On Wed, 2014-11-05 at 14:10 -0800, Gwendal Grignou wrote:
> Fixes code duplication, return of function.
>
> Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
> ---
> drivers/iio/magnetometer/ak8975.c | 33 +++++++++++++--------------------
> 1 file changed, 13 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
> index bf5ef07..12f0b00 100644
> --- a/drivers/iio/magnetometer/ak8975.c
> +++ b/drivers/iio/magnetometer/ak8975.c
> @@ -64,10 +64,10 @@
> #define AK8975_REG_CNTL 0x0A
> #define AK8975_REG_CNTL_MODE_SHIFT 0
> #define AK8975_REG_CNTL_MODE_MASK (0xF << AK8975_REG_CNTL_MODE_SHIFT)
> -#define AK8975_REG_CNTL_MODE_POWER_DOWN 0
> -#define AK8975_REG_CNTL_MODE_ONCE 1
> -#define AK8975_REG_CNTL_MODE_SELF_TEST 8
> -#define AK8975_REG_CNTL_MODE_FUSE_ROM 0xF
> +#define AK8975_REG_CNTL_MODE_POWER_DOWN 0x00
> +#define AK8975_REG_CNTL_MODE_ONCE 0x01
> +#define AK8975_REG_CNTL_MODE_SELF_TEST 0x08
> +#define AK8975_REG_CNTL_MODE_FUSE_ROM 0x0F
>
> #define AK8975_REG_RSVC 0x0B
> #define AK8975_REG_ASTC 0x0C
> @@ -166,8 +166,8 @@ static int ak8975_setup_irq(struct ak8975_data *data)
> irq = gpio_to_irq(data->eoc_gpio);
>
> rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler,
> - IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> - dev_name(&client->dev), data);
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + dev_name(&client->dev), data);
> if (rc < 0) {
> dev_err(&client->dev,
> "irq %d request failed, (gpio %d): %d\n",
> @@ -231,6 +231,10 @@ static int ak8975_setup(struct i2c_client *client)
> AK8975_REG_CNTL_MODE_POWER_DOWN,
> AK8975_REG_CNTL_MODE_MASK,
> AK8975_REG_CNTL_MODE_SHIFT);
> + if (ret < 0) {
> + dev_err(&client->dev, "Error in setting power-down mode\n");
> + return ret;
> + }
>
> if (data->eoc_gpio > 0 || client->irq) {
> ret = ak8975_setup_irq(data);
> @@ -241,11 +245,6 @@ static int ak8975_setup(struct i2c_client *client)
> }
> }
>
> - if (ret < 0) {
> - dev_err(&client->dev, "Error in setting power-down mode\n");
> - return ret;
> - }
> -
> /*
> * Precalculate scale factor (in Gauss units) for each axis and
> * store in the device data.
> @@ -550,24 +549,18 @@ static int ak8975_probe(struct i2c_client *client,
> /* Perform some basic start-of-day setup of the device. */
> err = ak8975_setup(client);
> if (err < 0) {
> - dev_err(&client->dev, "AK8975 initialization fails\n");
> + dev_err(&client->dev, "%s initialization fails\n", name);
> return err;
> }
>
> - data->client = client;
> mutex_init(&data->lock);
> - data->eoc_gpio = eoc_gpio;
> indio_dev->dev.parent = &client->dev;
> indio_dev->channels = ak8975_channels;
> indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
> indio_dev->info = &ak8975_info;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->name = name;
> - err = devm_iio_device_register(&client->dev, indio_dev);
> - if (err < 0)
> - return err;
> -
> - return 0;
> + return devm_iio_device_register(&client->dev, indio_dev);
> }
>
> static const struct i2c_device_id ak8975_id[] = {
> @@ -588,7 +581,7 @@ MODULE_DEVICE_TABLE(of, ak8975_of_match);
> static struct i2c_driver ak8975_driver = {
> .driver = {
> .name = "ak8975",
> - .of_match_table = ak8975_of_match,
> + .of_match_table = of_match_ptr(ak8975_of_match),
> .acpi_match_table = ACPI_PTR(ak_acpi_match),
> },
> .probe = ak8975_probe,
Looks OK to me.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
