Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@xxxxxxxxx> --- Changes since v3: - remove unnecessary typecast and double negation; Changes since v2: - use GENMASK, BIT, ARRAY_SIZE macros where appropriate; - use bool instead of int for prox_stat; - rework sample frequency table code; - consolidate event config sanity checks to a single condition; - fix bug when deciding to disable proximity IRQ; - prefer kzalloc to kmalloc; - only cleanup trigger if it was registered (irq > 0); - add mention for building as module in Kconfig help text; Changes since v1: - report raw readings of the channels instead of just 0 or 1. - add a new Kconfig section for proximity and leave the lightning sensor in its own one. drivers/iio/proximity/Kconfig | 17 + drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/sx9500.c | 739 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 757 insertions(+) create mode 100644 drivers/iio/proximity/sx9500.c diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index 0c8cdf5..41a8d8f 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -17,3 +17,20 @@ config AS3935 module will be called as3935 endmenu + +menu "Proximity sensors" + +config SX9500 + tristate "SX9500 Semtech proximity sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + depends on I2C + help + Say Y here to build a driver for Semtech's SX9500 capacitive + proximity/button sensor. + + To compile this driver as a module, choose M here: the + module will be called sx9500. + +endmenu diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index 743adee..9818dc5 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -4,3 +4,4 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AS3935) += as3935.o +obj-$(CONFIG_SX9500) += sx9500.o diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c new file mode 100644 index 0000000..24ab48c --- /dev/null +++ b/drivers/iio/proximity/sx9500.c @@ -0,0 +1,739 @@ +/* + * Copyright (c) 2014 Intel Corporation + * + * Driver for Semtech's SX9500 capacitive proximity/button solution. + * Datasheet available at + * <http://www.semtech.com/images/datasheet/sx9500.pdf>. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/acpi.h> +#include <linux/gpio/consumer.h> +#include <linux/regmap.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#define SX9500_DRIVER_NAME "sx9500" +#define SX9500_IRQ_NAME "sx9500_event" +#define SX9500_GPIO_NAME "sx9500_gpio" + +/* Register definitions. */ +#define SX9500_REG_IRQ_SRC 0x00 +#define SX9500_REG_STAT 0x01 +#define SX9500_REG_IRQ_MSK 0x03 + +#define SX9500_REG_PROX_CTRL0 0x06 +#define SX9500_REG_PROX_CTRL1 0x07 +#define SX9500_REG_PROX_CTRL2 0x08 +#define SX9500_REG_PROX_CTRL3 0x09 +#define SX9500_REG_PROX_CTRL4 0x0a +#define SX9500_REG_PROX_CTRL5 0x0b +#define SX9500_REG_PROX_CTRL6 0x0c +#define SX9500_REG_PROX_CTRL7 0x0d +#define SX9500_REG_PROX_CTRL8 0x0e + +#define SX9500_REG_SENSOR_SEL 0x20 +#define SX9500_REG_USE_MSB 0x21 +#define SX9500_REG_USE_LSB 0x22 +#define SX9500_REG_AVG_MSB 0x23 +#define SX9500_REG_AVG_LSB 0x24 +#define SX9500_REG_DIFF_MSB 0x25 +#define SX9500_REG_DIFF_LSB 0x26 +#define SX9500_REG_OFFSET_MSB 0x27 +#define SX9500_REG_OFFSET_LSB 0x28 + +#define SX9500_REG_RESET 0x7f + +/* Write this to REG_RESET to do a soft reset. */ +#define SX9500_SOFT_RESET 0xde + +#define SX9500_SCAN_PERIOD_MASK GENMASK(6, 4) +#define SX9500_SCAN_PERIOD_SHIFT 4 + +/* + * These serve for identifying IRQ source in the IRQ_SRC register, and + * also for masking the IRQs in the IRQ_MSK register. + */ +#define SX9500_CLOSE_IRQ BIT(6) +#define SX9500_FAR_IRQ BIT(5) +#define SX9500_CONVDONE_IRQ BIT(3) + +#define SX9500_PROXSTAT_SHIFT 4 + +#define SX9500_NUM_CHANNELS 4 + +struct sx9500_data { + struct mutex mutex; + struct i2c_client *client; + struct iio_trigger *trig; + struct regmap *regmap; + /* + * Last reading of the proximity status for each channel. We + * only send an event to user space when this changes. + */ + bool prox_stat[SX9500_NUM_CHANNELS]; + bool event_enabled[SX9500_NUM_CHANNELS]; + bool trigger_enabled; +}; + +static const struct iio_event_spec sx9500_events[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + }, +}; + +#define SX9500_CHANNEL(idx) \ + { \ + .type = IIO_PROXIMITY, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .indexed = 1, \ + .channel = idx, \ + .event_spec = sx9500_events, \ + .num_event_specs = ARRAY_SIZE(sx9500_events), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .shift = 0, \ + }, \ + } + +static const struct iio_chan_spec sx9500_channels[] = { + SX9500_CHANNEL(0), + SX9500_CHANNEL(1), + SX9500_CHANNEL(2), + SX9500_CHANNEL(3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static const struct { + int val; + int val2; +} sx9500_samp_freq_table[] = { + {33, 333333}, + {16, 666666}, + {11, 111111}, + {8, 333333}, + {6, 666666}, + {5, 0}, + {3, 333333}, + {2, 500000}, +}; + +static const struct regmap_range sx9500_writable_reg_ranges[] = { + regmap_reg_range(SX9500_REG_IRQ_MSK, SX9500_REG_IRQ_MSK), + regmap_reg_range(SX9500_REG_PROX_CTRL0, SX9500_REG_PROX_CTRL8), + regmap_reg_range(SX9500_REG_SENSOR_SEL, SX9500_REG_SENSOR_SEL), + regmap_reg_range(SX9500_REG_OFFSET_MSB, SX9500_REG_OFFSET_LSB), + regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET), +}; + +static const struct regmap_access_table sx9500_writeable_regs = { + .yes_ranges = sx9500_writable_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(sx9500_writable_reg_ranges), +}; + +/* + * All allocated registers are readable, so we just list unallocated + * ones. + */ +static const struct regmap_range sx9500_non_readable_reg_ranges[] = { + regmap_reg_range(SX9500_REG_STAT + 1, SX9500_REG_STAT + 1), + regmap_reg_range(SX9500_REG_IRQ_MSK + 1, SX9500_REG_PROX_CTRL0 - 1), + regmap_reg_range(SX9500_REG_PROX_CTRL8 + 1, SX9500_REG_SENSOR_SEL - 1), + regmap_reg_range(SX9500_REG_OFFSET_LSB + 1, SX9500_REG_RESET - 1), +}; + +static const struct regmap_access_table sx9500_readable_regs = { + .no_ranges = sx9500_non_readable_reg_ranges, + .n_no_ranges = ARRAY_SIZE(sx9500_non_readable_reg_ranges), +}; + +static const struct regmap_range sx9500_volatile_reg_ranges[] = { + regmap_reg_range(SX9500_REG_IRQ_SRC, SX9500_REG_STAT), + regmap_reg_range(SX9500_REG_USE_MSB, SX9500_REG_OFFSET_LSB), + regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET), +}; + +static const struct regmap_access_table sx9500_volatile_regs = { + .yes_ranges = sx9500_volatile_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(sx9500_volatile_reg_ranges), +}; + +static const struct regmap_config sx9500_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SX9500_REG_RESET, + .cache_type = REGCACHE_RBTREE, + + .wr_table = &sx9500_writeable_regs, + .rd_table = &sx9500_readable_regs, + .volatile_table = &sx9500_volatile_regs, +}; + +static int sx9500_read_proximity(struct sx9500_data *data, + const struct iio_chan_spec *chan, + int *val) +{ + int ret; + __be16 regval; + + ret = regmap_write(data->regmap, SX9500_REG_SENSOR_SEL, chan->channel); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, SX9500_REG_USE_MSB, ®val, 2); + if (ret < 0) + return ret; + + *val = 32767 - (s16)be16_to_cpu(regval); + + return IIO_VAL_INT; +} + +static int sx9500_read_samp_freq(struct sx9500_data *data, + int *val, int *val2) +{ + int ret; + unsigned int regval; + + mutex_lock(&data->mutex); + ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, ®val); + mutex_unlock(&data->mutex); + + if (ret < 0) + return ret; + + regval = (regval & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT; + *val = sx9500_samp_freq_table[regval].val; + *val2 = sx9500_samp_freq_table[regval].val2; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int sx9500_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + + switch (chan->type) { + case IIO_PROXIMITY: + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + mutex_lock(&data->mutex); + ret = sx9500_read_proximity(data, chan, val); + mutex_unlock(&data->mutex); + return ret; + case IIO_CHAN_INFO_SAMP_FREQ: + return sx9500_read_samp_freq(data, val, val2); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int sx9500_set_samp_freq(struct sx9500_data *data, + int val, int val2) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(sx9500_samp_freq_table); i++) + if (val == sx9500_samp_freq_table[i].val && + val2 == sx9500_samp_freq_table[i].val2) + break; + + if (i == ARRAY_SIZE(sx9500_samp_freq_table)) + return -EINVAL; + + mutex_lock(&data->mutex); + + ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0, + SX9500_SCAN_PERIOD_MASK, + i << SX9500_SCAN_PERIOD_SHIFT); + + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9500_write_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long mask) +{ + struct sx9500_data *data = iio_priv(indio_dev); + + switch (chan->type) { + case IIO_PROXIMITY: + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return sx9500_set_samp_freq(data, val, val2); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static irqreturn_t sx9500_irq_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct sx9500_data *data = iio_priv(indio_dev); + + if (data->trigger_enabled) + iio_trigger_poll(data->trig); + + /* + * Even if no event is enabled, we need to wake the thread to + * clear the interrupt state by reading SX9500_REG_IRQ_SRC. It + * is not possible to do that here because regmap_read takes a + * mutex. + */ + return IRQ_WAKE_THREAD; +} + +static irqreturn_t sx9500_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + unsigned int val, chan; + + mutex_lock(&data->mutex); + + ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val); + if (ret < 0) { + dev_err(&data->client->dev, "i2c transfer error in irq\n"); + goto out; + } + + if (!(val & (SX9500_CLOSE_IRQ | SX9500_FAR_IRQ))) + goto out; + + ret = regmap_read(data->regmap, SX9500_REG_STAT, &val); + if (ret < 0) { + dev_err(&data->client->dev, "i2c transfer error in irq\n"); + goto out; + } + + val >>= SX9500_PROXSTAT_SHIFT; + for (chan = 0; chan < SX9500_NUM_CHANNELS; chan++) { + int dir; + u64 ev; + bool new_prox = val & BIT(chan); + + if (!data->event_enabled[chan]) + continue; + if (new_prox == data->prox_stat[chan]) + /* No change on this channel. */ + continue; + + dir = new_prox ? IIO_EV_DIR_FALLING : + IIO_EV_DIR_RISING; + ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, + chan, + IIO_EV_TYPE_THRESH, + dir); + iio_push_event(indio_dev, ev, iio_get_time_ns()); + data->prox_stat[chan] = new_prox; + } + +out: + mutex_unlock(&data->mutex); + + return IRQ_HANDLED; +} + +static int sx9500_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct sx9500_data *data = iio_priv(indio_dev); + + if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH || + dir != IIO_EV_DIR_EITHER) + return -EINVAL; + + return data->event_enabled[chan->channel]; +} + +static int sx9500_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret, i; + bool any_active = false; + unsigned int irqmask; + + if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH || + dir != IIO_EV_DIR_EITHER) + return -EINVAL; + + mutex_lock(&data->mutex); + + data->event_enabled[chan->channel] = state; + + for (i = 0; i < SX9500_NUM_CHANNELS; i++) + if (data->event_enabled[i]) { + any_active = true; + break; + } + + irqmask = SX9500_CLOSE_IRQ | SX9500_FAR_IRQ; + ret = regmap_update_bits(data->regmap, SX9500_REG_IRQ_MSK, + irqmask, any_active ? irqmask : 0); + + mutex_unlock(&data->mutex); + + return ret; +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "2.500000 3.333333 5 6.666666 8.333333 11.111111 16.666666 33.333333"); + +static struct attribute *sx9500_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group sx9500_attribute_group = { + .attrs = sx9500_attributes, +}; + +static const struct iio_info sx9500_info = { + .driver_module = THIS_MODULE, + .attrs = &sx9500_attribute_group, + .read_raw = &sx9500_read_raw, + .write_raw = &sx9500_write_raw, + .read_event_config = &sx9500_read_event_config, + .write_event_config = &sx9500_write_event_config, +}; + +static int sx9500_set_trigger_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + + ret = regmap_update_bits(data->regmap, SX9500_REG_IRQ_MSK, + SX9500_CONVDONE_IRQ, + state ? SX9500_CONVDONE_IRQ : 0); + if (ret == 0) + data->trigger_enabled = state; + + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_trigger_ops sx9500_trigger_ops = { + .set_trigger_state = sx9500_set_trigger_state, + .owner = THIS_MODULE, +}; + +static irqreturn_t sx9500_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct sx9500_data *data = iio_priv(indio_dev); + s16 *buf; + int val, bit, ret, i = 0; + + buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (!buf) { + dev_err(&data->client->dev, + "failed to allocate memory in trigger handler\n"); + return IRQ_HANDLED; + } + + mutex_lock(&data->mutex); + + for_each_set_bit(bit, indio_dev->buffer->scan_mask, + indio_dev->masklength) { + ret = sx9500_read_proximity(data, &indio_dev->channels[bit], + &val); + if (ret < 0) + goto out; + + buf[i++] = val; + } + + iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_get_time_ns()); + +out: + mutex_unlock(&data->mutex); + + kfree(buf); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +struct sx9500_reg_default { + u8 reg; + u8 def; +}; + +static const struct sx9500_reg_default sx9500_default_regs[] = { + { + .reg = SX9500_REG_PROX_CTRL1, + /* Shield enabled, small range. */ + .def = 0x43, + }, + { + .reg = SX9500_REG_PROX_CTRL2, + /* x8 gain, 167kHz frequency, finest resolution. */ + .def = 0x77, + }, + { + .reg = SX9500_REG_PROX_CTRL3, + /* Doze enabled, 2x scan period doze, no raw filter. */ + .def = 0x40, + }, + { + .reg = SX9500_REG_PROX_CTRL4, + /* Average threshold. */ + .def = 0x30, + }, + { + .reg = SX9500_REG_PROX_CTRL5, + /* + * Debouncer off, lowest average negative filter, + * highest average postive filter. + */ + .def = 0x0f, + }, + { + .reg = SX9500_REG_PROX_CTRL6, + /* Proximity detection threshold: 280 */ + .def = 0x0e, + }, + { + .reg = SX9500_REG_PROX_CTRL7, + /* + * No automatic compensation, compensate each pin + * independently, proximity hysteresis: 32, close + * debouncer off, far debouncer off. + */ + .def = 0x00, + }, + { + .reg = SX9500_REG_PROX_CTRL8, + /* No stuck timeout, no periodic compensation. */ + .def = 0x00, + }, + { + .reg = SX9500_REG_PROX_CTRL0, + /* Scan period: 30ms, all sensors enabled. */ + .def = 0x0f, + }, +}; + +static int sx9500_init_device(struct iio_dev *indio_dev) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret, i; + unsigned int val; + + ret = regmap_write(data->regmap, SX9500_REG_IRQ_MSK, 0); + if (ret < 0) + return ret; + + ret = regmap_write(data->regmap, SX9500_REG_RESET, + SX9500_SOFT_RESET); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val); + if (ret < 0) + return ret; + + for (i = 0; i < ARRAY_SIZE(sx9500_default_regs); i++) { + ret = regmap_write(data->regmap, + sx9500_default_regs[i].reg, + sx9500_default_regs[i].def); + if (ret < 0) + return ret; + } + + return 0; +} + +static int sx9500_gpio_probe(struct i2c_client *client, + struct sx9500_data *data) +{ + struct device *dev; + struct gpio_desc *gpio; + int ret; + + if (!client) + return -EINVAL; + + dev = &client->dev; + + /* data ready gpio interrupt pin */ + gpio = devm_gpiod_get_index(dev, SX9500_GPIO_NAME, 0); + if (IS_ERR(gpio)) { + dev_err(dev, "acpi gpio get index failed\n"); + return PTR_ERR(gpio); + } + + ret = gpiod_direction_input(gpio); + if (ret) + return ret; + + ret = gpiod_to_irq(gpio); + + dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); + + return ret; +} + +static int sx9500_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct iio_dev *indio_dev; + struct sx9500_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (indio_dev == NULL) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->mutex); + data->trigger_enabled = false; + + data->regmap = devm_regmap_init_i2c(client, &sx9500_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + + sx9500_init_device(indio_dev); + + indio_dev->dev.parent = &client->dev; + indio_dev->name = SX9500_DRIVER_NAME; + indio_dev->channels = sx9500_channels; + indio_dev->num_channels = ARRAY_SIZE(sx9500_channels); + indio_dev->info = &sx9500_info; + indio_dev->modes = INDIO_DIRECT_MODE; + i2c_set_clientdata(client, indio_dev); + + if (client->irq <= 0) + client->irq = sx9500_gpio_probe(client, data); + + if (client->irq > 0) { + ret = devm_request_threaded_irq(&client->dev, client->irq, + sx9500_irq_handler, sx9500_irq_thread_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + SX9500_IRQ_NAME, indio_dev); + if (ret < 0) + return ret; + + data->trig = devm_iio_trigger_alloc(&client->dev, + "%s-dev%d", indio_dev->name, indio_dev->id); + if (!data->trig) + return -ENOMEM; + + data->trig->dev.parent = &client->dev; + data->trig->ops = &sx9500_trigger_ops; + iio_trigger_set_drvdata(data->trig, indio_dev); + + ret = iio_trigger_register(data->trig); + if (ret) + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + sx9500_trigger_handler, NULL); + if (ret < 0) + goto out_trigger_unregister; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto out_buffer_cleanup; + + return 0; + +out_buffer_cleanup: + if (client->irq > 0) + iio_triggered_buffer_cleanup(indio_dev); +out_trigger_unregister: + iio_trigger_unregister(data->trig); + + return ret; +} + +static int sx9500_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct sx9500_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + if (client->irq > 0) + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->trig); + + return 0; +} + +static const struct acpi_device_id sx9500_acpi_match[] = { + {"SSX9500", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, sx9500_acpi_match); + +static const struct i2c_device_id sx9500_id[] = { + {"sx9500", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, sx9500_id); + +static struct i2c_driver sx9500_driver = { + .driver = { + .name = SX9500_DRIVER_NAME, + .acpi_match_table = ACPI_PTR(sx9500_acpi_match), + }, + .probe = sx9500_probe, + .remove = sx9500_remove, + .id_table = sx9500_id, +}; +module_i2c_driver(sx9500_driver); + +MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@xxxxxxxxx>"); +MODULE_DESCRIPTION("Driver for Semtech SX9500 proximity sensor"); +MODULE_LICENSE("GPL v2"); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
