When reading temperature or humidity values, a shift of two bits to the right needs to be applied, and only for the humidity channel a mask of the lower 12 bits needs to be applied. This reduces code repetition. During probe, i2c_set_clientdata() was used, although its counterpart was not, so drop it. Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx> --- diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c index 62d74d3..b541646 100644 --- a/drivers/iio/humidity/si7020.c +++ b/drivers/iio/humidity/si7020.c @@ -56,10 +56,9 @@ static int si7020_read_raw(struct iio_dev *indio_dev, SI7020CMD_RH_HOLD); if (ret < 0) return ret; - if (chan->type == IIO_TEMP) - *val = ret >> 2; - else - *val = (ret & 0x3FFF) >> 2; + *val = ret >> 2; + if (chan->type == IIO_HUMIDITYRELATIVE) + *val &= GENMASK(11, 0); return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: if (chan->type == IIO_TEMP) @@ -133,7 +132,6 @@ static int si7020_probe(struct i2c_client *client, data = iio_priv(indio_dev); *data = client; - i2c_set_clientdata(client, indio_dev); indio_dev->dev.parent = &client->dev; indio_dev->name = dev_name(&client->dev); -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
