Kevin,
On Wed, Dec 31, 2014 at 04:10:30PM -0800, Kevin Tsai wrote:
> CM3232 is an advanced ambient light sensor with I2C protocol interface.
> The I2C slave address is internally hardwired as 0x10 (7-bit). Writing
> to configure register is byte mode, but reading ALS register requests to
> use word mode for 16-bit resolution.
>
> Signed-off-by: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/i2c/trivial-devices.txt | 1 +
> MAINTAINERS | 6 +
> drivers/iio/light/Kconfig | 11 +
[...]
> +static int cm3232_get_lux(struct cm3232_chip *chip);
> +static int cm3232_read_als_it(struct cm3232_chip *chip, int *val2);
> +
> +/**
> + * cm3232_reg_init() - Initialize CM3232 registers
> + * @chip: pointer of struct cm3232.
> + *
> + * Initialize CM3232 ambient light sensor register to default values.
> + *
> + Return: 0 for success; otherwise for error code.
Is a '*' missing?
> + */
> +static int cm3232_reg_init(struct cm3232_chip *chip)
> +{
> + struct i2c_client *client = chip->client;
> + struct cm3232_als_info *als_info;
> + s32 ret;
> +
> + /* Identify device */
[...]
> +
> + /* Calculate mlux per bit based on als_it */
> + ret = cm3232_read_als_it(chip, &als_it);
> + if (ret < 0)
> + return -EINVAL;
> + tmp = (__force u64)als_info->mlux_per_bit;
> + tmp *= als_info->mlux_per_bit_base_it;
> + tmp = div_u64 (tmp, als_it);
^
no space after function
> +
> + /* Get als_raw */
> + als_info->als_raw = i2c_smbus_read_word_data(
> + client,
> + CM3232_REG_ADDR_ALS);
> + if (als_info->als_raw < 0)
> + return als_info->als_raw;
> +
> + tmp *= als_info->als_raw;
> + tmp *= als_info->calibscale;
> + tmp = div_u64(tmp, CM3232_CALIBSCALE_RESOLUTION);
> + tmp = div_u64(tmp, CM3232_MLUX_PER_LUX);
[...]
It builds clean and there are no checkpatch or sparse errors.
Overall it looks good.
--
- Jeremiah Mahler
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
