Hi,
On 10/13/2014 06:00 PM, Mark Rutland wrote:
On Wed, Sep 24, 2014 at 01:56:55PM +0100, Stanimir Varbanov wrote:
+- qcom,ratiometric:
+ Usage: optional
+ Value type: <empty>
+ Definition: Channel calibration type. If this property is specified
+ VADC will use the VDD reference(1.8V) and GND for channel
+ calibration. If property is not found, channel will be
+ calibrated with 625mV and 1.25V reference channels.
+ Otherwise the absolute calibration will be used.
Surely this should be part of the specifier?
This is per channel type of configuration. Clients didn't and
shouldn't care how calibration is done.
Regards,
Ivan
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
