On Mon, Jan 12, 2015 at 9:55 AM, Srinivas Pandruvada
<srinivas.pandruvada@xxxxxxxxxxxxxxx> wrote:
> Some hid sensor feature report can contain more than one reports.
> This API can now support receiving multiple values from the feature
> report.
> Also update the parameters in the users of this API.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> ---
> drivers/hid/hid-sensor-hub.c | 16 ++++++++++++++--
> drivers/iio/common/hid-sensors/hid-sensor-attributes.c | 13 +++++++------
> drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 4 ++--
> include/linux/hid-sensor-hub.h | 8 +++++---
> 4 files changed, 28 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
> index 83b6e15..d17aa67 100644
> --- a/drivers/hid/hid-sensor-hub.c
> +++ b/drivers/hid/hid-sensor-hub.c
> @@ -218,10 +218,11 @@ done_proc:
> EXPORT_SYMBOL_GPL(sensor_hub_set_feature);
>
> int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
> - u32 field_index, s32 *value)
> + u32 field_index, int buffer_size, void *buffer)
> {
> struct hid_report *report;
> struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
> + int report_size;
> int ret = 0;
>
> mutex_lock(&data->mutex);
> @@ -233,7 +234,18 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
> }
> hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
> hid_hw_wait(hsdev->hdev);
> - *value = report->field[field_index]->value[0];
> +
> + /* calculate number of bytes required to read this field */
> + report_size = report->field[field_index]->report_size / 8;
> + if (report->field[field_index]->report_size % 8)
> + ++report_size;
> + report_size *= report->field[field_index]->report_count;
Hi Srinivas,
I resend my reply.
It was discarded by the mailing list due to wrong setting with html formatting.
I think would be more clear writing directly:
report_size = DIV_ROUND_UP(report->field[field_index]->report_size, 8) *
report->field[field_index]->report_count;
Regards,
Antonio
> + if (!report_size) {
> + ret = -EINVAL;
> + goto done_proc;
> + }
> + ret = min(report_size, buffer_size);
> + memcpy(buffer, report->field[field_index]->value, ret);
>
> done_proc:
> mutex_unlock(&data->mutex);
> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> index 25b01e1..e1435e9 100644
> --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> @@ -153,8 +153,8 @@ s32 hid_sensor_read_poll_value(struct hid_sensor_common *st)
> int ret;
>
> ret = sensor_hub_get_feature(st->hsdev,
> - st->poll.report_id,
> - st->poll.index, &value);
> + st->poll.report_id,
> + st->poll.index, sizeof(value), &value);
>
> if (ret < 0 || value < 0) {
> return -EINVAL;
> @@ -174,8 +174,8 @@ int hid_sensor_read_samp_freq_value(struct hid_sensor_common *st,
> int ret;
>
> ret = sensor_hub_get_feature(st->hsdev,
> - st->poll.report_id,
> - st->poll.index, &value);
> + st->poll.report_id,
> + st->poll.index, sizeof(value), &value);
> if (ret < 0 || value < 0) {
> *val1 = *val2 = 0;
> return -EINVAL;
> @@ -229,8 +229,9 @@ int hid_sensor_read_raw_hyst_value(struct hid_sensor_common *st,
> int ret;
>
> ret = sensor_hub_get_feature(st->hsdev,
> - st->sensitivity.report_id,
> - st->sensitivity.index, &value);
> + st->sensitivity.report_id,
> + st->sensitivity.index, sizeof(value),
> + &value);
> if (ret < 0 || value < 0) {
> *val1 = *val2 = 0;
> return -EINVAL;
> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> index 92068cd..ef0c495 100644
> --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> @@ -76,8 +76,8 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
> }
>
> sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
> - st->power_state.index,
> - &state_val);
> + st->power_state.index,
> + sizeof(state_val), &state_val);
> return 0;
> }
> EXPORT_SYMBOL(hid_sensor_power_state);
> diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
> index 0b21c4f..1995bbd 100644
> --- a/include/linux/hid-sensor-hub.h
> +++ b/include/linux/hid-sensor-hub.h
> @@ -203,13 +203,15 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
> * @hsdev: Hub device instance.
> * @report_id: Report id to look for
> * @field_index: Field index inside a report
> -* @value: Place holder for return value
> +* @buffer_size: size of the buffer
> +* @buffer: buffer to copy output
> *
> * Used to get a field in feature report. For example this can get polling
> -* interval, sensitivity, activate/deactivate state.
> +* interval, sensitivity, activate/deactivate state. On success it returns
> +* number of bytes copied to buffer. On failure, it returns value < 0.
> */
> int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
> - u32 field_index, s32 *value);
> + u32 field_index, int buffer_size, void *buffer);
>
> /* hid-sensor-attributes */
>
> --
> 1.9.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
