This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
To: linux-iio@xxxxxxxxxxxxxxx
---
Changes since v1:
Rebased on top of togreg branch of IIO git
drivers/iio/adc/exynos_adc.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 43620fd..fe03177 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -39,6 +39,8 @@
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
@@ -90,11 +92,14 @@
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
+#define EXYNOS_ADCV1_PHY_OFFSET 0x0718
+#define EXYNOS_ADCV2_PHY_OFFSET 0x0720
+
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
void __iomem *regs;
- void __iomem *enable_reg;
+ struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
@@ -110,6 +115,7 @@ struct exynos_adc_data {
int num_channels;
bool needs_sclk;
bool needs_adc_phy;
+ int phy_offset;
u32 mask;
void (*init_hw)(struct exynos_adc *info);
@@ -183,7 +189,7 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
u32 con1;
if (info->data->needs_adc_phy)
- writel(1, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
/* set default prescaler values and Enable prescaler */
con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
@@ -198,7 +204,7 @@ static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
u32 con;
if (info->data->needs_adc_phy)
- writel(0, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V1_CON(info->regs));
con |= ADC_V1_CON_STANDBY;
@@ -225,6 +231,7 @@ static const struct exynos_adc_data exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
@@ -314,7 +321,7 @@ static void exynos_adc_v2_init_hw(struct exynos_adc *info)
u32 con1, con2;
if (info->data->needs_adc_phy)
- writel(1, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
con1 = ADC_V2_CON1_SOFT_RESET;
writel(con1, ADC_V2_CON1(info->regs));
@@ -332,7 +339,7 @@ static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
u32 con;
if (info->data->needs_adc_phy)
- writel(0, info->enable_reg);
+ regmap_write(info->pmu_map, info->data->phy_offset, 0);
con = readl(ADC_V2_CON1(info->regs));
con &= ~ADC_CON_EN_START;
@@ -362,6 +369,7 @@ static const struct exynos_adc_data exynos_adc_v2_data = {
.num_channels = MAX_ADC_V2_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV2_PHY_OFFSET,
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
@@ -374,6 +382,7 @@ static const struct exynos_adc_data exynos3250_adc_data = {
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
.needs_sclk = true,
.needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
@@ -558,10 +567,13 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (info->data->needs_adc_phy) {
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- info->enable_reg = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(info->enable_reg))
- return PTR_ERR(info->enable_reg);
+ info->pmu_map = syscon_regmap_lookup_by_phandle(
+ pdev->dev.of_node,
+ "samsung,syscon-phandle");
+ if (IS_ERR(info->pmu_map)) {
+ dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
+ return PTR_ERR(info->pmu_map);
+ }
}
irq = platform_get_irq(pdev, 0);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
