On 24/10/14 23:31, Hartmut Knaack wrote: > Daniel Baluta schrieb am 09.10.2014 14:39: >> From: Irina Tirdea <irina.tirdea@xxxxxxxxx> >> >> These changes are needed to support the functionality of a pedometer. >> A pedometer has two basic functionalities: step counter and step detector. >> >> The step counter needs to be enabled and then it will count the steps >> in its hardware register. Whenever the application needs to check >> the step count, it will read the step counter register. To support the >> step counter a new channel type STEPS is added. Since the pedometer needs >> to be enabled first so that the hardware can count and store the steps, >> we need a specific ENABLE channel info mask. >> >> The step detector will generate an interrupt each time a step is detected. >> To support this functionality we add a new event type INSTANCE. >> > Hi, > I was wondering, if it would be better to name this channel somehow more generic. What you are actually counting are some pulses, and only the implementation of the hardware leads to the interpretation of these pulses as for example steps. > Other devices for this category would be pulse counters - either stand alone, or as part of SoCs. Some use cases I could think of are: liquid/gas flow measurements, engine rotation/RPM counts, object counts, ... > Any opinions? I agree there might be potential here for a broader interface... RPM however would be a rotational speed measurement and hence in radians / second or radians if just a count of pulses off an encoder. We have just recently had a human pulse counter as well which is another count. The question to my mind is do we gain anything by making it more generic? Does it help userspace? Chances of having many applications that don't care about the difference between steps and other pulse counts is probably low so right now I'm (slightly) falling on the side of have these more specific counts. So what does everyone else think? Jonathan > Thanks > > Hartmut >> For more information on the Android requirements for step counter and step >> detector see: >> http://source.android.com/devices/sensors/composite_sensors.html#counter >> and http://source.android.com/devices/sensors/composite_sensors.html#detector. >> >> A device that has the pedometer functionality this interface needs to >> support is Freescale's MMA9553L: >> http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf >> >> Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx> >> Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx> >> --- >> Documentation/ABI/testing/sysfs-bus-iio | 22 ++++++++++++++++++++++ >> drivers/iio/industrialio-core.c | 2 ++ >> drivers/iio/industrialio-event.c | 1 + >> include/linux/iio/iio.h | 1 + >> include/linux/iio/types.h | 2 ++ >> 5 files changed, 28 insertions(+) >> >> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio >> index 12d0385..3557a69 100644 >> --- a/Documentation/ABI/testing/sysfs-bus-iio >> +++ b/Documentation/ABI/testing/sysfs-bus-iio >> @@ -842,6 +842,13 @@ Description: >> number or direction is not specified, applies to all channels of >> this type. >> >> +What: /sys/.../events/in_steps_instance_en >> +KernelVersion: 3.19 >> +Contact: linux-iio@xxxxxxxxxxxxxxx >> +Description: >> + Enables or disables step detection. Each time the user takes a step an >> + event of this type will be generated. >> + >> What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger >> KernelVersion: 2.6.35 >> Contact: linux-iio@xxxxxxxxxxxxxxx >> @@ -1072,3 +1079,18 @@ Contact: linux-iio@xxxxxxxxxxxxxxx >> Description: >> Raw value of rotation from true/magnetic north measured with >> or without compensation from tilt sensors. >> + >> +What: /sys/.../iio:deviceX/in_steps_enable >> +KernelVersion: 3.19 >> +Contact: linux-iio@xxxxxxxxxxxxxxx >> +Description: >> + Activates the step counter. After activation, the number of steps >> + taken by the user will be counted in hardware and exported through >> + in_steps_input. >> + >> +What: /sys/.../iio:deviceX/in_steps_input >> +KernelVersion: 3.19 >> +Contact: linux-iio@xxxxxxxxxxxxxxx >> +Description: >> + This attribute is used to read the number of steps taken by the user >> + since the last reboot while activated. >> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c >> index e453ef9..1e060f3 100644 >> --- a/drivers/iio/industrialio-core.c >> +++ b/drivers/iio/industrialio-core.c >> @@ -71,6 +71,7 @@ static const char * const iio_chan_type_name_spec[] = { >> [IIO_PRESSURE] = "pressure", >> [IIO_HUMIDITYRELATIVE] = "humidityrelative", >> [IIO_ACTIVITY] = "activity", >> + [IIO_STEPS] = "steps", >> }; >> >> static const char * const iio_modifier_names[] = { >> @@ -118,6 +119,7 @@ static const char * const iio_chan_info_postfix[] = { >> [IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain", >> [IIO_CHAN_INFO_HYSTERESIS] = "hysteresis", >> [IIO_CHAN_INFO_INT_TIME] = "integration_time", >> + [IIO_CHAN_INFO_ENABLE] = "en", >> }; >> >> /** >> diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c >> index a9c9f34..db63d29 100644 >> --- a/drivers/iio/industrialio-event.c >> +++ b/drivers/iio/industrialio-event.c >> @@ -198,6 +198,7 @@ static const char * const iio_ev_type_text[] = { >> [IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive", >> [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive", >> [IIO_EV_TYPE_TRANSITION] = "transition", >> + [IIO_EV_TYPE_INSTANCE] = "instance", >> }; >> >> static const char * const iio_ev_dir_text[] = { >> diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h >> index 15dc6bc..3d3f06f 100644 >> --- a/include/linux/iio/iio.h >> +++ b/include/linux/iio/iio.h >> @@ -37,6 +37,7 @@ enum iio_chan_info_enum { >> IIO_CHAN_INFO_HARDWAREGAIN, >> IIO_CHAN_INFO_HYSTERESIS, >> IIO_CHAN_INFO_INT_TIME, >> + IIO_CHAN_INFO_ENABLE, >> }; >> >> enum iio_shared_by { >> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h >> index 9a1cc01..af0b6e0 100644 >> --- a/include/linux/iio/types.h >> +++ b/include/linux/iio/types.h >> @@ -31,6 +31,7 @@ enum iio_chan_type { >> IIO_PRESSURE, >> IIO_HUMIDITYRELATIVE, >> IIO_ACTIVITY, >> + IIO_STEPS, >> }; >> >> enum iio_modifier { >> @@ -74,6 +75,7 @@ enum iio_event_type { >> IIO_EV_TYPE_THRESH_ADAPTIVE, >> IIO_EV_TYPE_MAG_ADAPTIVE, >> IIO_EV_TYPE_TRANSITION, >> + IIO_EV_TYPE_INSTANCE, >> }; >> >> enum iio_event_info { >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
