> Add the TI afe4403 heart monitor device tree
> binding documentation. heart_monitors directory
> created under iio.
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
> .../bindings/iio/heart_monitors/ti_afe4403.txt | 23 ++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/heart_monitors/ti_afe4403.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/heart_monitors/ti_afe4403.txt b/Documentation/devicetree/bindings/iio/heart_monitors/ti_afe4403.txt
> new file mode 100644
> index 0000000..d612dd6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/heart_monitors/ti_afe4403.txt
> @@ -0,0 +1,23 @@
> +* Texas Instruments - AFE4403 Heart rate and Pulse Oximeter
> +
> +The device consists of a low-noise receiver channel
> +with an integrated analog-to-digital converter (ADC),
> +an LED transmit section, and diagnostics for sensor and LED fault detection.
> +
> +Required properties:
> + - compatible: Must contain "ti,afe4403".
> + - ste-gpio: GPIO for the spi control line
> + - data-ready-gpio: GPIO interrupt when the afe4403 has data
> + - led-supply: Chip supply to the device
> + -
extra -
> +Optional properties:
> + - reset-gpio: GPIO used to reset the device via HW
> +
> +Example:
> +
> +&heart_rate {
> + compatible = "ti,afe4403";
> + ste-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
> + data-ready-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> + led-supply = <&vbat>;
> +};
>
--
Peter Meerwald
+43-664-2444418 (mobile)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
