null
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
> @@ -0,0 +1,196 @@
> +/*
> + * inv_mpu_acpi: ACPI processing for creating client devices
> + * Copyright (c) 2015, Intel Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/i2c.h>
> +#include <linux/dmi.h>
> +#include <linux/acpi.h>
> +#include "inv_mpu_iio.h"
> +
> +enum inv_mpu_product_name {
> + INV_MPU_NOT_MATCHED,
> + INV_MPU_ASUS_T100TA,
> +};
> +
> +static enum inv_mpu_product_name matched_product_name;
> +
> +static int __init asus_t100_matched(const struct dmi_system_id *d)
> +{
> + matched_product_name = INV_MPU_ASUS_T100TA;
> +
> + return 0;
> +}
> +
> +static const struct dmi_system_id inv_mpu_dev_list[] = {
> + {
> + .callback = asus_t100_matched,
> + .ident = "Asus Transformer Book T100",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
> + DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
> + },
> + },
> + /* Add more matching tables here..*/
> + {}
> +};
> +
> +static int asus_acpi_get_sensor_info(struct acpi_device *adev,
> + struct i2c_client *client,
> + struct i2c_board_info *info)
> +{
> + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
> + int i;
> + acpi_status status;
> + union acpi_object *cpm;
> +
> + status = acpi_evaluate_object(adev->handle, "CNF0", NULL, &buffer);
> + if (ACPI_FAILURE(status))
> + return -ENODEV;
> +
> + cpm = buffer.pointer;
> + for (i = 0; i < cpm->package.count; ++i) {
> + union acpi_object *elem;
> + int j;
> +
> + elem = &(cpm->package.elements[i]);
> + for (j = 0; j < elem->package.count; ++j) {
> + union acpi_object *sub_elem;
> +
> + sub_elem = &(elem->package.elements[j]);
> + if (sub_elem->type == ACPI_TYPE_STRING)
> + strlcpy(info->type, sub_elem->string.pointer,
> + sizeof(info->type));
> + else if (sub_elem->type == ACPI_TYPE_INTEGER) {
> + if (sub_elem->integer.value != client->addr) {
> + info->addr = sub_elem->integer.value;
> + break; /* Not a MPU6500 primary */
> + }
> + }
> + }
> + }
> +
> + kfree(buffer.pointer);
> +
> + return cpm->package.count;
> +}
> +
> +static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data)
> +{
> + u32 *addr = data;
> +
> + if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
> + struct acpi_resource_i2c_serialbus *sb;
> +
> + sb = &ares->data.i2c_serial_bus;
> + if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
> + if (*addr)
> + *addr |= (sb->slave_address << 16);
> + else
> + *addr = sb->slave_address;
> + }
> + }
> +
> + /* Tell the ACPI core that we already copied this address */
> + return 1;
> +}
> +
> +static int inv_mpu_process_acpi_config(struct i2c_client *client,
> + unsigned short *primary_addr,
> + unsigned short *secondary_addr)
> +{
> + const struct acpi_device_id *id;
> + struct acpi_device *adev;
> + u32 i2c_addr = 0;
> + LIST_HEAD(resources);
> + int ret;
> +
> + id = acpi_match_device(client->dev.driver->acpi_match_table,
> + &client->dev);
> + if (!id)
> + return -ENODEV;
> +
> + adev = ACPI_COMPANION(&client->dev);
> + if (!adev)
> + return -ENODEV;
> +
> + ret = acpi_dev_get_resources(adev, &resources,
> + acpi_i2c_check_resource, &i2c_addr);
> + if (ret < 0)
> + return ret;
> +
> + acpi_dev_free_resource_list(&resources);
> + *primary_addr = i2c_addr & 0x0000ffff;
> + *secondary_addr = (i2c_addr & 0xffff0000) >> 16;
> +
> + return 0;
> +}
> +
> +int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st)
> +{
> +
> + st->mux_client = NULL;
> + if (ACPI_HANDLE(&st->client->dev)) {
> + struct i2c_board_info info;
> + struct acpi_device *adev;
> + int ret = -1;
> +
> + adev = ACPI_COMPANION(&st->client->dev);
> + memset(&info, 0, sizeof(info));
> +
> + dmi_check_system(inv_mpu_dev_list);
> + switch (matched_product_name) {
> + case INV_MPU_ASUS_T100TA:
> + ret = asus_acpi_get_sensor_info(adev, st->client,
> + &info);
> + break;
> + /* Add more matched product processing here */
> + default:
> + break;
> + }
> +
> + if (ret < 0) {
> + /* No matching DMI, so create device on INV6XX type */
> + unsigned short primary, secondary;
> +
> + ret = inv_mpu_process_acpi_config(st->client, &primary,
> + &secondary);
> + if (!ret && secondary) {
> + char *name;
> +
> + info.addr = secondary;
> + strlcpy(info.type, dev_name(&adev->dev),
> + sizeof(info.type));
> + name = strchr(info.type, ':');
> + if (name)
> + *name = '\0';
> + strlcat(info.type, "-client",
> + sizeof(info.type));
> + } else
> + return 0; /* no secondary addr, which is OK */
> + }
> + st->mux_client = i2c_new_device(st->mux_adapter, &info);
> + if (!st->mux_client)
> + return -ENODEV;
> +
> + }
> +
> + return 0;
> +}
> +
> +void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st)
> +{
> + if (st->mux_client)
> + i2c_unregister_device(st->mux_client);
> +}
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index d8d5bed..280aa77 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -825,8 +825,16 @@ static int inv_mpu_probe(struct i2c_client *client,
> goto out_unreg_device;
> }
>
> +#ifdef CONFIG_ACPI
> + result = inv_mpu_acpi_create_mux_client(st);
> + if (result)
> + goto out_del_mux;
> +#endif
> +
> return 0;
>
> +out_del_mux:
> + i2c_del_mux_adapter(st->mux_adapter);
Need to enclose above two lines under CONFIG_ACPI also.
I will resubmit with any other changes suggested.
Thanks,
Srinivas
> out_unreg_device:
> iio_device_unregister(indio_dev);
> out_remove_trigger:
> @@ -841,6 +849,9 @@ static int inv_mpu_remove(struct i2c_client *client)
> struct iio_dev *indio_dev = i2c_get_clientdata(client);
> struct inv_mpu6050_state *st = iio_priv(indio_dev);
>
> +#ifdef CONFIG_ACPI
> + inv_mpu_acpi_delete_mux_client(st);
> +#endif
> i2c_del_mux_adapter(st->mux_adapter);
> iio_device_unregister(indio_dev);
> inv_mpu6050_remove_trigger(st);
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index aa837de..db0a4a2 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -121,6 +121,7 @@ struct inv_mpu6050_state {
> spinlock_t time_stamp_lock;
> struct i2c_client *client;
> struct i2c_adapter *mux_adapter;
> + struct i2c_client *mux_client;
> unsigned int powerup_count;
> struct inv_mpu6050_platform_data plat_data;
> DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
> @@ -251,3 +252,5 @@ int inv_reset_fifo(struct iio_dev *indio_dev);
> int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask);
> int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
> int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
> +int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st);
> +void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st);
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
